Temp comparison thread.

[JBELL]

ok guys post 'em if you know 'em!!


CASE:
Swifty QPower (from www.xtwerkz.com)

Processor:
2.0a GHZ northwood @ 2.3 GHz (From SSS; Higher OC to come later!)

Temps:
Case temp @ 28c/82f
C P U temp @ 34c/93f

Temp Program:
Temps taken from ASUS PC Probe (P4T533 Motherboard)

Measurement Time:
Rig at 100% load for 2 days

voltages:
12v @ 12.416
5v @ 5.16
3.3v @ 3.376
vcore @ 1.648

PSU:
Enermax EG651P-VE FMA (STOCK!! no POT modifications)

[FRAGN'STIEN]

With my own home built waterblock:

Ambient, indoor/outdoor therm: 23°c
System, MBM reading winbond : 27°c
Water, inline term: 27°c
CPU idle reading XP diode: 32°c
CPU full load reading XP diode running toast: 37°c

XP 1600 @ 1743 (166x10.5 1.80v)

[Eyecannon]

AXP 1600+ @ 1.833Ghz @2.25v
Ambient: 25°C
Idle: 19-22°C
Full Load: 33-36°C
Temp read with flat thermistor right next to core
Bong cooled

http://eyecannon.com/1(2).jpg

http://eyecannon.com/bong.html

[Marci]

Case: Chieftec AH-001SLD Aluminium Tower
CPU: AMD Athlon XP2400+ TBred core @ 2.5Ghz
Case Temp: 33deg
CPU Temp: 39deg
Temp Program: MBM5
Meas. Time: 100% Load, 3 days
Voltages: 1.58 (AGP) 5.03 (5v) 12.22 (12v) 1.87 (vcore)
PSU: Enermax 431w 465Whisper

Watercooled with Swiftech MCW462UH, DTek Heater Core, Eheim 1048 Pump.

[mdzcpa]

CASE:
Swiftech QPower with Peltier Upgrade
MCW-462UT (226w pelt)
MCW-50T (80w pelt)

Processor:
XP 2700 at 2630mhz (202 x 13...24/7 setting)

Goodies
XP 2700
2 x 256 Corsair XMS3500
R9700 Pro
Rocket RAID Card w/ 2 x 40g ATA 133 Maxtors
Turtle Beach Santa Cruz
DVD/CD
4 Fan Rheobus
Linksys NIC

Motherboard
Abit KD7-E

Temps:
Case temp loaded with Folding @ 39
CPU temp loaded with Folding @ 19

Temp Program:
MBM 5.2.1.0

Measurement Time:
Rig at 100% load while Folding for 4 days

voltages:
12v @ 12.04
5v @ 5..05
3.3v @ 3.33
vcore @ 1.90
DDRv @ 2.85

PSU:
Antec True Power 550w

[Hardass]

CASE:
Swiftech Q, Pwr with Pelts
CPU, 226W
GPU, 80W

PROCESSOR:

1600@1938MHz 184.6 X 10.5

MOBO:

EPOX 8K3A+

TEMPS:

Case Temp W/Full Load. F@H 27c
CPU Temp W/Full Load F@H 24c

MEASUREMENT TIME:

Running F@H for over a month!

VOLTAGES:

12v @ 12.34
5v @ 4.84
3.3v @ 1.54
Vcore @ 1.95

PSU:

TTGI 520W.

[X Men SS]

Case :
Enlight ****
GPU, 80W

CPU:

1700+@1907MHz 173.37 X 11

Mobo :

Abit KX7-333R (silver caps)

Temps:
Case temp @ 30C
C P U temp @ 38C

Temp Program :
MBM 5.2.0.0

Measurement Time :
Rig at 100% load for 1 day

Voltages:
12v @ 11.92V
5v @ 4.95
3.3v @ 3.47
vcore @ 1.71

PSU:
Enermax EG465AX-VE(G) FMA

[JBELL]

Originally posted by Hardass




VOLTAGES:

12v @ 12.34
5v @ 4.84
3.3v @ 1.54
Vcore @ 1.95

PSU:

TTGI 520W. [/B]

DUDE your voltages are whack!!!

[KnightElite]

Originally posted by JBELL
DUDE your voltages are whack!!!

Those actually aren't too bad. MBM is just reading the AGP voltage instead of the real 3.3V line .

[Hardass]

Originally posted by JBELL
DUDE your voltages are whack!!!

Thats the TTGI I bought that looks different then all the other TTGI I have. It,s the only one with the pot turned up it still has a 5v line under 5.00. Put it is doing the job.

