yeah if you want good support id recommend evga, they seem to be very active in that regard, even pro-active...
about force reset, i tested the force reset button quite extensively to make sure it doesnt cause any problems
i pushed it constantly for over 2 hours, sometimes continuously, at 1-15s intervals (during windows boot=load) and there were no problems whatsoever... windows xp didnt even corrupt!
I went with the EVGA 132-BL-E758-A1. I'm hoping the hoses I have will reach just fine. I should be okay, since I won't have the waterblock on the motherboard anymore.
evga x58 SLI
Core i7 920
Mushkin XP3-12800 7-8-7-20
4870x2
PCP&C Silencer 750w
Kingston SSD
Seagate 1TB 32MB
WD EARS 2TB 64MB
D700
CPU Loop
Aqua Compuer Cuplex Kryos XT, Swiftech MCP355, XSPC Top, Swiftech MCR320-QP (Scythe SFF21F x3), PrimoFlex Pro LRT UV Red Tubing - 3/8in. ID x 5/8in. OD
Nice! I love my EVGA Classified and the customer service is ridiculous!
Update:
Got a call from my parents (had to send it there because Foxconn won't send to an FPO Military Address) that the board has arrived. Should be in the mail Friday on its way back to me.
Core i7 920 D0 @ 4833.55Mhz~EVGA "Classified" E760~XFX HD5870~6GB G.Skill Perfect Storm DDR3 2000~Corsair HX1000~2x WD Velociraptor 150GB RAID 0~WD Cavier Black 1TB~Custom Danger Den Water Box Plus~Windows 7 x64 RTM~Dell 2407WFP
H20! CPU Loop: MCP-655~Swiftech MCR-220~HEATKILLER® 3.0 LT GPU Loop: MCP-655~XSPC RS240~EK FC5870 Plexi+Nickel
Sorry to bring up this post but anyone knows what it means when you turn on the PSU, you get the blue led blinking as well as the reset and power buttons in the board? I just finished leak testing and when I put power on, it does this. I can't see any leak so I would say it there wasn't anything shorted.
Any info would be greatly appreciated. Thanks...
Just a little update. I tried the Corsair HX1000 on it. Blue LED doesn't blink now, so does the amber LED. There is nothing on the debug LED though. Do I have a large paper weight now?Sorry to bring up this post but anyone knows what it means when you turn on the PSU, you get the blue led blinking as well as the reset and power buttons in the board? I just finished leak testing and when I put power on, it does this. I can't see any leak so I would say it there wasn't anything shorted.
Any info would be greatly appreciated. Thanks...
Last edited by maxxx; 10-17-2009 at 05:33 PM.
Posting Permissions
Reply With Quote
Bookmarks