OPB's New BH-5 records(FSB) on DFI SLI-DR

[Onepagebook]

all benchmarks have Digital camera version:
Let's see some actions:
Vdimm--->4v
pi 1m



DC:



bandwidth:



DC:




**not really maxout yet..

[mcnbns]

That Super Pi looks a little high... some guy in the Xtreme Overclocking section got 27s with a winchester at 2991MHz... Aside from that small issue, very XTREME!

[Bennah]

oh very nice...

how about 3d mark 01?

[killingspreez]

not bad!
it seems that they really improved the chip!
i think 27xmhz were the maximum with the "old" chips right?!

mfg

[kristos]

No matter what ram you use OPB, you get the best out if it every single time



PS: is this "new" BH-5 as in "new production twinMOS SpeedPremium ddr450"?

or just some new sticks for you?

[Onepagebook]

oh very nice...

how about 3d mark 01?

someone get me x850xt pe..

OPB

**by the way, I forgot to mention, it's running under win2k3

[Onepagebook]

No matter what ram you use OPB, you get the best out if it every single time



PS: is this "new" BH-5 as in "new production twinMOS SpeedPremium ddr450"?

or just some new sticks for you?

that's my very old mushkin pc3500 level II, and I took the heatspreaders out!

OPB

[SlackeR]

not bad!
it seems that they really improved the chip!
i think 27xmhz were the maximum with the "old" chips right?!

mfg

These must be old BH-5 if that is what you mean..
I don't think anyone has the new stuff.
It is very possible, though, both Tom Haolck and CPULLOVERCLOCK has been past 300 2-2-2 afaik. And Bigtoe saw a great improvement in BH-5 oc on the DFI boards too.

edit: Too slow

[F|apDro|`]

Omg but still ... I all over my desk


:banana4:

[RocKer]

3.9vdimm thats quit xtreme OPB :thumbsup: .

I did 10x253 at 3.14vdimm(mm) on my dfi nf3 250,tonight i will see how far the will go at 9x or 8x.

I hope i get some lucky vibes from you ,you have alot of them,nice x-files mem and nice old mem .

[Onepagebook]

These must be old BH-5 if that is what you mean..
I don't think anyone has the new stuff.
It is very possible, though, both Tom Haolck and CPULLOVERCLOCK has been past 300 2-2-2 afaik. And Bigtoe saw a great improvement in BH-5 oc on the DFI boards too.

edit: Too slow

Ya, I know it's too slow..
will study more..


OPB

[Holst]

Nice clocks mate, very nice

There are quite a few OS tweaks to get that SPI time down if you can be bothered..

But I would rather see some 3dmark01 runs myself

[MaxxxRacer]

wow.. i almost shat myself. I havnt even gotten my tccd up to that speed yet, and your doing it with bh5... its a crackup that bh5 started out a pc2700 memory.

[eva2000]

bandwidth probably hurting a bit due to Trc, Trfc and Max Async Latency settings ?

[Onepagebook]

bandwidth probably hurting a bit due to Trc, Trfc and Max Async Latency settings ?

thank you all experts here,

Eva2000, yes,
but when I try to give that better parameters, honestly, I can't run anything.
well, I think async latency is about right there. 290+ fdb is kinda hard to run 6ns or 7ns though. But trfc..I will check it out. thank you very much.

opb

[Smy]

nice bh5

[eR1k]

That's just too fast

[bachus_anonym]

Finally, 4V

That's what I was thinking about bandwidth too...

On Neo2/Winnie/Bh-5 I get efficiency of 91%/89% @ 272x10 but that's with 7-12... but I don't think you'd be able to tighten those timmings and still run same speed, though

Excellent work, regardless.... Would be nice to see some 3D action, too OPB

[QuadDamage]

not bad OPB. Let's see if you can beat Mr.Icee's 310 1:1 2-2-2-5 done on AN50-R/3200+ and OCZ ram

[bachus_anonym]

not bad OPB. Let's see if you can beat Mr.Icee's 310 1:1 2-2-2-5 done on AN50-R/3200+ and OCZ ram

do you have any screnies of that? i so want to see it

[Onepagebook]

not bad OPB. Let's see if you can beat Mr.Icee's 310 1:1 2-2-2-5 done on AN50-R/3200+ and OCZ ram

Is that just screen capture or do pi and sandra?
If that's benchable..then I have no way to beat it by using only 4v..

OPB

[Noktar]

Very very nice score OPB !
I'm expacting more

[Salkcin]

I just played with a pair of Mushkin LVL2 PC3500 (2x512MB) to, but that's on a Intel platform - they're maxed 43MHz below your results (DDR500 2-2-2-5 - 3,3v).... they are ing insane your results!!

[cpulloverclock]

OPB, u can try a memory bench and superpi with a winchester cpu?
to see if 293.6 is ok



thx

[Zeus]

not bad OPB. Let's see if you can beat Mr.Icee's 310 1:1 2-2-2-5 done on AN50-R/3200+ and OCZ ram

Sorry to say but some time ago i dug up those screenie's and found that his screens were with ,5 multi's.

Off course back then nobody knew about that divider thing.

I think the RAM ran 283 or something if my memeory serves me right.