[megatron]

Case :
Globalwin 802 with 6 blowholes for 80mm fans (running case bear atm) aka Coolercase Tornado from www.overclockers.co.uk (Noisy as hell @ 12v fans)

GPU stock ati heatsink fan

CPU:

xp2400+ 166Mhz * 12

Mobo :

Epox 8RDA+ with unlocking official bios

Temps: (The result is based very heavily on what the weather is like)
Case temp @ 26C
C P U temp @ 37C

Temp Program :
CPUcool no longer free so Epox USDM

Measurement Time :
Surfing (at idle)

Voltages:
12v @ 12.34
5v @ 5.05
3.3v @ 2.62
vcore @ 1.70 reported bios says 1.5 and its at default

PSU:
Enermax EG651 (as sig)

[hedge]

Case

CasEdge
Modded to fit:
2 120mm fans
1 92mm fan
Ice Pro Radiator

Cpu
Athlon XP 2100+@2013 @1.65 V
cooled by Maze2c from danger den

MBM5 temp readings

Idle Temp:
24 C
Load Temp:
27 C

PSU
Antec 350W

Hedge

[Nebulous]

Case: Chieftec Fully modded:
2-92mm ThermalTake fans-39cfm ea. In front
2-80MM ThermalTake smartfan1 In rear
1-80MM vantec stealth side intake

Cpu: XP2100 Tbred B 304 @ 2525Mhz(12.5x202) @ 1.9v
w/ MXL Miro WB

MBM5:
CPU-25c Idle
Full load: 28c Folding 27/7


Case: 26c

Psu: TTGI 520w
Vcore: 1.9v
+3.3v:3.35v
+5v :5.11v
+12v :12.80v
Vdimm:3.09v


Custom built water cooler:
http://overclockers.com/tips1067/


-N-

[Spec3]

Cooling

Swiftech MCW5000-A
Home made water bong
400GPH Powerhead 802
all on 1/2" ID tubing

CASE:
Antec SX1040B

Processor:
AMD XP1700+ @2324Mhz 10.5x221.3Mhz

Temps:
Case temp @ 21C
C P U temp @ 31C

Temp Program:
USDM for Abit NF7-S rev 1.2

Measurement Time:
Rig at 100% load for a day

voltages:
12v @ 12.05
5v @ 5.19
3.3v @ 3.36
vcore @ 1.68

PSU:
Antec 400W

[nick9802]

CASE:
Koolance PC2-601BW

Processor:
3.06 GHZ hyperthreading Enabled! @ 3.52 GHz (23 x 153)

Temps:
Case temp @ 24c, 21 ambient
C P U temp @ 29c

Temp Program:
according to bios on soyo p4x400 dragon ultra board

Measurement Time:
Quake3 arena all details, 1600x1200, 3 hours, close, and restart

voltages:
12v @ unk at the moment.. at work now
5v @ unk at the moment.. at work now
3.3v @ unk at the moment.. at work now
vcore @ unk at the moment.. at work now

PSU:
unk at the moment.. at work now

[CSOFT]

CASE:
LianLi PC70

PROCESSOR:

2100+@2.42MHz 220 X 11

MOBO:

Asus A7N8X Rev2 Chipset@1.85V, DDR@3.01v, CPU@2.05V

TEMPS:

Case Temp W/Full Load. 3DMark03 loop 24c
CPU Temp W/Full Load 3DMark03 loop 38c

MEASUREMENT TIME:

2 Hours

VOLTAGES: (Asus Probe / Multimeter)

12v @ 12.48 / 12.75
5v @ 4.97 / 5.24
3.3v @ 3.3 / 3.3
Vcore @ 2.048 / NA

PSU:

EG651 Modded

[Bundles]

CASE:
Full tower

PROCESSOR:
XP1700+ @ 2525.5mhz

MOBO:
Asus a7v8x

TEMPS:
Case Temp W/Full Load. 25oC
CPU Temp W/Full Load. 37oC

MEASUREMENT TIME:
Running seti for over a 3 months

VOLTAGES:
12v @ 12.44
5v @ 4.88
3.3v @ 3.29
Vcore @ 1.825
Vdimm @ 2.85

PSU:
Q-tec 550w single ADDA fan

COOLING:
vauxhall cavalier heatercore, hozelock 850lph pump, maze 3 waterblock, home made res and radbox, Codeflex tubing

All temps taken using calibrated Thermal probes and an LCD display.

[gobbo]

CASE:
Lian Li PC60

Processor:
1700+ @ 2400mhz @ 1.8v

Temps (Load):
Case temp @ 31c
CPU temp @ 39.5c

Temp Program:
Onboard mobo (Abit NF7-S Beta Bios) Winbond Hardware doctor

Measurement Time:
Rig at 100% for 14 hours

voltages:
12v @ 11.62
5v @ 4.97
3.3v @ 3.28
vcore @ 1.808

PSU:
Q-Tec Gold 450w

Cooling:
OCPC Atlantis Rev 3
ThermoChill 120mm rad
Papst 120mm
Eheim 1048

Currently jsut cooling CPU with that setup.

