NEW VERSION! 1.50 now. Download here - 200 KB
1) Processor test - leave ONLY CPU (FPU) checkbox checked.
2) Settings - make processor check "long" by dragging the slider left.
3) Start Testing! [60 min test]
On my system, this prog heats up the CPU 5 degrees above prime running small FFTs. Just thought many of ya could use this for stability testing. Post if you've never seen a temp this high on your system
Last edited by IvanAndreevich; 01-29-2005 at 12:40 PM.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
i've seen 64° oO, with prime, i got 61°!
Better (=hotter) than cpuburn?
Need for Speed Underground 2 got my CPU running hotter than prime ever did. :-/
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
Torin
Did you try this?
macci
I think so. Give it a try - can't hurt IMO
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
Danm no 'haaa hooo hootttt' smiley hehe, soand hopefully not
Tried S&M.....an appropriate name for what happens to the poor cpu
S754 3400+ Claw aircooled @2.6Ghz, 1.81vcpu, idle @ 37C, max in the 15 minutes of S&M was 47C, so 10C max rise in temp. average probably 9C.
Got to do a little off this
mad mikee
How many degrees did the temp rise from previous top temp?
stevehat1
Only 10 degrees up from IDLE? Did you do FPU only?? Cause my buddy with a 2500+ Mobile got his chip running 10 degrees ABOVE Prime95 small FFTs
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
FPU only. This test seems to raise CPU temps quite well, I don't think my cpu will pass 15 min prime at the same clocks, but I don't use prime for checking stability. When this thing isn't benching it running F@H. I find what F@H runs at then back down a little and run it there 24/7mad mikee
How many degrees did the temp rise from previous top temp?
stevehat1
Only 10 degrees up from IDLE? Did you do FPU only?? Cause my buddy with a 2500+ Mobile got his chip running 10 degrees ABOVE Prime95 small FFTs
Wow it heated my stuff up pretty good.
EDIT: It finds memory errors quicker then memtest too lol I dont think I like this proggy!
Last edited by twiggy; 12-24-2004 at 11:56 PM.
twiggy
Yes, this is the kind of result I get - 5 degrees higher than prime. Memory test IS pickier than Prime @ large FFTs too
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
it sure does burn my vapo'd cpu up fast.
is there an option where i can loop it?
Stick a Vapo on it
Previous post tells all
Read title hehe.
Sures helps set paste faster, ran it a few times and lower every time. Stuck @ about 52-53 max. Priming 1024-4096 to get the memory chugging, even w/ blend only up to 48c now
Memory test sends me back to the minors w/in 3 minutes, so back to priming
Shane5578
I believe the loop isn't included in the current release. I am willing to be it will be in something that is more final
mad mikee
Nice rise from Prime small FFTs
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
bump
Just gave this a go, sure gets mine a lot hotter than anything else i've tried yet!
All along the watchtower the watchmen watch the eternal return.
STEvil
4-5 C?
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
not bad, a gd 5-8° increased over prime.
So on the settings screen, from left to right,
Processor check: long, everything else unchecked
Tests: CPU (FPU) is only one checked
Memory checking: long, everything else unchecked
Should I even change anything with the memory checking? I want to start using this app as my stability tester, and I just wanna know how exactly a few of these things should be set to ensure I'm getting fairly dependable results out of this program.
• Intel Core i7 875K @ 3.86GHz 1.35v /w Intel Extreme Tower Heatsink
• Intel Extreme DP55KG
• 2x2GB Kingston HyperX PC3-10666
• ATI HD5970 2GB @ 850/1,200
• Lian-Li PC-7B
• Corsair TX750 PSU
yeah, 4-5c above prime.
All along the watchtower the watchmen watch the eternal return.
Ahh
My Athlon @2.6GHz @1.84v Primes for months non stop @~46C max, with this program it stops with the "failed" error within 3 mins.
I also notice my 12v rails jumps above 13v while running this, must replace my POS 550w Q-Tec ASAP!
Comparison against CPUburn k7 and others:
http://testmem.nm.ru/snm.htm
Latest version will also be at that page (currently same as the original linked at the top of this thread).
Hehe, too bad I can't read it.....and my translator doesn't like it either.
• Intel Core i7 875K @ 3.86GHz 1.35v /w Intel Extreme Tower Heatsink
• Intel Extreme DP55KG
• 2x2GB Kingston HyperX PC3-10666
• ATI HD5970 2GB @ 850/1,200
• Lian-Li PC-7B
• Corsair TX750 PSU
Seems my problem is purely heat related, anything at/above 50C and the test would cap out immediately (by decreasing the tornado fan speed), it passed the 1 hour FPU test @2.5GHz with 1.76v as the temp only tops out at 44C.
Gonna have to add a custom liquid cooling setup to the list...
stealthbomber
Yes, my friend had the same problem on a aircooled XP-M 2500+. It's stable in Prime, but this prog just made it 8C hotter so his computer would crash.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
Burnk7 (for socket A/462) is still the best imho, it's way hotter than prime95 and probably this too. I'll do a comparison sometime.
Posting Permissions
Reply With Quote
Bookmarks