MSI Neo2 + winchester 3200+ Gskill pc4400 problems.. ugh!

[CrunchTime]

Well,

Since ive had my motherboard the MSI Neo 2, i cannot get my gskill ram stable at the rated speeds w/ my winchester 3200+

The chip itself is stable at 2.62ghz @ 1.55V but when the ram is put @ 1T at 2.5-3-3-7 or even 2.5-4-4-8 , i get crashes after a few hours of 3D or Prime blend testing etc.

When i put the ram @ 2T, these problems go away so its clearly the memory. Also the chip has passed prime95 for 24hrs at 2.62 ghz

I have the 1.41 bios, and I really cannot find the cure to this problem! My NB chip date is 0440A2 Taiwan.

I believe ive tried everything, really not sure what else to do

[NiCKE^]

Volt at vdimm?

[CrunchTime]

2.65... tried most/all of the options

[jjcom]

only give 2.65??? Give it more volts. Maybe the CPU is messed up. Do you have other RAM you can try out? The on die mem controller may not like the RAM..

jjcom

[Zanr Zij]

My NB chip date is 0440A2 Taiwan too, but I use 1.37mod. That's the best BIOS 4 my Sys...

I can run stable every day winny 3200+@ 2.6GHz ( 260x10 ) with 1.45v Vcore, Gskill PC4400@ 260 timing 2.5-3-3-5, 1T... I need a fan 4 Rams ( like OTES 4 rams of ABIT )

What's ur setting detail ?

My sys :

MSI K8N Neo2 Pla ( Board date 0440), winny 3200+ ( 0441 ), G.Skill PC4400 ( 431 )...

BIOS Setting :

Dram config : 200, 1T, 2.5-3-3-5
NV/ATI : Dis
HTT : x4
Multi : x10
Vcore : 1.3v with over 10%
Vram : 2.7v

My sys can reach max at 2.93GHz... on Air ( Hyper 6 )


I thinks u should try 1.37mod BIOS and add a fan 4 RAMS

[Unrealcpu]

MSI boards are crap

[Sentential]

MSI boards are crap

Yea I agree, but its all we have for the moment :-/

[mad mikee]

MSI boards are crap

You haven't tried the k8ns 939 ultra yet have you

Back on the topic @ hand - what multi x FSB combos are you trying?

[CrunchTime]

thanks for the tips, ill see what i can do