[saaya]

case:
no name (VERY good case though!)

cpu:
1700+ (tbred-b) @11x200@1.80v

temps (load):
45°C cpu

temp program:
winbond

meassurement time:
gaming for 16hours (lan)

voltages:
12v=11.73
5v=5.12
3.3=3.19
vcore=1.83

PSU:
fsp fortron 350W (relabeled 450W )

cooling:
coolermaster cp5-7jd1b silent cooler
3 case fans@7v=silent (zalman heatpipe sandwiched with 2 casefans and one fans sucking in cool air in the front)

[cowpuppy]

I bought a chiller of E Bay for a $100.00 and 80.00 shipping from Cal. Without having to invest a dime it preforms absolutly great.
Here is a screan shot after making a run in 01. The bottom temp is cpu temp. This is after 4 or 5 hrs of benchmarking. it was a cool morning about 40ish and low humidity.

[megatron]

Originally posted by cowpuppy
I bought a chiller of E Bay

Obviously its pretty big, but what else can you tell about this chiller? Any links or advice on what is suitable, and does it have a thermostat to control temperature? Any condensation issues? Having run a pelt, I don't like condensation, and would rather avoid having to deal with it. Thx.

[Teus]

CASE:
Koolance PC2-C modded:
-no watercooling unit
-rear fan blowing air into the case
-2 top 120mm enermax fans at 5v
-3slow intake's on the bottom
-slow PSU fan

Processor:
1700+ JIUHB at 2050 mhz

Temps:
Case temp @ 28
CPU temp @ 42

Temp Program:
MBM5

voltages:
12v @ 12.16
5v @ 4.97
vcore @ 1.74

PSU:
Aopen 300W

update soon: 120mm delta's at low voltage, enermax PSU with dual fans and a fanduct

[cowpuppy]

Just go to E bay and do a search for chillers or look in laboritory equipment Neslabs is a good brand mine is a endocal and it has temp controllers (-30 to 100C) along with a heater and 3/8 lines. its size is 18"x16"x16" and has probably a 2 gal bath it runs on 110v I use a consentration heat remover and Dex-Cool with water mix and it has its own pump that I'm sure pumps way more than 120gph

condensation is deffenatly a problem here in MI with humidity reaching 95% in the summer. all my lines are wraped with pipe insolation my blocks are all protected with neopream and my board was preped as if i was gong to run pelts. and I will be soon. I use all plastic fasteners as they sweat less along with plastic water fittings and I use the thick tygon tubing all to fight condensation and then there is the Kleenex tissue shoved in cracks here in there to catch a stray drip

[NickK]

CASE:
Cheiftech Dragon

Processor:
Barton 2500+ @ 200x11 1.775Vcore.
(Did 215x11 @ 2.025Vcore, 2.9Vdimm with SLK900U and lots of fans)

Temps:
Case temp @ 30-32c
CPU temp @ 45c Prime95, 43c 24/7 SETI.

Temp Program:
MBM5 from the Epox 8rda+'s own temp sensor.

Measurement Time:
Prime95 temp - running Prime95 torture for over 2000 test iterations.
SETI temp - running SETI 24/7.

Cooling:
Waterchill CPU+NB blocks, external rad and pump.
2x Papst 80mm 40cfm (one front in, one rear out) connected to Antec's fan speed line.

voltages:
12v @ MBM5 11.73, multimeter says 12.00
5v @ MBM5 4.86, multimeter says 5.01
3.3v @ MBM5 ~3.3
Vcore @ MBM5 ~1.775
Vdd @ 1.82 (Vdd mod)
Vdimm @ 2.77

PSU:
Antec Truepower 550W.

[CSOFT]

CASE:
LianLi PC70

PROCESSOR:

2100+@2.43MHz 221 X 11

MOBO:

Abit NF7-s Rev2 Chipset@1.85V, DDR@2.9v, CPU@2.03V

TEMPS:

Case Temp W/Full Load. 3DMark03 loop 31c
CPU Temp W/Full Load 3DMark03 loop 38c
Water Temps (in the Resavoir) about 30-34
Room temp about 27-31

MEASUREMENT TIME:

2 Hours - GTA3

VOLTAGES: (Winbond Software / Multimeter)

12v @ 12.05 / 12.15
5v @ 5.05 / 5.10
3.3v @ 3.28-38 / NA - havn't mesured
Vcore @ 2.00-2.02 / NA

PSU:

EG651 Modded