Hmm.. not sure, The0men.. I'm running an OC'd Q9550. I do get lockups in 3D games every once in a while, but never blue screen. There are others in this thread that are running that CPU too.
Hmm.. not sure, The0men.. I'm running an OC'd Q9550. I do get lockups in 3D games every once in a while, but never blue screen. There are others in this thread that are running that CPU too.
Rig:
Asus Striker II Formula 780i
Intel Q6600 Kentsfield
2 x 1gb Crucial Ballistix PC8500
2 x XFX 8800GTX SLI
6 x Western Digital SE16 320gb (RAID-0)
(4tb alternate storage & backup)
Silverstone Olympia OP1200 (1200w single 12v rail)
*** WTB one used XFX 8800GTX (575mhz) ***
Finally got the hang of my s2f paired with an e6750. Don't think I have one of the lucky boards that would reach 475FSB, seems like 460 is the max I was able to push but concerning stability I decided to stay put at 450 despite the sub par memory performance.
Anyhoo...CPUv at 1.472, NB at 1.5(working on bringing this down next), SB 1.6, VTT 1.39, etc.
http://i44.tinypic.com/wjwaxk.jpg
Striker II Formula BIOS 2102
date:5.22.2009
Enhance the stability of certain memory
http://www.asus.com/Product.aspx?P_ID=wOFZuyplXj0vLmAcCode:http://www.asus.com/Product.aspx?P_ID=wOFZuyplXj0vLmAc
Woah, bios updates still coming out, that makes me happy
GPU - GTX 580 SLI
CPU - I7- 3930k @ 4.9Ghz
MB - ASUS Rampage IV Extreme
Ram - G.Skill TridentX 16GB @ 2400
sound - Creative Sound Blaster X-Fi Titanium
PSU - Corsair Professional Series AX1200
HDD -OCZ Agility 3 x4
HDD - Western Digital Caviar Black 1TB x2
OS - Microsoft Windows 7 64-bit
WOW its good to see asus still trying to breath life into the old dog
EVGA X58 Classified
Intel Core i7 980X @ 4ghz
EVGA 590 GTX x2 Quad SLI
Corsair Dominator DDR3 12GB PC3-12800C8
Western Digital 150 GB Velociraptor
Corsair AX1200
Asus Xonar Xense
Custom Watercooling
Lian Li Pc-P80 Armoursuit
Glad to have seen this post !! I wanted to buy the aquacomputer north/southbridge waterblock, but I don't wanna cut my GTX 275 !!!!! Thank you guy for posted it ! Could you post photos of your watercooled Striker ??
Hi, I have a Q6600 G0 lapped on Swiftech GTZ @ 3.825Ghz with 1.52v, but like most people I want more. Which would be the better option a Q9650 E0 (AUD$430) or a
QX9650 C0 (AUD$580-$1000)? The Q9650 would be cheaper and cooler but will the NB be able to do 450MHz. NB is currently 425MHz with 1.56volts. 4GHz is the target.
Was planning on scoring the aquacomputer block as well.. but then Ive been hearing significant drops in pressure with the block so I just opted for an EK NB and SB.. only problem with this is you have to have a single slot card, or use the other PCI-Ex slot.
E6850 running @ 3.96ghz for 2 years.. now degraded to 3.9ghz. Also sold my other GTX260 to pay some bills lol.
Last edited by Thakkerson; 07-08-2009 at 12:07 AM.
Thanks Thakkerson for the tip...
I plan to buy Anfi-Tec waterblock : http://shop.anfi-tec.de/
Northbridge :
Southbridge :
Mosfet :
I think the southbridge allow to have 2 double slot graphic cards. And they have a beautiful CPU WB :
Is someone here bought Anfi-Tec WB for the striker ???
Hello!
I have one question... when i set cpu multi. in bios lets say to 9 and i boot up normaly and than in windows it's like i didnt done anything it's still on 9.5 but in bios it says it is on 9... Any ideas?
