DDR710 256MBX2 1T CL3 4-4-8 2.85V
DDR710 256MBX2 1T CL3 4-4-8 2.85V
Impressive. 2x256 sticks? How about 4?
Sigs are obnoxious.
I Think it can't @ 1T if U don't show A64Tweaker + Everest + CPUZ n Show timing on Sisoft Sandra.. . Because U can do some cheat that I can do... hehe sorry...
Nice results, although the bandwidth suck. 7.3K, with 310Mhz 2.5-3-3-5 1T you will hit more.
If you take a Good look at the screen, hint right.Originally Posted by Zanr Zij
four will definitly give problems, 4x256 is worser then 2x512MB
Last edited by kakaroto; 12-18-2004 at 08:32 AM.
256x4 is bad
Nice results, although the bandwidth suck. 7.3K, with 310Mhz 2.5-3-3-5 1T you will hit more.
If you take a Good look at the screen, hint right.
Because U don't know the way ... sorry
Original picture
That is very impressive.
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Thats amazing. It's like PC-5600.
My EB gets 7.3k sandra with 250MHz @ 3-2-2 1t.
But ddr710 is still pretty cool
"Nice results, although the bandwidth suck. 7.3K, with 310Mhz 2.5-3-3-5 1T you will hit more."
thats 3-4-4-8 timings for ya and thats why amd isnt interested in supporting ddr2, its too expensive and its high latencies would negate the advantage of 300+ fsb anyway. how stable is your ddr710 by the way?
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
pfff.....not impressive - with CMD 2T
with PC-5600 @ 1T you should get about 10k @ Sandra bandwidth....
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Is that 1t or 2t?
Intel E6400 @ 3.2GHZ (1.35v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
thats what you get for loose timings! cas3 7.3k with ddr710 should be getting a lot higher
Yeah 2T kills all the nice performance you would get on 355...
look on the far right screen, its says command rate, 1T.
really simple answer: he lies......
every idiot gets >8k with ~290MHz @ DC.....so, now we just get <7500MB/s with horrible 355MHz ?!
pfff...
EDIT: ok, noe i relize the extreme low multiplier.....that could be the reason.....how we all know, the A64-MC gives lower bandwidth with lower multiplier.....
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
he really has 1T
the reason bandwidth is so low is because his cpu is running at a low speed, pop a 3.4ghz proc in there and hed see 9k
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
1T or 2T? The software shows in the picture
There is comparative test of 1T or 2T to here
http://www.xtremesystems.org/forums/...ad.php?t=48167
I need it more hard , OSKAR _ WU has already reached DDR740 Level of 1T CL3 6-6-12
its the timings dude, 3-4-4-8 suck, plain and simple. its still good at ddr710 but run ddr600 with better timings and watch the bandwith go up
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
no its not dude, its his cpu speed
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
K8 2.4G 1T DDR600 CL2.5 4-4-8
K8 2.4G 2T DDR600 CL2.5 4-4-8
2.7G 1T DDR600 CL2.5 4-4-8
2.7G 1T DDR600 CL2.5 3-3-5
2.7G DDR676 1T CL3 4-4-8
1T OR 2T?
All that Sandra "theoretical bandwidth" is great - run some real world app benchmarks now and you'll see that 7GB vs 8GB memory bandwidth is overkill anyways
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Um..duh? Isn't that the whole point to this forum. It is called Xtreme...All that Sandra "theoretical bandwidth" is great - run some real world app benchmarks now and you'll see that 7GB vs 8GB memory bandwidth is overkill anyways
Intel E6400 @ 3.2GHZ (1.35v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
Just do the short cut (with out sweat)I'm J/K
With the same Gskill
Posting Permissions
Reply With Quote
Bookmarks