I'm back - how do You think about 12 x 279 at CAS 1,5 ???

[HARDCORECLOCKER]

O.K. - after having some trouble with my G.SKILL ( no way to get 10 x 336 1:1 - saw 10 x 330 but unstable) I decided to throw in my BH-5.

So here it is at only 3,72 Vdimm with CAS 1,5 - best SuperPi I ever got so far:

<img src="http://img174.exs.cx/img174/4557/85192kn.jpg" alt="Image Hosted by ImageShack.us" />

and here:

<img src="http://img174.exs.cx/img174/8994/12x2799yd.jpg" alt="Image Hosted by ImageShack.us" />

Seems to be a nice value - what do You think guys ???

My problem is the TRTW - setting it to 1 sys crashes immedeately, but on my NEO2 I was able to run these BH-5 with TRTW 1. BIOS is 331-1.

So I think I have to change somethin' in the DFI BIOS - left all at AUTO, only set the basics to 2-2-2-5.

Does anyone know what to do ? THX !!!

[Muppetmower]

Isa that a bug on the CPU temp? 239!!!!!!!!

[HARDCORECLOCKER]

Isa that a bug on the CPU temp? 239!!!!!!!!

Yep - known BIOS bug, can't reed subzero temps.......

[Charloz24]

No it's because of subzero temp.

Hardcoreclocker: sweet results, glad your DFI is working great!

[d@rkn1ko]

you can use speedfan

[mrlobber]

The long wait pays it back

[metro.cl]

really nice oc

[Mastakilla]

holy

thats xtreme!

is that 2x 512MB?

[Mag Master 21]

Isa that a bug on the CPU temp? 239!!!!!!!!

That's because the temp is reported in Kelvin.

BTW: I heard if you manually set the values in A64 Tweaker in the BIOS instead, it's more stable.. However, if you do this, the scores/bandwidth tends to be slower. You may want to fool around with it..

[HARDCORECLOCKER]

holy

thats xtreme!

is that 2x 512MB?

2 x 256 MB - always better for benching mate...........

[blinky]

dude... u should be at 24.XXX with that cpu speed and mem speed

try using win2k3, and do the common tweaks

[HARDCORECLOCKER]

dude... u should be at 24.XXX with that cpu speed and mem speed

try using win2k3, and do the common tweaks

Yep, sure - but I'm comparing here also against myself and ever used WIN XP without tweaks so I try to get 24.xxx on it. More worth for me at all.

[SAE]

My problem is the TRTW - setting it to 1 sys crashes immedeately, but on my NEO2 I was able to run these BH-5 with TRTW 1. BIOS is 331-1.

So I think I have to change somethin' in the DFI BIOS - left all at AUTO, only set the basics to 2-2-2-5.

Great job, bro!

The trtw thingy ain't important though. I even noticed an increase in speed setting it from 1 to 2 with the 3200LL at 251MHz.

I am also using 331-1. Great bios so far.

[HARDCORECLOCKER]

Great job, bro!

The trtw thingy ain't important though. I even noticed an increase in speed setting it from 1 to 2 with the 3200LL at 251MHz.

I am also using 331-1. Great bios so far.

Oh, good to know, one thing I haven't to deal with anymore........

[krampak]

Really cool! However I got 34'8ns at only 264 2-2-2-5 with some CH5.
Now its time to make some tweaking

[EMC2]

Very nice results HCC Glad you have it sorted and humming again

Just an FYI for future reference... try a little smaller preamble time if you want to mess with Twtr, Trtw, Twt (3.5ns & 4.0ns helped here at 260M-270M range depending on other values). Async latency has an affect as well.

[HARDCORECLOCKER]

THX to You all for Your kind words - now everythin' seems to be O.K. again and I can wait for the FX-57 without hurry........

If I get bored I will give the G.SKILL another try maybe..........

Now droped the voltages for chipset down to 1,6 and for LDT down to 1,3 - no problem, rig is also stable at the lower volts. Also set Vcore to 1,77.

[komer]

nice scores out there,bh5 rules

[[XC] moddolicous]

Yea, nice results. BH-5 is still the best in my book. Crank it up to 285!

[HARDCORECLOCKER]

Best thing is BH-5 is below 3,8 Vdimm on DFI NF4 at that speed - always saw 3,8 - 3,9 usually.

[eva2000]

so you mean BH-5 cas1.5 clocks higher than cas2

yeah Trtw of 1 on my MSI K8N Neo2 is fine but on DFI NF4 SLI-D i need 2 as well

[cpulloverclock]

so you mean BH-5 cas1.5 clocks higher than cas2

yeah Trtw of 1 on my MSI K8N Neo2 is fine but on DFI NF4 SLI-D i need 2 as well

TRTW with 2 is better or has the same perfs than 1

[SAE]

TRTW with 2 is better or has the same perfs than 1

The trtw thingy ain't important though. I even noticed an increase in speed setting it from 1 to 2 with the 3200LL at 251MHz.

Like I said

[eva2000]

i get a 100MB/s boost in bandwidth with Trtw 1 but ain't stable heh

[pershoot]

awesome