OCZ 3200EL plat rev 2

[Ubermann]

Anyone has this ram and know what max volt i can use ?
And what timings..

[Radelon]

I run mine with 2.9v ( Haven't tried higher and was able to get 2.5-3-3-6 @ 265 1:1 with my 2.8e and P4C800ED combo. The ram is pretty decent stuff, I've even had it up to DDR584 with slacked timings.

[Cohiba]

I can't offer any advice on timmings or voltages, but I am curious what you think of the RAM. I'm trying to decide between the Plat rev2 or some 3700 Gold Rev3 for the DFI nf3 I have coming.

[`schr0et]

My 3200 Plat rev 2.0 1 gig kit will be here on monday or tuesday, I had it RMA'd as a replacement for my 3500EB which wouldn't work with 1T/over 220 HTT on my 939 rig.

From what I hear its special selected Samsung TCCD chips rated for DDR500. I'm expecting atlleast 260 1:1 2.5-3-3-7, these chips probably won't do much more with volts as they would with slacked timings.

[Ubermann]

I can run it 320 1:1 but not very stable.
Its very good ram, but wonder what max volt i can put on it.
Will try 2.9

[Cohiba]

I can run it 320 1:1 but not very stable.
Its very good ram, but wonder what max volt i can put on it.
Will try 2.9

That is a nice OC from its standard rating. Thanks for the info, and I hope you can get it stable and still keep an OC near that 320.

[Dagalidis]

That is a nice OC from its standard rating. Thanks for the info, and I hope you can get it stable and still keep an OC near that 320.

Am I dreaming or NOT ?
320 1:1
Please post timmings / CPU multi and SANDRA MEM Screen Shot ....

[Cohiba]

Am I dreaming or NOT ?
320 1:1
Please post timmings / CPU multi and SANDRA MEM Screen Shot ....

Heh......if he gets it stable at that speed, then I will join you in 'ing everywhere.

[Ubermann]

I have this shot, sitting and playing right now.
Will make one with more info later.
Running bios settings that anandtech use and same ram as him.

[Ubermann]

Some new info.

Got past 5000Meg/sec in Sandra at 320FSB.
And took the board to 340FSB 1:1 for 10-15 secs (Not that i belive it myself yet, has to be something that is wrong!)
This ram is very nice =)

Check pics.

[Razor_cut]

Fantastic Uber. I wish I could turn back the clock and not ordering the 3500EB I'm receiving later this weekend.

Ha det!

[Ubermann]

Managed to run a sandra at 338fsb 1:1
But without 1T it dont make good score.

[Zeus]

Some new info.

Got past 5000Meg/sec in Sandra at 320FSB.
And took the board to 340FSB 1:1 for 10-15 secs (Not that i belive it myself yet, has to be something that is wrong!)
This ram is very nice =)

Check pics.

Wow 5K!!
What did you do to go from 4645 to 5010?
Only thing i see changed is your HTT from 319 to 320.

Did you go from 2t to 1t?

[Mrki]

Jep ... He get from 1T to 2T

greetz

[Ubermann]

1T worked up to 320 so far.
But im still novice at this.
Volt readings are brooken on this board now it seems..but i continue till fans fall off =)

[CrimeDog]

could you do me a favor and post timings and voltages with those fantastic screenies?

[Ubermann]

could you do me a favor and post timings and voltages with those fantastic screenies?

Timings are 3-4-4-10
Volts are:
Chipset 1.6
Ram 1.9
CPU 1.550 + 113%

I think i sell this Clawhammer and get a 3400 newcastle.
Seems more fun to play with.

This was for 338:
CPU VID Control: 1.550 V
CPU VID Special control: 110%
Chipset: 1.60 V
AGP Voltage: 1.50 V
DRAM: 2.9 V

DRAM Freq set: 200 1/01
Command per clock: Disabled
Tcl: 3.0
Trcd: 0.4
Tras: 10
Trp: 0.4
Tref: 4708 cycles
Twcl: 01
DQS Skew control :Increase skew
DQS Skew value: 128
Dram drive strength: Level 4
Max Async latency: 09.0 nano

If i remeber correcly, kinda hard to remember stuff when you boot comp every 5 minute =)

[Goldlocke]

Ubermann, these are awesome results. (Especially for PC3200 RAM )
Too bad you can't test 2x 512MB.

What's your highest clock at CL2 - 2 - 2 - 10, 1T ?
thx!

[bias_hjorth]

looking good.. But correct me if I am wrong but you´re using 7.5 multi in the T1 shots?

[Ubermann]

First 2 pics with half multis.
Before i knew that it use some divider.
The rest is "whole" multis..

Havent played much with 2-2-2 but it got to ~225mhz something.

[Ubermann]

At 2T system is very stable but not good in sandra.

[Ubermann]

310FSB 1:1 X 6 CPC ON

Volt settings:
Cpu 1.550
Cpu spec 113%
Chipset 1.8
AGP 1.6
Dram 3.0

Dram settings:
200 1/01
CPC ON
Cas latency 2.5
Ras to cas 4
Tras 11
Row precharge 3

Refresh period 4708
Write cas Auto
DQS skew Increase
DQS skew 128
Dram level 3
Max Async 10 nano

Doing prime...

[Zeus]

Nice work Uber!

Does the RAM get hot to the touch? (3V )
Is 320 stable enough to run some benches like SuperPi 1M and PiFast?

[Ubermann]

Ram is cold yet.
Dont think 3.0 really is 3.0.
Cant run any Pi test with 320 CPC on, yet =)
310 was ok in prime for 47 minutes, moving on to 315 now.

[Zeus]

Nice man!
Please post a screenie of the highest you achieved with SuperPi 1m.

320 would be da bomb!

Keep us posted, i can't wait to get mine.