Can you see it is a A3 chips? Taken by mobile phone....
Can you see it is a A3 chips? Taken by mobile phone....
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
Barely visible but yes, thank you. CPUZ motherboard tab would show it also.Originally Posted by TinTin
Well gotta tell ya, the absolute minimum I'd task with a serious system based on this motherboard series is this PSU...
Fortron 500Watt ATX2.0 24pin
Just my $.02
GA-MA790GP-D4SH, 965BE, 3.8Ghz
Ultra120E, 4x2G Gskill 1066
2x 150G VRaptor raid, WD640AALS
8800GT 735/940/1685, LG-BluRay
Do you know if the Gigabyte GA-K8NXP-SLI supports 2.0GTs?Originally Posted by thebluesgnr
All I can find on thier site is: Processor interface via 2000MT/s HyperTransport bus
Is that the same thing?
Thanks!
SLI version must be A3 chips, they support 1GHz Hypertransport (i.e. 2GHz bi-direction)Originally Posted by GRAFiZ
The Gigabyte GA-K8NF-9 nForce4 4X chipset
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
Aha!Originally Posted by TinTin
Thanks friend.
You'll have to excuse my ignorance, I'm used to Intel systems.
I just hate Gigabyte selling those 4X chips (A2) instead of REAL NF4 ultra chipsOriginally Posted by GRAFiZ
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
Well guys I have a new bios, about to test but indications show a huge improvement on the memory
OPP mail me and i will return mail it to you.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
The epox is nforce3 and the dfi is nforce4....that's the difference. Nf3 gives more bandwith.Originally Posted by bigtoe
System:
Opteron 165+ @ 3140mhz @1.5V aircooled
DFI NF4 Ultra-D
4X 512mb Speedpremium PC3500 new BH5
MSI 7900GTO 512MB @ GTX
2x WD 80GB raid 0 + 2x 300GB Maxtor
Channel Well Tech 550W
Big Toe or Opp.
whats under the chipset fan, thermal pad, or paste?
like always, looks like DFI just out did everyone again.
How are the actual voltages compaired to the bios settings?
As everyone says, this board is really tempting for all of us that dont like modding our boards due to the extreme voltage options...
How are the voltages then?
As posted earlier 3.9vdimm results in BSOD. Any other troubles related to the voltages?
Deep vcore drops during load? VTT tracking? Vdimm 3.0->4-0v?
It really seems as we are entering a great chipset era. Ati is gonna spice up the scene!
Now, give us a DFI manufatured board featuring a killer chipset with Dothan support! Wuuuuhaaaaaa!!!
that is good news, then I can use my 20-24pin converter on the DFI NF4 board.Originally Posted by TinTin
tintin did you try with a 20-24pin converter?
Not so my friend...a new bios comes to the rescueOriginally Posted by NoStra
Now Angry Games over at DFI street has some later OCZ TCCD thats doing 310+fsb easy, mine does 303 or so.
I will post settings as i load A64 tweaker etc.
Last edited by Tony; 06-20-2008 at 01:45 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
What has changed to give this performace boost and has it changed the max overclock you get with your RAM?
Dave
A64 @2720 w/ RBX, DFI NF4 Ultra, Radeon X800XL w/ Maze 4, Antec NeoPower 480, 1GB Geil PC4000, IIyama 19" monitor and maxtor diamondmax 80 + 30GB
Here is what settings I was using.
Last edited by Tony; 06-20-2008 at 01:45 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
A whole new bios, bank interleave is inc now also.Originally Posted by Feiticeira
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
To see the difference i ran a quick unbuffered. The old is at 310fsb the new is at 303...seems I may be able to squeeze a little more yet
Anyway....here is the old.
And now the new.
Nice gains here
Last edited by Tony; 06-20-2008 at 01:45 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
nice to see new bios improvements
when you say newer TCCD that you and Angrygames have, which model ?
---
Wow...nice imporvement. DFI seems to making all the right adjustments to go along with the best in class feature set they already have. This DFI mobo will definitely be in my future. Thanks for all the great info
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
Angry has 4200EL Plat which came later than the build i have here, which means he has much later week codes.Originally Posted by eva2000
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
i see..
btw, whole of Australia ran out of OCZ PC3200 Plat rev2, someone I know rang 30 retailers here and no stock and best ETA is 3 weeks heh.. hurry and ship our Aussie disties some more stock
---
I will forward the info m8...thanksOriginally Posted by eva2000
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
hows the OCZ EB doing with this new BIOS?
and at what voltage do you run them at, tony?
Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
4GB OCZ PC2-9200 Reapers
150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
BFG 8800GTS OC at 675/2100
Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
OCZ GameXStream 850W
MountainMods U2-UFO 18" Cube Case
DELL 2405FPW 24" Widescreen LCD
RME-Audio Fireface 800 based audio production
awesome news on the bank interleave. Thanks for that.Originally Posted by bigtoe
Darn some serious gains there Tony, thank you for sharing.
Me think 4200 Platinum is the way I will go, cooler and no need to generate heat with the vdimm bridge at 5 volts.
reseller is going to be pissed 3rd time I change my memory choice, LOL....oh well good outcome of that now he' got the entire line of OCZ modules in stock...hehehehehe
Bookmarks