As tittle says....
With the nowadays VGAs drawing a LOT of current, I desided to build my OWN 12V PSU so as to be "ready" for benching and capable to handle the MOST hungry VGAs ever.....
It will be a TRUE 1000 Watts 12Volts PSU, capable of providing 84 Ampers at 12Volts and a PEAK of 100 Ampers+......
1000W/12V will be 24/7 power - continues - .......
It'll also have a built in circuit for Overcurrent and Overvoltage protection of each output separate.
It'll have it's own Digital Ampers meter so as to see what the VGA's draw...
Also a thermometer as well....
It will NOT be with 4 separate 12V rails BUT with ONE 12V and all the cables will be feeded in paraller from that rail......
I'll use a toroidal transformer at 14V/1500VA output....
Pictures will be uploaded as well as the construction begin...
The day before yesterday, I made the cables of it....
They are with sillicon instead of plastic matirial, capable for higher temps AND VERY THICK.....2.5 wires used.....
I made 5 of them.....4 that will be in use and one for spare/backup.....
Also it'll have some 4pin molex outputs for ALL the fans that will be needed here and there.....
I'll be back with details as soon as I start constructing......
ALSO inputs with oppinions of yours about what else should I add too, would be welcomed......
.
Bookmarks