so 808 is better ?
PQI Turbo Memory 4000 (PQI4000-1024DBL) --> Brainpower 815
TCCD ?
so 808 is better ?
PQI Turbo Memory 4000 (PQI4000-1024DBL) --> Brainpower 815
TCCD ?
Last edited by TEDY; 11-12-2004 at 02:36 PM.
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
just some bench without any tune and cpu's stock cooling.
A-data Vitesta DDR600 2.85V
I believe it can go futher with some more aggresive timings with a Vdimm mod or ddr booster
Hello everyone. I think I might have caused some confussion. Here is a link to the ram I bought from Newegg.
http://www.newegg.com/app/ViewProduc...141-148&depa=1
This is the DPU I think or did I missunderstand? If I did missunderstand then please explain to me the difference. What ever it is the pcb is 808.
wildabeast, "DPU" is Platinum - it looks like you understood just fine. It just goes against what Apoptosis was saying on the last page. But I am sure it's entirely possible PQI switched which PCBs they were using. That would probably mean they also switched their PC4000 line as well.
Last edited by WiCKeD; 11-12-2004 at 06:19 PM.
Current system:
Case: Modded Watercooled Jpac
CPU: Intel Q6600 @ 3.5GHz [1.47v] - OCCT stable
Mobo: DFI LanParty Jr T2RS @ 432fsb [1.37v]
RAM: Crucial Ballistix Tracer 4*1GB DDR2 @ DDR1095 (5-4-5-15) [2.2v]
HD: WD 300GB Velociraptor / WD 640GB Caviar
GPU: HD 4850 Crossfire @ (700 | 2200)
PSU: OCZ ModXstream 780w
Ordering my Patriot 2x512 over the weekend! I post results on a Kt600 as far as highest Low latency FSB. Will report higher latency OC results with ABIT mobo and 3200+ winnie next week or so.
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
Just testing
This has nothing to do with the fact that I can't get TCCD here
24 core Xeon:
2x Intel Xeon Q3QS 'ES' @ 4.1GHz (folding@3.8GHz) - (flakey) EVGA SR-2 - 2x Antec Kühler 620 - 6x 4GB Corsair Vengeance 1600MHz CL8 - MSI GTX580 Twin Frozr II/OC - Thermalright Shaman - 2x Intel X25-M 80GB RAID0 - Silverstone Strider 1200W Gold - Lian Li PC-P80
well i just got back home to pick up my pdp xbl 2x512mb that i paid $221 for.
after an hr of testng. the best i can get out of these are 283 in dual channel, which is quite impressive than my last pack which only scaled as high as 265. I use to think it was my memory controller holding me back, but i guess not. I didn't mix and match the memory sticks. I just took the ones from newegg and just popped them in and went away testing.
on all my pdp sticks that i've encountered, which is 5x512mb...they're all brainpower 815's.
new benching rig
mobo: dfi ultra-d rev. AD0
cpu: x2 3800+ @ 3.30 ghz
cooling: VapoLi SS by jinu117
stepping: LDBHE 0601 TPMW
mem: khx pc3200 1gig bh5's
psu: zippy emac 700watts
gfx: evga 7800gt @ 650/1355
hd: 36gb raptor + seagate 120gb
single 7800gt 3dmark05 WR!
3dmark05 - 10814
wow 283 in DUAL! Cant wait for mine to get here! Alex Have you tried highest LL settings?
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
I can add that the OCZ 3700 EL Platinum uses Brainpower 808 pcb's and they love voltage
Both sticks are prime stable at 300+ and 3.22 vdimm. I was able to do a banzai of th worst one at 307 as you see in the screeny. The other screeny is 2X512 priming just fine on the DFI UT. Fantastic memory i must say.
Last edited by mackanz; 11-13-2004 at 08:55 AM.
the sad thing is i can't run 2-2-2-5 @ 200. freezes in windows.Originally Posted by Jethro
new benching rig
mobo: dfi ultra-d rev. AD0
cpu: x2 3800+ @ 3.30 ghz
cooling: VapoLi SS by jinu117
stepping: LDBHE 0601 TPMW
mem: khx pc3200 1gig bh5's
psu: zippy emac 700watts
gfx: evga 7800gt @ 650/1355
hd: 36gb raptor + seagate 120gb
single 7800gt 3dmark05 WR!
3dmark05 - 10814
Am I right, that the Twinmos Twister Pro has TCCD chips? u guys think they're compatible with my asus a8v deluxe rev 2.0 and winni 3000+?
or should i better keep my 512 corsair xms pc3200 with rev 4.3 and 1.2
Ill have to see what mine do @ 2 2 2 5 with kt600 i hope it even works in the board!. I wont be getting my 939 system for a week or so. I am excited to see whats left in this KV7 before i get rid of it! She's been a fast machine for little $ indeed!
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
excellent Patriot ram breakdown:
http://www.xbitlabs.com/articles/mem...t/patriot.html
@ $221 for a gig for XBL Dual channel you really cant go wrong!
Never noticed the 3200+ on the ram before.
Last edited by Jethro; 11-14-2004 at 08:45 AM.
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
Can or cant?
@ $221 for a gig for XBL Dual channel you really cant go wrong! = can't
meaning you get what you pay for....aka good ram for excellent price
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
take a look at this
users.skynet.be/bk265593/sis.JPG @ 3-4-4-8
With 2.5-3-3-7 its slable @ ddr630 (mem= gskill pc4800)
Has got to be 2T.Originally Posted by L@TrO
2T isn't worth sh*t when it comes to performance.
Show us your max with 1T please.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
I just got my PDP XBL in and did some quick testing. This is the highest HTT I could get with 2-2-2-5 and 2.9v(my boards max).
These results are completely stable, I ran memtest overnight with 0 errors.
Last edited by JDizzle; 11-14-2004 at 01:10 PM.
Intel E6400 @ 3.2GHZ (1.35v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
Originally Posted by jmke
Brainpower PCB right?
Trust me when I say his MSI K8N Neo won't allow him to run 1t much over 260htt.Originally Posted by Zeus
Asus P5W64WSPro/Xeon 3060 SS 9x467/TeamXtreem 667 2GB/Patriot PC28000XBL 1GB/Sapphire X1800XT/w PE bios/OCZ PowerStream 520w/150gb Raptor/CPU cooled by AquaXtreme MP-05 Pro Limited Edition, BI GTX 240/MCPSwiftech655/Masterkleer 7/16IN
He edited it.. the 'cant' was 'can' before...Originally Posted by TEDY
Is that with ALL pdp sticks you've tested because I'm on my 3rd RMA from newegg for the PQI3200-1024DPU sticks and one stick always received errors at 2-2-2-5.Originally Posted by Alex08
nope my other 3 sticks of 512mb don't have a problem running 2-2-2-5.Originally Posted by Catalan
new benching rig
mobo: dfi ultra-d rev. AD0
cpu: x2 3800+ @ 3.30 ghz
cooling: VapoLi SS by jinu117
stepping: LDBHE 0601 TPMW
mem: khx pc3200 1gig bh5's
psu: zippy emac 700watts
gfx: evga 7800gt @ 650/1355
hd: 36gb raptor + seagate 120gb
single 7800gt 3dmark05 WR!
3dmark05 - 10814
Bookmarks