w00t! 475FSB on air! E6300... 3h orthos stable

**an0nym0us** · 10-07-2006, 08:25 PM

after wrestling with my memory for the past week or so i finally decided that loosening the timings was the way to go. although i didn't really want to, i decided to loosen the memory up to 5-5-5-15 as my memory was holding me from going past 430FSB. my setup is as follows:

E6300 L626 Retail 475x7 1.4 vCore in bios
Gigabyte DS3 F6a
G.Skill 2x1gb 2GBPK PC6400 4-4-4-12 @ 5-5-5-15, DDR 950
XFX 7600GT 256mb
74gb Raptor
Scythe Ninja Plus
Thermalright HR-05 NB heatsink

superpi 1m results, 17.7sec:

almost 3 hours of orthos so far:
<a href="http://xs.to/xs.php?h=xs307&d=06400&f=3325.jpg" target="_blank"><img src="http://xs307.xs.to/xs307/06400/3325.jpg.xs.jpg" title="Free image hosting powered by xs.to"></a>

i'll have screenshots of sisoft sandra benchmarks when i'm done testing stability. what do you guys think about my temps?

**Jen** · 10-07-2006, 08:40 PM

temps look good to me

hugs

Jen

**Absolute_0** · 10-07-2006, 08:41 PM

Pretty decent, in fact damn good for what you paid. 200$ CPU and 150$ mobo, and you've got more performance than an AMD64 dc at 3.5 Ghz. This is something that was only in dreams not too many months ago.

**an0nym0us** · 10-07-2006, 08:51 PM

thx on the feedback, i need to get a thermometer to measure room temp. lol i have all the vents blocked in my apt. except for the ones to my room.

**Lestat** · 10-07-2006, 08:59 PM

is there any reason why your still using the F6 beta instead of the F6 retail ?

**an0nym0us** · 10-07-2006, 09:13 PM

Originally Posted by Lestat

is there any reason why your still using the F6 beta instead of the F6 retail ?

this is the bios that's been working for me and i don't want to jinx it. lol. i guess i'm a little superstitious.

**[cTx]Philosophy** · 10-07-2006, 09:15 PM

Nice results..
My super pi times are a bit faster @ lower clocks, im taking it this is because of your 5-5-5-15 timings..

Is this your max speed, or are you still tweaking?

Push her further I wanna see 3.5

**an0nym0us** · 10-07-2006, 10:24 PM

Originally Posted by Philosophy

Nice results..
My super pi times are a bit faster @ lower clocks, im taking it this is because of your 5-5-5-15 timings..

Is this your max speed, or are you still tweaking?

Push her further I wanna see 3.5

i'm still tweaking i'll be able to tell you by tomorrow if i can hit 500

**Achill3uS** · 10-08-2006, 02:43 AM

nice result

gona try: link

**187(V)URD@** · 10-08-2006, 04:32 AM

My E6300 did 500*7 at ~1.45Vcore on stock cooler with P5B vanille, orthos stable.
No mods or whatever, too bad I sold it after 2 hours playing

Was a better setup then my E6400+P5B dlx combo.

**ANP !!!** · 10-08-2006, 04:37 AM

Nice Results n Efforts.

**~~Marvin_The_Martian~~** · 10-08-2006, 05:04 AM

Originally Posted by Philosophy

Nice results..
My super pi times are a bit faster @ lower clocks, im taking it this is because of your 5-5-5-15 timings..

Is this your max speed, or are you still tweaking?

Push her further I wanna see 3.5

Could you show us

@an0nym0us, good effort! Allot off spi tweaking to do though... nasty theme's eating away those ms...

I got 16.205s with E6300 and ds3, also with kind off crappy ram ( eg no d9's but elphidia I think... ).

Link

When I boot at 500x7 and use clockgen to go higher this is the max I can get... 511x7

That's about where my ram begins to crumble. Think the cpu has allot left since it never seen more then 1.35 yet

**jbizzler** · 10-08-2006, 05:12 AM

I'm stuck at 430 as well, even though my temps are well capable of more. I have a Corsair TWIN2X2048-6400, rated at 5-5-5-12. What should I raise them to in order to get passed my 430FSB? Voltage as well please.

