DFI S939 soon on web!

**Dirt** · 01-03-2005, 01:13 PM

Dont you think vDimm from 3,3-4,0 will be enabled after setting some Expert Mode or something. Seems strange with a spectra that starts as high as 3,3 volt.

**perry_78** · 01-03-2005, 01:14 PM

Oh the Vcore will be usefull

Im not a guru like OPP to make my own cascades, im sure i would try if i got a FAQ/walkthrough (wink wink hint hint

), so untill further notice it will only be a VapoLS, around June. My chip isnt the best, but it should do some 3400 @ 2.1Vcore

Cant wait untill Venice

**OPPAINTER** · 01-03-2005, 01:17 PM

Originally Posted by TS_PHI_PERRY_78

Oh the Vcore will be usefull

Im not a guru like OPP to make my own cascades, im sure i would try if i got a FAQ/walkthrough (wink wink hint hint

), so untill further notice it will only be a VapoLS, around June. My chip isnt the best, but it should do some 3400 @ 2.1Vcore

Cant wait untill Venice

I don't make my own Cascades. PCIce makes my cascades.
If I did make them, they would be the best

OPP

**NWEng** · 01-03-2005, 01:19 PM

I've skipped over several mobos waiting to upgrade my A8V 1.02, this looks like a winner so far!

**perry_78** · 01-03-2005, 01:20 PM

The Dual Xpress Graphics Function supports the following:

Two PCI Express x16 Graphics Cards"

Does this mean X800XT in Dual mode? :banana4:

**charlie** · 01-03-2005, 01:20 PM

$299USD and they'll sell out faster than believed possible......

C

**Jessfm** · 01-03-2005, 01:21 PM

Originally Posted by charlie

$299USD and they'll sell out faster than believed possible......

C

WHAT ?

**Dirt** · 01-03-2005, 01:23 PM

Originally Posted by charlie

$299USD and they'll sell out faster than believed possible......

C

Well I know Im gonna have one, and I dont care what it costs.

**Nube** · 01-03-2005, 01:23 PM

Originally Posted by Jessfm

Its only safe to supply ram with the volts that the ram is specced for. Anything over that and your on your own. Just cos its available does not mean you can use it, although everyone here is likely to try it

so i can select 3.5vdimm to VX ram and it will be okay without any extra cooling

would ocz 520w PSU be okay for that ?

**NiCKE^** · 01-03-2005, 01:24 PM

Insane board!! I do need to get a rid of my MSI now and buy a DFI+PCI-E card(s).

**Dirt** · 01-03-2005, 01:27 PM

Well im just looking for a place in sweden to preorder the mobo:

3500+ Winchester, OCZ PS 520W and a 6800GT is ordered. Just cant decide if i should change to a X850XT or not

**perry_78** · 01-03-2005, 01:29 PM

Now the question is, which boards are ye getting?

**charlie** · 01-03-2005, 01:30 PM

And it'll be worth EVERY penny.

The "Definitive" motherboard has arrived.............

**OPPAINTER** · 01-03-2005, 01:31 PM

Originally Posted by Nube

so i can select 3.5vdimm to VX ram and it will be okay without any extra cooling

would ocz 520w PSU be okay for that ?

OCZ 520W better be OK with it, that's what I have

OPP

**perry_78** · 01-03-2005, 01:31 PM

Looks like nF4 SLI-DR to me :/

What is UT anyways? Obviously NF4 SLi-DR is better than UT NF4-SLI-DR as its the top model :|

**Doumz** · 01-03-2005, 01:36 PM

Ut mean the board only,like any other mb maker sell

the normal lanparty come with everything,cable,pc transpo,etc

**iboomalot** · 01-03-2005, 01:37 PM

hummm I got a X800XT being replaced thats AGP I could trade that in for a PCI X800XT

two questions

1. would a X800XT pci card work on this??

2. my 3700eb is stable on my A8V at 3-2-2 @ 247 and 3-2-3 @ 259 with 2.8ish volts. What would you guess my EB could run with 4v avil to it???

**OPPAINTER** · 01-03-2005, 01:41 PM

Originally Posted by iboomalot

hummm I got a X800XT being replaced thats AGP I could trade that in for a PCI X800XT

two questions

1. would a X800XT pci card work on this??

2. my 3700eb is stable on my A8V at 3-2-2 @ 247 and 3-2-3 @ 259 with 2.8ish volts. What would you guess my EB could run with 4v avil to it???

1)The X800XT will work no problem.

2) I don't think EB will like that much voltage, wild guess says around 280MHz with about 3.5V.

OPP

**~~choseone214~~** · 01-03-2005, 01:45 PM

I want to see what it will do with the same parts Opp had in the neo2 the bh-5, fx55+x800xt at the same clocks in 3dmark 2001

I wonder if it will be as fast, faster or slower

.

**Dirt** · 01-03-2005, 01:53 PM

What does: "Diagnostic LED connector" and "FronX" mean??

**idleuser** · 01-03-2005, 01:56 PM

Originally Posted by TS_PHI_PERRY_78

Now the question is, which boards are ye getting?

The cheapest I can't afford

**D_o_S** · 01-03-2005, 01:58 PM

Originally Posted by Dirt

What does: "Diagnostic LED connector" and "FronX" mean??

Diagnostic LED connector is probably something like MSI's D-Bracket leds. FrontX is a front bay device with all the handy connectors (USB, audio) upfront...

THANK YOU VERY MUCH FOR THE MANUAL

I'm sure that this will change the lives of many people...

**Fewture** · 01-03-2005, 01:58 PM

Originally Posted by charlie

And it'll be worth EVERY penny.

The "Definitive" motherboard has arrived.............

Well..lets see about that. Specs are nice, but I have only seen 1 bench so far and it didn't give a clear picture. So we really know nothing about this board other than it has potential on paper

The only thing that makes me cheer atm is the fact that Oskar has been involved in the design

**Dirt** · 01-03-2005, 02:01 PM

With the risk to be laughed at... who is this Oskar fella?

D O S: Okey. I need the DFI UT nF4 SLI-DR then

**Kriller** · 01-03-2005, 02:07 PM

Oscar_Wu from some french forum right?

Thread: DFI S939 soon on web!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions