MUSHKIN PC4000 2gB SMOOKKIINNNNN!!

[Joker80]

http://img390.imageshack.us/my.php?image=img01166lo.jpg

[Bar81]

Got to say these sticks are top notch. Finally got my PC back yesterday after 4 months without. Currently at 260mhz at CAS2.5. We'll see if they can do more but having this 3D stable at this speed is more than I expected with all the stories. 270mhz at CAS2.5/3 would be icing on the cake. We'll see tonight.

[Bootsy]

man those are some sweet timings! i might just jump on a pair.

[Bar81]

Well tried 270 last night even at 3-4-4-8 and it was a no go but I didn't expect it. Still pretty sweet that they'll do 260mhz+ at CAS 2.5. I'm still playing around with my CPU as I'm at 2.7Ghz right now (300x9). We'll see if it does any more. Either way I'll probably play around with the RAM some more to see how high in the 260s it will go.

[Bar81]

Well tried 270 last night even at 3-4-4-8 and it was a no go but I didn't expect it. Still pretty sweet that they'll do 260mhz+ at CAS 2.5. I'm still playing around with my CPU as I'm at 2.7Ghz right now (300x9). We'll see if it does any more. Either way I'll probably play around with the RAM some more to see how high in the 260s it will go.

[godsa]

I must the best overclocker in the dam world...or not..because im some what lucky? Or is it that I try to get the best parts for my whole system and every detail is important?

This RAM ROCKS!!! u hear what i'm saying!! It ROCKS!! The timings could be a little bit better BUT I have been running 285 for like a week now dual channel...no problems..I didn't overclock it in one day..little today..then play more tommorow if there were issues but straight from the box I did 285

060305

Cya

Ps all the memory timing i got from this website I had to combine a few to get there..but just looked at the 290's Chronics was helpful and Andys

[@_dud]

There seem to be quite a few new 2x1gb sticks coming out creating alot of hype, but does anyone know when they are coming out?

[charlie]

wow!! nearly 500 posts in this thread... this is some LEGENDARY memory.

[cadaveca]

and like all other legends, mine are starting to die.

[Duonger]

how is it dying?? these are inf ce5 chips.

tom

[NinjaWreck]

This RAM ROCKS!!! u hear what i'm saying!! It ROCKS!! The timings could be a little bit better BUT I have been running 285 for like a week now dual channel...no problems..I didn't overclock it in one day..little today..then play more tommorow if there were issues but straight from the box I did 285

060305

Cya

Ps all the memory timing i got from this website I had to combine a few to get there..but just looked at the 290's Chronics was helpful and Andys

What timings?

[FireDragon]

Well i got these sticks not long ago to replace my BH-5 and i got NANYA ic's on them i was worried at first i could get over 255 3d stable after messing with the timmings for about 3 days i am currently sitting at 280 1:1 3d and prime stable, these sticks r insane and at 255 where outperforming my BH-5 at 255 lol!! the 704-BT bios is the best i have found

Dragon

[biohead]

Well i got these sticks not long ago to replace my BH-5 and i got NANYA ic's on them i was worried at first i could get over 255 3d stable after messing with the timmings for about 3 days i am currently sitting at 280 1:1 3d and prime stable, these sticks r insane and at 255 where outperforming my BH-5 at 255 lol!! the 704-BT bios is the best i have found

Dragon

What kind of timings? I have them as well, review samples. I can't budge >255 3-3-2-8 but I haven't fiddled with subtimings much. Running DFI RD580.

[FireDragon]

Well atm i am in the middle of moving so i dont have my computer i will ina few days but i can tell you that the highest dram drive str and ddds of 3 was the best, my opty seems to like low trefs, 3.9 us 2064, i tried messing with tWR becuase i had read that was a likely culprit of 3d instability, but that dosnt seem to change anything nor did tRP going to 3, i can get into games at 285 and play for a few min then it will just hardlock and then i get all kinds of weird screen corruption, 280-281 seems 2 b my max even tho i know my CCBWE 0547 TMPW opty 175 can do more

Dragon

PS i noticed a weird and differnt corruption if i had my DQS skew value set very high with it on increase skew, it was almost like the ram was just plain trying to read to early (i tried changing trefs and other read timing but nothing else changed it like this) so i just set it to auto and it dosn't happen

[[XC] Oj101]

If clock for clock it outperforms BH-5 there was something wrong with your timings...

[FireDragon]

i was thinking the same thing but it was just as fast for latency and faster for bandwidth at the same cpu speed and memory speed in everest, memtest and sandra, and after looking at my bh-5 timmings there is nothing wrong with them if anything they r very tight, i had that mem for a while so i have done a lot of tweaking with it, this was at 255 and a cas of 2.5 not 3 but atm they r at 37.3 NS access time in everest at timings and so on in sig

Dragon

ps. other kits by ocz with the same timings and a trp of 2 even on review sites matched bh-5 almost clock for clock

[FireDragon]

BTW, the OCZ mem i am reffering to was CE-5/6 not these Nanya IC's tbh i am not even sure that these r CE-5/6 of some kind? maybe a die shrink or a new revision since Infenion, Micron, Nanya are kinda one now? if they r CE-5/6 they don't like the same timings that most ppl have posted, that could just b my cpu/mobo, but i can't find JACK on these Nanya ic's sept that they where not made to go into dram modules, they where a specialty IC that they made, i found the data sheet on Nanya's website my ic's r NT5DS64M8CS-5T, kinda weird IMO

Dragon