athlon64 overclock record. all owners please post

[TMM]

3200+ winnie 0504 (forget the stepping, didn't write it down )

2600mhz prime95 stable @ 1.7v :/

but if i back off to 1.65v i still get 2580mhz prime95 stable, so that seems to be the sweet spot

[PcCI2iminal]

but the WR is now of 543Mhz ,i'm only second :

nice,very nice

FX air cooled



3040mhz

[Sh0r_ty]

im running my 3200 at 2.6 with my A8N-SLI Delux vcore 1.47 My present problem is that i can't get vcore any higher in the bios. I can run 2.5ghz stable with stock vcore.

i got some geil value running ddr460 3-3-3-5 1t can run ddr480 3-3-3-5 1t

[FireDragon]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

[overcrash86]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

0503

[rzonealley]

ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271

3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...

seem like urs is from the same batch as mine
ADA300DIK4BI
CBBID 0503EPJW
1193319A50124

so far stable at 2.43 at 1.64vcore...seems like the newer batch need a lot of juice to reach high clock... wonder why clock gen didnt work well on my setup... have to play with bios for evrythings...

[eva2000]

3500+ Newcastle CAA2C 0505 APMW
MSI K8N Neo2 0444A2 chipset with Corsair Hydrocool 200 cooled cpu
2x 256MB KHX3200K2/512 BH-5
80GB WD 800JB
550W GTR Black PSU 38A/12v rail

stock vcore 1.47 = 11x 250HTT = 2750mhz



max pifast passable

1.6v = 2835mhz
1.65v = 2866mhz

using divider to test cpu max limits




3dmarks ran in same windows session

Gecube 9800Pro Extreme stock speed @398/351









amazing

[Athens[2004]]

just paintstable . :banana4:

0447. 3.0+ msi k8n neo2 with no mods [yet] .

fullbenchable @ 2.85~ 1.75vcore [testing]
fullstable @ 2.7~ defaultvcore
< 2.6ghz @ full stable undervolted
winbootable 200*9 @ 0.9vcore

watercooled.

[TheMeatFrog]

3000+ 0444 MPM 2.7GHz @ 1.6v
Cooled by a thermalcrap heatsink and tornado fan

[fareastgq]

a64 winnie 3000
CBBHD 0449 MPM

far as I know, I have the only and latest CBBHD MPM chip, haven't seen anyone else post the exact same stepping.

suicide oc's, 2.6 at 1.4 volts, 1.7 volts only yielded 2.8, this is on stock cooler air, NOT tested for stability, only sandra benched, will post screenies and edit this when I get water with 24/7 memtest/3dmark stable tests, as max mhz mean little except for benching and bragging rights.

[Sh0r_ty]

hmm well my best stable tested system is 2.6ghz at 1.5vcore. i can get 4ghz on my 3200 in bios il post some pics in a sec

[Sh0r_ty]

i know that its not the best as its only bios but it is with stock cooling as those last pics show. btw they were with a not great digital cammera but those last pics are of my stock fan just to show im using it not liquid or phase change

[Levish]

3500+ Newcastle
250x10 @ 1.56v
166mhz mem 2,2,2,5,1T @ 2.8v

[babyelf]

I have
ADA3500DEP4AW
CBAUC 0420SPMW

currently doing 250x10 = 2.5ghz at 1.6Vcore

here's a screenie
NOTE* in the screen shot prime still show 260x10 which is incorrect because i dropped it since i couldn't get it to prime stable. I changed the OC settings in windows and it didn't change prime's reading.

http://img.photobucket.com/albums/v.../2500stable.jpg

here is my other spec

Thermalright xp-90 with 92mm tornado
Abit AV8
Antec TrueBlue 480W
Crucial Ballistix 3200
Gecube X800XTPE cooled with zalman ZM80D-HP
SoundBlaster Audigy2 ZS
Raptor I x 1
WD Cavier SATA 120GB

[skid]

3500+ Newcastle

ADA3500DEP4AW
CBAUC 0420SPMW
9763414F40037

Does 2400Mhz (240x10) stable @ 1.6v.
Ran a few Benches at 2500Mhz (250x10), but I cannot honestly call that stable.

[recover]

3200+ Winnie w/ stock heatsink and fan.

2450Mhz@ 1.55v (245HTTx10)

We just got done playing Call of Duty and Battlefield 1942 for three hours, with a benchmark here and there just cause they like to be ran. ..if I can game continuously until I decide it's bedtime (which we do nightly) without any problems, I would define that as "stable".

[Alec]

nice stuff. Try lowering the volts to say 1.45Vcore and do a 32m SuperPi. Should give ya better temps and suck less power from ur PSU

[mesyn191]

ADA3500DEP4AW
CBAEC 0427WPMW

3500+@2.7Ghz
DFI Ultra-D 3.10 non p BIOS
2 x 512MB OCZ 3200vx @ 1T 2-2-2-8 245Mhz @ 3.3v
x850xt PCIe @ stock
2 x 36GB Raptor (still get 10DE error so RAID is a no go)
Mad Dog 600w PSU (+3.3@3.4 +5v@4.99 +12v@11.89)
VapochillLS -47C/-33C idle/load

[STONKA]

3200+ 0445 SPAW with Air cooled 100% prime95 Stable by 1.45 Vcore



Or 3000 MHZ 100% prime95 Stable on Mach2 GT , but only 1.53 real Vcore
DFI must be her

[overcrash86]

my personal last test validated

WC Home made

http://valid.x86-secret.com/show_oc.php?id=8691



and the FSB test ,i'll retry with 3,1xx Ghz just for fun

http://valid.x86-secret.com/show_oc.php?id=8681

[shimmishim]

3200+ 0445 SPAW with Air cooled 100% prime95 Stable by 1.45 Vcore



Or 3000 MHZ 100% prime95 Stable on Mach2 GT , but only 1.53 real Vcore
DFI must be her

nice speed but when you run large FFT's or blend test you're not stressing just the cpu... it'd be better to run small fft's...

[STONKA]

small ffts rock also 100% Stable
First i test small ffts than large ffts

[Formann]

Put my "ClawCastle" under the CPU cooler last night. Its a CAA2C 0506BPMW

3200Mhz super-pi 1-4m stable. 1.86v

Max in prime is 3Ghz .. diddn´t have the time to try any higher, but will do so tonight.

[TheMeatFrog]

CBBHD 0444 MPM Winnie

[alexgontijo]

3200+ Venice
CBBLE 0519 DPBW

2.7 GHz (270x10) - 1.55v - 10 hours Primed
2.7 GHz (300x9) - 1.55v - 1 hour only (but should be the same)

31s on SuperPI.

I'll try 2.8 soon...

Regards,

AleX