MIPS WATERCHILLER BASIC & Danfoss EKC 101

[Expat GriZ]

Hello to all and just wondering if anybody has any experience with this water chiller & control unit?? They are in Germany. I've used the translator on the description but would really like to know from any and all what you think of this combo. http://www.mips-computer.de/

Regards,
GriZ

Added a couple pics

[Expat GriZ]

HERE IS THE TRANSLATED TEXT.


Our new active water cooling unites the respective advantages of a compressor cooling as well as a water cooling. Finally you know all relevant parts of your system with approx. 10 - 15c cold water cool, thus CCU, chip set, Mosfets, diagram map (n) and which one otherwise still everything can cool with water!!! Thereby the total performance of a system can be substantially increased again, e.g. 12670 3DMark06 points sees left: http://www.futuremark.com/community/...fame/3dmark06/ If you want to come likewise world-wide under the TOP 10 Bencher and the whole without giant expenditure (i.e. without cascades, nitrogen, dry ice etc.), then give it at present to our Waterchiller no alternatives. Even the titanium run radiator everything are handy but!!! A pure compressor cooling only for the CCU is today no longer up-to-date and/or the CCU - increased output in relation to our active water cooling is meanwhile negligible. With our whole tests with different current Conroe CPU´s showed that with our active water cooling a X6800 can be brought on approx. 4 GHz, which knew same X6800 with compressor cooling stably on approx. 4.2 - 4.3 GHz is brought. The remaining components of of a compressor-cooled system should be cooled in these achievement regions however also with water, which usually takes place with a normal passive water cooling, which must be inserted still additionally with. Passive water cooling is called in this case not without exhausts, but a normal water cooling with radiator, exhausts etc., whereby the cooling water can have however at the most the ambient temperature, and/or shortly after switching on on then already 35 - reaches 40 C. Exactly at this point our active water cooling (Waterchiller) sets. Many DEGREES and/or Speedfreaks uses already today a more or less complex water cooling and wishes themselves nothing more ardently than the water temperature to lower. Our Waterchiller can be combined with the existing water cooling and had we it as compactly as possible built that he can be built even into certain housings (e.g. LianLi V2000, PC343 etc.)!!! Over the optionally available controls (Danfoss and/or our own Waterchiller Guard) then the respective desire temperature can be stopped by 0 15 C. With our tests with an full-equipped system (P5W DH, X6800, 2 x X1900er, chip set & Mosfets of everything water-cooled) could hold the Waterchiller the water temperature approx. 15C with full load. With only approx. 200W load descends the water temperature then to approx. 0 3 C. Since depending upon outside temperature and/or air humidity forms starting from 10-14 C condensation, the achievement of the Waterchillers appears to us as absolutely sufficient. We recommend expressly the use of an optional control, thereby you your hardware not by condensation destroy!!! Our Waterchiller basic comes installed on an aluminum plate to you home, only inserts, attaches and goes to ' S. off. Important note: This cooling system is not a 220V plant and should from there only by an electrician be attached and verkabelt, we takes over any adhesion for personal injuries or other damage to your hardware!!! If you do not think yourselves capable of the installation or you the expenditure are too large, we offer in this column also already finished developed housing inclusive Waterchiller to you. Technical data: Compressor: Danfoss NL11F Cooling agent: R134a Achievement: 1/3 HP Capacity: 235W Tank: High-grade steel Tank volume: approx. 440ml Exhaust condensor: silenx ixtrema 120mm, 18dBA, 90cfm Power pack: MW RS-25-12, 12V 25W, 2,1A Dimensions: Baseplate: Aluminum 190 x 460 x 3 mm Overall height: approx. 230mm Manufacturer: MIPS computer GmbH Part number: MWC001 Price: 499.00 EUR inclusive 19% VAT. zzgl. forwarding expenses