Anyone running GiEL 3500 Cas 2 Stuff?

[Sage]

Would like to know just how far you can push em?

I can make 228 at 2.9v.. wondering if they like more volts or not?

Thanks for you input

[scorp]

Depends on the chips you have. Theoretically they would have Mosel Vitelic 5ns (that usually max out at ~230) ar Winbond CH-5 (which given enough voltage max out at 240-270, depending on how much votage and how lucky you are).

To recognize look the chips, without getting rid of the heatspreaders and the warranty, look at ths pics below :
Winbond chips :
http://www.xtremesystems.org/forums/...chmentid=28275
Mosel Vitelic chips :
http://www.xtremesystems.org/forums/...chmentid=28273
Hynix chips :
http://www.xtremesystems.org/forums/...chmentid=28272
Samsung chips :
http://www.xtremesystems.org/forums/...chmentid=28274

[Jeroen]

Thanx for de info scorp, help too me. I have another question:
Mosel or CH-5 is compatible at the same time with TCCD, over Athlon 64 machine?

For example, in four slots, 2x256MB TCCD and 2x256 Mosel or CH-5, what about timings?

I have a kit 2x256MB LC G.Skill.

[jjcom]

It may work, depending on other factors, but I wouldn't reccomend it. 4 dimms on the A64 don't play well. Your RAM overclock would probly turn into an UNDERclock. just a Limitation of the on die memory controller, Venice should help fix this issue but its unknown how well it will work even then

jjcom

[Sage]

thanks mate will check it out when i get home