Thermaltake Extreme Spirit II chipset cooler on Abit AW8D 975x motherboard

[eva2000]

Funny with all this conroe/DDR2 talk, had an itch to see if i can figure out the issues with AW8D and fsb limits.

Folks say NB chipset cooling for LGA775 is the key to high fsb, so decided to try a Thermaltake Extreme Spirit II chipset cooler on the NB chipset. Bought 2 of these coolers from i4memory.com sponsor Mittoni.com.au http://www.mittoni.com.au/extreme-sp...er-p-2318.html

Fits just right for video card, and Swiftech G4 Storm waterblock and even has allowance for Maze4 GPU waterblocks' mounting bolts which extend out by ~25mm from the back of the video card. The orientation pictured below will allow the Maze4 GPU waterblocks' bolts to extend out without touching the chipset cooler

Full pics posted at http://i4memory.com/reviewimages/mot...SpiritII/html/

Preview pics:

The Thermaltake Extreme Spirit II cooler on top of existing Abit AW8D heatpipe passive heatsink to show how it would look in it's place. Also seems the stock heatpipe heatsink's TIM doesn't even properly contact the chipset core or is it meant to be that way ?

Please note, this Abit AW8D is an early engineering sample so might not reflect the final retail product.



The larger heatsink connected to the heatpipe located near IO connectors is covering some mosfets. So removing the passive heatpipe, you would need to find another heatsink to cover these. Luckily, I found just the right heatsink off my old Asus P4G8X chipset heatsink measuring 42mm x 42mm. Even luckier is the fact I have double sided TIM adhesive tape which measures nearly the same size too!





Thermaltake Extreme Spirit II chipset cooler even comes with a circular foam piece for smaller chipset cores to prevent crushing the core! Here's it fully installed on Abit AW8D.



Haven't booted the system up yet so will find out if it helps higher FSB as well as lower temps

[FunkyRider]

OMFG, guess what, this cooler should be able to handle a stock speed Conroe! lol

[Plaicd]

1. I thought the AW8D did not support conroe but the AW9D will?
2. The AW8D has been for sale retail for a week or two why use a es version?

[neoplan]

eva,what this function?thankyou

[eva2000]

yeah AW8D doesn't support conroe only AW9D does... mines ES sample board and it came with that wire on it.. not sure what it is to be honest

only using AW8D has it's provided for me and well AW9D ain't out yet heh

hard to justify buying a AW8D retail right now when conroe supported boards are coming soon.. using this as a test to see if NB cooling helps

[TEDY]

does this cooler fit on DFI ULTRA-D ?

[neoplan]

i have retail AW8D but seem's like different,so that mod @your ES AW8D mobo for support Conroe?thanks.

[eva2000]

does this cooler fit on DFI ULTRA-D ?

probably but haven't tried it...

as to the mod/wire not sure if that is for conroe.. as i got this ES month or so back so probably not

[neoplan]

thankyou eva2000.i'm wait till conroe launch and arrive @ Indonesia

[eva2000]

Well booted her up and so far some improvement not sure if it's to do with NB cooling but my OCZ PC5400 Platinum XTC 3-3-3-12 DDR2 ram couldn't do cas 3 before wouldn't boot pc... now with chipset cooler installed running memtest with 3-3-3-12 as rated!

Bios temps look cool at 14x200HTT stock for 920D but have to wait to get into windows before i can compare as i really can't remember what the bios temps were before heh.

Bios temps & fan speed




Running system pictures below


These below dual stressprime and dual 32M were temps in windows WITH stock heatpipe heatsink with the pictured 60x25mm 4.9W fan on top of the passive heatpipe heatsink heh

@4506mhz








Will redo windows results with the Thermaltake Extreme Spirit II chipset cooler soon

[SMa]

Cooler looks good.
But you should also try the Thermalright HR-05, I love it with a 70mm fan.

[eva2000]

Cooler looks good.
But you should also try the Thermalright HR-05, I love it with a 70mm fan.

yeah no stock of Thermalright HR05 in OZ till early July heh

[JoeBar]

Nice cooler eva!
What about its noise?

One off topic question what audio chipset does AW8D has? Have u found any reviews on the net?

[Fr3ak]

Nice mod, but I guess the little fan on it is quite noisy, isn't it?

[eva2000]

actually chipset fan is pretty quiet 19dba

tech spec http://www.abit-usa.com/products/mb/...es=1&model=313

AW8D sound =


Audio
- ABIT AudioMAX™ HD 7.1 CH
- Supports auto jack sensing and optical S/PDIF In/Out
- Dolby Master Studio Certificated

[sora3]

eva, does the board work with Conroe later on? Just interested...

PS: BTW, haven't heard from you for a long time in the Atomic froums. What ahppened there?

[eva2000]

nah AW8D won't work with conroe, need AW9D for that

Atomic forum's software just too hard or pathethic to use.. Atomic should change to vBulletin.com forum software

Looks like either uGuru software temps are not accurate (idle to load only system temp changed from 31C to 32C) or there wasn't much gain in lower system temps but i did gain being able to properly boot with CAS 3 instead of CAS 4 with the OCZ DDR2 memory.

No gain in max oc, probably either Abit board limited or differences in cpu waterblock mounting contact this time around

with Thermaltake Extreme Spirit II chipset cooler and MCH/PCI-E voltages at 1.7v compared to stock heatpipe with 1.65v volts.

idle:


load:


Will try this again with an Asus 975x LGA775 DDR2 board later to properly see how it goes.

[sora3]

Ah, k. THanks for the headsup dude

[JoeBar]

actually chipset fan is pretty quiet 19dba

tech spec http://www.abit-usa.com/products/mb/...es=1&model=313

AW8D sound =


Audio
- ABIT AudioMAX™ HD 7.1 CH
- Supports auto jack sensing and optical S/PDIF In/Out
- Dolby Master Studio Certificated

Do u know exactly what chipset it is? I know these specs from abit's site.

[TEDY]

it's 25$ here....wonder if it works on DFI NF4 ULTRA-D

[eva2000]

try it and find out hehe

[pcmoddingmy]

eva2000, actually the Abit AW8 series doesn't report NB temps (confirmed by Abit). The system temp that you see in BIOS/uGuru is actually case/mobo temp. You'll need to stick a temp probe near the NB to get the readings. Hope it helps...

[Mykou]

Does anybody know how it fit on asus P5W Dh ?

[eva2000]

probably fit but remember if the larger heatsink near the IO connectors covers and cools something underneath, you'd need another heatsink too... i was lucky my old Asus P4G8X nb heatsink fits there heh

eva2000, actually the Abit AW8 series doesn't report NB temps (confirmed by Abit). The system temp that you see in BIOS/uGuru is actually case/mobo temp. You'll need to stick a temp probe near the NB to get the readings. Hope it helps...

hmmm that would explain why temps never budged more than 1C LOL

[Pjoeloe]

I`m curious how the Thermaltake Extreme Spirit II chipset cooler will compare to this baby, the Coolermaster Blue Ice II
http://www.bytesatwork.be/shop/produ...roductid=20747

and the newest zalman :