New E6600 batches, post your Overclock

[babalouj]

I just lapped mine from Tankguys and am currently running orthos small ffts at 3.81GHz with 1.37vcore at 44C. This is a very nice chip. Once I get some info I will post some screenies.

The temps you see very well could be real. That is where I was before I lapped the IHS. Now it is running quite cool.

The temps can't be correct because my old chip would be loaded at around 50C and the IHS would be 40C. This chip A) loaded is reporting 62C and the IHS is actually 34C and B) it probably wouldn't be stable at this temp and voltage if the temp were correct. I guess the IHS could be making poor contact with the die but i lapped the IHS and I know the IHS is making great contact with the waterblock.

On a different note, you seem to be seeing similar volt/mhz correlations I am. I am also priming at 3.8ghz with around 1.37-1.38V. Let me what you get your chip up to.

[_G_]

Unfortunately they are OOS. They only got a few in and they went quick. But don't be afraid of the L629F. Mine ROCKS. I had some 32M Pi runs at 4+ GHz, orthos stable at 3.6GHz and 1.43vcore. Very nice chip considering what has been around lately.

oh well, was waching there site around the 14-15 but never saw them come in
guess il sit out this round until the q6600 price drop

[virusul]

E6600 L704A607 SL9ZL 03/23/2007
3708 Mhz 4now

[Ad1tya]

I had an L629B953, tested for some1.. it kinda sucked.
It did worse than my L626A154.

The L629B did 3.6 Ghz Stable @ 1.46 vCore, while my L626A, did 3.6 Ghz Stable @ 1.42 vCore.

Temps for the L629B were 46C under load, while the L626A were around 41C under load. This with a Apogee + MCR220 + MCP655...
Not lapped.

[Daveb2012]

Im still gradually testing stability with this one, but here is the highest clock I could reach with out it crashing. this is using a Thermalright 120 extreme, with cool ambient temps.
cpu is: L640F037

[dnottis]

Im still gradually testing stability with this one, but here is the highest clock I could reach with out it crashing. this is using a Thermalright 120 extreme, with cool ambient temps.
cpu is: L640F037

By gradually testing do you mean every day stability without running Orthos cause it crashes immediately? Seriously though, I'd love to see 8 hours Orthos at that speed on air!!

[chaos_being]

Quick addition to the thread- I'm working with my L644G425 now, and so far it doesn't seem too bad. It passed 12 hours of Orthos blend priority 9 last night, at 3.2ghz, 1.37v bios (more like 1.35v real- stock voltage is 1.35v.) I'm testing 3.3ghz now at the same voltage. I'm aircooled with a Ultra-120 Extreme, load temps are currently ~40c. Wish me luck with this thing

[sofarfrome]

A brand NEW xeon-3060 batch L631B115

$159.99 shipped...I can't wait to test that baby

[nealh]

A brand NEW xeon-3060 batch L631B115

$159.99 shipped...I can't wait to test that baby

another B chip...one how good it will be

Damn ...you sure seem to get some nice chips...

BTW how did your L629B do?

[sofarfrome]

another B chip...one how good it will be

Damn ...you sure seem to get some nice chips...

BTW how did your L629B do?

Right now the L629B is 8+ hours orthos blend stable at 3.71GHz with 1.4vcore. I did get one 4.1GHz 32M Pi run with 1.52vore but I am sure it is not orthos stable. Had to lap it as usual. Once that was done the temps became very manageable under water.

[Daveb2012]

By gradually testing do you mean every day stability without running Orthos cause it crashes immediately? Seriously though, I'd love to see 8 hours Orthos at that speed on air!!

The screen shot was meant to show its highest clock, I posted this after owning it less then 24 hours.

