Gskill LA @235 with 2-2-2-5

**Dumo** · 03-12-2005, 07:00 AM

Heres tccd440 2x512 @3.1V

**perry_78** · 03-12-2005, 07:13 AM

Considering its 1GB kit its excellent, though your 1GB LA kit is probably the best on this forum

**HiJon89** · 03-12-2005, 07:15 AM

I don't think his LE kit was too bad either, its in my system now, muhahah!

**~~Onepagebook~~** · 03-12-2005, 07:17 AM

Go dumo, I think it can go 3 mhz higher.

**jagzzzzzzz** · 03-12-2005, 08:59 AM

Would 243 FSB on 1Gig of LE wih a P4 be a respectable stable OC. 3.4GHz from a 2.8? I am going to try for the 3.5 after I move.

**Dumo** · 03-12-2005, 11:20 PM

This memory is flexible...I can run it @240 with 2-2-2-5 or @338 with 2.5-4-3-6 all 1:1.....Pick the timings

**blinky** · 03-13-2005, 12:03 AM

use large memory pages

also try 2.5-2-2-5

**TommyW** · 03-13-2005, 12:52 AM

WOW

ahhh this memory too expensive here 2000nis

+400$ and more

**mdzcpa** · 03-13-2005, 05:12 AM

I agree that the LA is particularly flexible, but what's the point of running them at low mhz and tight timings when running them higher nets much more bandwidth? Although I am running Gskill in both of my DFI NF4 rigs with success at higher mhz, I would think there is better memory choices for low mhz and tight timings (like OCZ VX).

Not criticizing, just curious as to whether there is any advantage at all to running the LA lower with tight timings.

**Dumo** · 03-13-2005, 06:41 AM

Originally Posted by mdzcpa

Not criticizing, just curious as to whether there is any advantage at all to running the LA lower with tight timings.

Lower htt and high multi with 3.1V max vdimm for longer 3d benches (3d 01)..... 235x15 compares to 319x11....

**ken** · 03-13-2005, 06:43 AM

is that Memtest, Prime stable or just SiSoft bench?

**Dumo** · 03-13-2005, 06:53 AM

Dont really care about memtest as long benched ok. It is not my 24x7 setup.

**HARDCORECLOCKER** · 03-13-2005, 06:56 AM

Nice number again DUMO..........

**mdzcpa** · 03-13-2005, 07:22 AM

Originally Posted by Dumo

Lower htt and high multi with 3.1V max vdimm for longer 3d benches (3d 01)..... 235x15 compares to 319x11....

But you're giving up serious memory bandwidth. It takes closer to 250 to 265 at 2-2-2-5 to catch 300mhz+ with looser timings.

You should be able to stable bench with 9MB in sandra.

Still confused

EDIT - Nice scores none the less Dumo

**Dumo** · 04-07-2005, 02:11 AM

Combined with 2X512 Blue mushkin and the result is good even with 2T...

Thread: Gskill LA @235 with 2-2-2-5

Thread Tools

Search Thread

Rate This Thread

Display

Gskill LA @235 with 2-2-2-5

Bookmarks

Bookmarks

Posting Permissions