Config.:
E8500@ 4GHz WC
Striker II Formula
TeamGroup XtreemDark 2x2GB
8800GT SLi
Anybody?
2102. Thing is that i can't change it to anything else other than stock 9.5! Similar happens when i want to set FSB/DRAM ratio... i must manualy set frequencys if i want 1:1 ratio...
Last edited by Associated; 07-28-2009 at 01:05 AM.
This is really PITA so if anybody has any ideas pleas help...
Check at the Asus website. A new bios is out. 2201
http://support.asus.com/cpusupport/c...Language=en-us
Last edited by pulsar21; 09-23-2009 at 12:01 AM.
I'ld appreciate some help to get my rig (QX9650) stable at 4.3 Ghz or more when possible.
My settings are:
Bios 2201
Vcore: 1.57250 in bios (1.47 cpu.-z)
pll: 1.52
vtt: 1.28
mem: 2.10
nb: 1.50
sb: 1.60
ht: 1.20
bridge: 1.20
the other settings like fsb+mem and timing are all on auto. Multiplier is 13.
temperature are in idle: 39, 46, 43, 40 (core temp) system is complete watercooled.
I can boot in windows and the system seem to be stable but games like ghost recon crash after some minutes or the network connenction got lost and I've to disable and enable the network adapter to reconnect.
What should I do? raise the vcore a notch more or what?
thanks
Last edited by pulsar21; 09-23-2009 at 12:00 AM.
Asus Strike II Formula Bios 2201
QX9650 4.33 GHz
4x2 GB Corsair Dominator 8500 1066 MHz
eVGA 285 GTX SSC 2GB
Thermaltake PSU 700w
Windows7 x64
I think this thread is dead.
Asus Strike II Formula Bios 2201
QX9650 4.33 GHz
4x2 GB Corsair Dominator 8500 1066 MHz
eVGA 285 GTX SSC 2GB
Thermaltake PSU 700w
Windows7 x64
yap!!!!this thread is dead they don´t care if your board fry or dead
hope some one there can help you
all I see is i7 i5 i3 boards
i7 chips
they can buy it and play it
i´ll wait 1 year to buy my new pc
but now I´m on my striker II formula an E8400 to do my needs
all watercooled @4.7 idle 30 Cº full 48 Cº ambient 26 Cº
great oc you have. my qx9650 is at @4 idle 38 C° and 58 C° at full with ambient at 26 C° also watercooled.
Asus Strike II Formula Bios 2201
QX9650 4.33 GHz
4x2 GB Corsair Dominator 8500 1066 MHz
eVGA 285 GTX SSC 2GB
Thermaltake PSU 700w
Windows7 x64
Anyone run into a problem where when you shut down or restart, the computer goes through the normal shutdown/restart sequence, but right when it should powerdown/reset it just stays there.. powered on, but unresponsive? I always have to press and hold the power button to force it off... even on simple reboots. I updated the BIOS a half year ago, yet it just started happening recently. I wonder if it's related to the PSU or the freaky UPS.
Rig:
Asus Striker II Formula 780i
Intel Q6600 Kentsfield
2 x 1gb Crucial Ballistix PC8500
2 x XFX 8800GTX SLI
6 x Western Digital SE16 320gb (RAID-0)
(4tb alternate storage & backup)
Silverstone Olympia OP1200 (1200w single 12v rail)
*** WTB one used XFX 8800GTX (575mhz) ***
I need settings for my Q9550 Striker II Formula.
I run on "CPU LEVEL UP" crazy settings, which gives me 3.49Ghz
I would like to take it further, any surgestions?
I tried some manual settings, but seems like i get it wrong.
Thanks.
Hi guys, does anyone else have this board?
My Asus Striker II Formula is not working. LCD poster display shows "code init".
NF200 chip is cold, it not warming. I tried reflow with hot air gun, but it didn't help.
What to do next? Reflow north bridge?
Bookmarks