[nealh]

Right now the L629B is 8+ hours orthos blend stable at 3.71GHz with 1.4vcore. I did get one 4.1GHz 32M Pi run with 1.52vore but I am sure it is not orthos stable. Had to lap it as usual. Once that was done the temps became very manageable under water.

all I could say is I wish I got your luck on cpu's

very sweet chip..al I can do is

[TheWolf]

A brand NEW xeon-3060 batch L631B115

$159.99 shipped...I can't wait to test that baby

Were did you find a 3060 for that price? You can PM me with the details.

I want one!

Running a L651B 6320, my everyday running speed, screen below. Max so far is 7x475 3325
AB9 QuadGT/Super Talent T800 max dual channel 1275, single 1332.
Edit: Aww yea those are full load temps... of F@H WinSMP on air.
vdroop on vcore as you can see & ddr is really 2.25v more vdroop.

[nealh]

Were did you find a 3060 for that price? You can PM me with the details.

I want one!

Running a L651B 6320, my everyday running speed, screen below. Max so far is 7x475 3325
AB9 QuadGT/Super Talent T800 max dual channel 1275, single 1332.
Edit: Aww yea those are full load temps... of F@H WinSMP on air.
vdroop on vcore as you can see & ddr is really 2.25v more vdroop.

it was ebay..he got lucky there was no reserve

[TheWolf]

it was ebay..he got lucky there was no reserve

Musta been a while back cause I been watching both 3060 & 6600's a few weeks.

[SharkerSk]

My e6600 L632A did 3600 ~ 1.41V


Watercooled By D-Tek FuZion

A brand NEW xeon-3060 batch L631B115

$159.99 shipped...I can't wait to test that baby

Were did you find your 3060 with these FPO for that price? Could you PM me with the details.

I want one too

[allany]

Were did you find a 3060 for that price? You can PM me with the details.

I want one!

Running a L651B 6320, my everyday running speed, screen below. Max so far is 7x475 3325
AB9 QuadGT/Super Talent T800 max dual channel 1275, single 1332.
Edit: Aww yea those are full load temps... of F@H WinSMP on air.
vdroop on vcore as you can see & ddr is really 2.25v more vdroop.

Can you tell me please what Memory Latency do you have(in everest)?

[before]

My e6600 L632A did 3600 ~ 1.41V


Watercooled By D-Tek FuZion



Were did you find your 3060 with these FPO for that price? Could you PM me with the details.

I want one too

And what about me!

[sofarfrome]

Musta been a while back cause I been watching both 3060 & 6600's a few weeks.

bidding closed friday 5-18-07 in the AM.

[TheWolf]

bidding closed friday 5-18-07 in the AM.

Dam how did I miss that one! Must came up when I wasn't looking.
I been keep a lot of stuff marked as watching, guess maybe I should have made a bid. Better notification.
You have so many good ones, ever sale any?

[TheWolf]

Can you tell me please what Memory Latency do you have(in everest)?

Here are a few test I've ran.


Memory Read

[Maxxpower]

someone with an L643G batch/FPO?

[nealh]

are all the IHS concave on the L629F chips...

not sure I would want to lap the chip

[chaos_being]

I've been working with my L644G425 for at least the past two weeks, I've never had a setup which was so difficult to get orthos stable before. So far it is (hopefully) stable at 3.4ghz with 1.48v...this thing is a glutton for voltage, and a miser with the mhz At least it isn't faring as badly as some of the other 44G's I read about. I think most of my stability problems at this point is getting the voltage *just right* for my ram, it seems to picky as all heck. On the other hand, my QuadGT could do 400fsb without a single voltage increase, lol.

I'm seeing if 8x425 is any more stable than 9x378. On the latter, I was trying to run my ram 4:5 so I didn't have to underclock it, and it seems that a lot of my stability frustrations were hanging on that wish of mine. Hopefully 8x425, 1:1, will be stable, because I'm actually getting sort of tired messing with it.

[ccokeman]

are all the IHS concave on the L629F chips...

not sure I would want to lap the chip

Mine did not appear to be and gets great temps at 1.425v. 52 to 54c loaded at 395x9. This clock was way to easy but now its in the wifes rig so no more playing.