**~~Marvin_The_Martian~~** · 10-08-2006, 05:27 AM

Are you sure you're limited by ram? If you drop a divider it's still not stable/booting? Try increasing vdim alitle.

Maybe it's not ram/cpu limit but board fsb limit? Can you run higher fsb with lower multi's?

Also afaik it it's a hard wall you can't beat, try running 400x7 it might be quicker then 430x7 because off the straps.

**ssabripo** · 10-08-2006, 08:40 AM

nice results!

I got mine to 3.4 stable as well, running 485fsb. Timings where left at 4-4-4-12-4-42. I dont want to run it that high 24/7, and the temps where a little too much for my likes (55C idle), so I brought it down to this:

Vcore = 1.3875
Vdimm = 2.25 @ 4-4-4-8-4-35

fsb = 450 for 3.16ghz, super stable....Idle 50C/ load 58C

**an0nym0us** · 10-08-2006, 11:00 AM

Originally Posted by ssabripo

nice results!

I got mine to 3.4 stable as well, running 485fsb. Timings where left at 4-4-4-12-4-42. I dont want to run it that high 24/7, and the temps where a little too much for my likes (55C idle), so I brought it down to this:

Vcore = 1.3875
Vdimm = 2.25 @ 4-4-4-8-4-35

fsb = 450 for 3.16ghz, super stable....Idle 50C/ load 58C

what cooling are you running?

**an0nym0us** · 10-08-2006, 12:32 PM

here are some sandra benches...
arithmetic, dhrystone 30731 MIPS, whetstone 21085 MFLOPS:

multimedia, integer 182733 it/s, floating-point 98674 it/s:

bandwidth, 7614 MB/s, 7640 MB/s

**Death^Dread** · 10-08-2006, 12:45 PM

what voltages are you running?

**an0nym0us** · 10-08-2006, 12:53 PM

vCore 1.4V
vDDR +.3V
vMCH +.3V
vPCIe +.1V
vFSB +.3V

**ssabripo** · 10-08-2006, 01:19 PM

Originally Posted by an0nym0us

what cooling are you running?

its in my sig!!

Scythe Infinity Heatsink + fan

**ssabripo** · 10-08-2006, 05:54 PM

Holy cow I'm an idiot!!!!!!!

all this freaking time I was wondering why my 3Dmark05 scores were a little low compared to the rest of you, and it was because I had THE WRONG slot installed on my X1900XT. I had it at 4x instead of 16x because I had installed it in the universal PCIe slot, and not the real primary 16x slot...LOL!

check it out now!!! Super stable, good temps, down from 3.38ghz (because temps were a little high for my liking):

ps- does anyone see anything wrong with this picture??

**Hehe** · 10-09-2006, 08:48 AM

Graphic card in black slot (instead of blue)

**ssabripo** · 10-09-2006, 09:17 AM

Originally Posted by Hehe

Graphic card in black slot (instead of blue)

yup....hehe, you live and learn!

**OV3RCLOCK3R** · 10-09-2006, 12:37 PM

Originally Posted by ssabripo

Holy cow I'm an idiot!!!!!!!

all this freaking time I was wondering why my 3Dmark05 scores were a little low compared to the rest of you, and it was because I had THE WRONG slot installed on my X1900XT. I had it at 4x instead of 16x because I had installed it in the universal PCIe slot, and not the real primary 16x slot...LOL!

check it out now!!! Super stable, good temps, down from 3.38ghz (because temps were a little high for my liking):

[IMG]http://upshizzle.com/gallery/albums/uploaded/10.06/stable_current_final_OC_fixed_PCIe_x16.jpg[IMG]

ps- does anyone see anything wrong with this picture??
[IMG]http://upshizzle.com/gallery/albums/uploaded/10.06/e6300%20005.jpg[IMG]

Cabling aswell

**ssabripo** · 10-09-2006, 05:02 PM

another run with ATI set to 682/783 on the X1900XT (using the CCC overdrive, nothing special).

13K is right around the corner...I'm sure if I increase the CPU OC to 3.25ghz or so I'll get there easy.

Thread: w00t! 475FSB on air! E6300... 3h orthos stable

Thread Tools

Search Thread

Rate This Thread

Display

w00t! 475FSB on air! E6300... 3h orthos stable

Bookmarks

Bookmarks

Posting Permissions