Bought it 2day, ran Super Pi 32M @2.6Ghz@1.6V, gonna install 1.36b bios coze I ve got 1.2 there ;D
Gonna write laterz.
Bought it 2day, ran Super Pi 32M @2.6Ghz@1.6V, gonna install 1.36b bios coze I ve got 1.2 there ;D
Gonna write laterz.
I had the same chip was terrible OC'er, max was 2.53 Ghz prime stable. - SORRY was week 44, my bad.
Last edited by dnottis; 01-31-2005 at 01:27 PM.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
sh*t forgot 2 check it but I think it's not cbbgd, dont realy remember. Runnin 32M 2.6Ghz@1.55V now, gonna try 2.6Ghz@1.5V.Originally Posted by boblemagnifique
Do ya think 1.2 bios can hold me back in oc?
Is there any difference between cbbfg & cbbgd? If yes what?
Last edited by $0m#0n#; 01-31-2005 at 01:24 PM.
the cbbgd are rare but one it good being, best the cbbfd are the 0433/0439/0440/0441 my opinion
i had also an 3200+ 444xpew, really bad ocer, max,. rpiemstable 2,55ghz @1,5v, superpistable @2,72ghz, max screenshotstable 2,868ghz need a new one
No Overlocking Today
How do you guys get nice pics of the chips. I could never read the IHS when I'd try and take a picture, so I gave up. I'm still yet to o/c, but according to you guys it won't go very far (I've got 0444 XPEW too).
I ve got a problem, I ve got a 1.2 bios on the mobo, when I am trying 2 flash it (tried 1.3, 1.36b, 1.36moded, 1.4) while flashing it says me Disk full or file error.
2 cardnut99668: My CPU is not so bad I think it's 32M stable @2.6Ghz@1.55V (maybe 1.5V should try didnt have a lot of time, now trying max @1.4V)
What method are you using to try and flash?
Best way I've found (and how I flash EVERYTHING now) is a caldera dos driver free boot disk, with the relevent flash program (eg,AWFLASH) :
http://www.bootdisk.com/
Second one down, 'Driver Free Disk For Bios Flashing'.
Could be a funny floppy drive/disk tho.
Good luck with the chip!
E2180
MSI P35 Neo2 FR
Geil Black Dragon 2x1GB
EVGA 7900GTX
Toughpower 750W
Viewsonic VP191b
Macro mode!Originally Posted by cardnut99668
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
any chip that says "pew" probably is the one that stinks.
Biostar A780 mATX
AMD Phenom II x2 (Unlocked to x4) Stock Clock/Heatsink
ATI X850XTPE Stock
OCZ 2x2GB DDR2-800
Seagate 320GB 16MB Cache Sata 3.0
heatware: skip86
Originally Posted by Skip
hahah my sentiments exactly
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
so 2.5Ghz@1.4V looks stable, run 32M 3 times (dont like Prime ), now I am running Prime
Yesterday I ran Prime 2.55Ghz@1.38V & after like 30min my PC rebooted is it coze of not enough volts?
Last edited by $0m#0n#; 02-01-2005 at 11:27 PM. Reason: added pic
So I am stable @2.6Ghz@1.47-1.49V, now I am trying something higher. I was trying 2.7Ghz but it aint stable @ any volts , I can boot in windows no problem but when I stress it it just reboots. Also I can un my ram @250Mhz 1:1 3-4-4-8 T2 but when I run a divider it's not stable over about 230Mhz
E5200
Asus P5Q-VM
A-DATA 2x2GB
Zotac 8800GT
500W Seasonic
Originally Posted by trakslacker
# 3200+ winnie 0440 XPEW L40234 #
dont get what some of these mean.. plus the "cbbfd cbbgd"
thing
excuse me for being slow or soomit
Bookmarks