Those in bold aren't Micron D9. They don't overclock at all, at rated voltage/timings/freq they run hot like deepest deep of hell and don't even post on some motherboards.PC2-6400 800MHz DDR2 Ultra Dual Channel Kit SKU: GX21GB6400UDC / GX22GB6400UDC PC2-6400 DDR2-800MHz CAS 4-4-4-12 1.8v ~ 2.3v
Be warned, they are not D9. Mine are week 27, I heard that some have had D9 but don't know in which week they switched. Also GX22GB6400UDC Plus are D9, from what I know.
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Only early versions had Micron D9GMH. Current ones have either Aeneon or Elpida.Originally Posted by xoqolatl
Thanks for the heads up xoqolatl and r00n
Its just wrong when a set is released and reviewed with good ratings, then changing the IC's
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
someone needs to add these to the list,
http://sg.vr-zone.com/?i=4638&s=6
I have this kit for sale...
TWIN2X1024A-5400UL 675MHz 3-3-2-8-1T CM2X512A-5400UL
Anyone interested pm me!
Processor: Intel Core 2 Quad Q6600 G0 2.4@3.33 Ghz (1.28 vcore under load) with Arctic Cooling Freezer 7 Pro
Videocard: BFG GTX 260 w/ Dell SP2309W
Mainboard: Asus P5Q-E Pro w/ Antec TruePower 2.0 550 SLI-Ready in Antec 900
Memory: 4GB @ DDR2-740.
Speakers/Sound card: Logitech Z-2300 w/ Creative Labs X-Fi Xtreme Music
Harddrives: RAID0 with 2 x 500GB Seagate Barracudas SATAII
I am using matched pair Corsair XMS2 6400 2048MB (2x1GB) 4-4-4-12 TWIN2X2048-6400C4 and they are a good bargin. I managed a best stable frequency clock of 2x534.3MHz at 5,5,5,15, FSB-DRAM of 1:2 with 2.1v recommended max. volts. They are cheaper than the 6400C3 and a grade lower from these. A massive bandwidth improvement over stock and I can run the tighter latency 3,3,3,12 but at frequencies below 400 MHz. I actually got the best bandwidth latency test at a slightly smaller overall bandwidth using 2x525.8 MHz, FSB-DRAM of 3:5 with 2.1v. It's always impressive to run these at PC2-8500 from the standard rate of PC2-6400. You definitly need a good Mobo and other bits to get good numbers. They rock for the price to performance ratio.
Very nicely done and well organized list. Thanks for this.
Main Rig - i5 2500K@42x (Turbo)...2x2gb Corsair DDR3-1600...Asus P8Z68-M Pro...Corsair HX620 PSU...Hanns-G 19" LCD...80GB Intel SSD...2 x 1TB Samsung HDDs...Zalman CNPS9700...Ultra Aluminus (black)...Win 7 Ult x86
HTPC - AMD A6 3650 stock...2x1gb G Skill DDR3 1600...Asus F1A75-V Pro...Corsair HX520 PSU...2x80gb WD Sata2 RAID0 HDD...Silverstone LC17 B...Olevia 42" LCD 1080P...Yamaha HT Receiver...JVC 5.1 speakers and sub...Win 7 Ult x86
please add to list
DDR2 Ultra Dual Channel Kit
PC2-8500 DDR2-1066 Dual Channel Kit
SKU#: GX21GB8500PDC | GX22GB8500PDC
DDR2 Ultra Dual Channel Kit
PC2-8000 DDR2-1000 Dual Channel Kit
SKU#: GX22GB8000UDC | GX22GB8000UDC
both GEIL.
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Hehe Geil used to be good a few years back but they are just a bunch of 'kin pirates now
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
KVR667D2N5K2/2G kingston value ram got some with d9gmh
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
I have the TWIN2X2048-6400C4* XMS2-6400 2048MB 4-4-4-12 2X240 DIMM Black XMS2 and the bandwidth test on sandra is giving me really bad results. at 690Mhz 4-4-4-12 @ 2.1v I'm getting 6100Mb/s how does this seem to you. I,ve tried running them at a little higher than 800Mhz somewhere around 20-30Mhz more and I can't ge them stable. Also what bandwidth should I be getting with this kit on the p35. Thanks for any advice you can give.
University of Florida Graduate 2005
CPU: Q6600 @ 3.55Ghz @ 1.52v bios lapped
MEM: Crucial Lan Fest 2x 1GB DDR2 1185 @ 2.275v
MOBO: IP35 PRO Hacked W/ heat pipes modded using MX-2
PSU: 600W POWERSTREAM
GPU: 8800GTS 602/908
COOLING: Thermalright Ultra Xtreme - Lapped - 2x 12CM S-flex
Thermal Interface: MX-2
Case: Cooler Master CM-690 5x 12CM Fans
OS: Vista, XP, Ubuntu
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
sorry i thought it would be ok to post here. In the beginning it says the sticks in red are for xtreme users. My experience with them would suggest otherwise. Is there something I'm doing wrong?? Let me know. Has anybody else had good results with these sticks?
Quadzilla what mobo are u using and what bandwidth do you get in sandra?
Edit: Thanks to quadzilla's post I got an idea where I should be at and I currently got my memory at 1035Mhz @ 5-5-5-15 1T @ 2.1V. Not sure if my board actually does 1T read something somewhere about that, but that is how its set up in the bios. I've primed this for 9 hours and also ran 32 passes of memtest on these settings. My bandwidth still seems a little low. Right now I'm scoring 6.7GB/s bandwidth in sandra. When I tested some Gskill memory on an m2n-e board at ddr2 800 5-5-5-15 I got a score of 7something GB/s. I guess AMD is still the leader in memory performance. Also has anybody messed with the advanced memory timings for this memory. I'd like to know where to start there.
Last edited by yasoumalaka; 09-22-2007 at 10:23 AM.
University of Florida Graduate 2005
CPU: Q6600 @ 3.55Ghz @ 1.52v bios lapped
MEM: Crucial Lan Fest 2x 1GB DDR2 1185 @ 2.275v
MOBO: IP35 PRO Hacked W/ heat pipes modded using MX-2
PSU: 600W POWERSTREAM
GPU: 8800GTS 602/908
COOLING: Thermalright Ultra Xtreme - Lapped - 2x 12CM S-flex
Thermal Interface: MX-2
Case: Cooler Master CM-690 5x 12CM Fans
OS: Vista, XP, Ubuntu
Excellent list,thanks a lot
But i need to build 2 sys Q6600 G0,with AT LEAST 4 gb.Ok,for overclocking purposes,4g.I need to go up to at least 3.6 with my q6600.Heavy use,24/24/air cooled.
What sticks do you recommend? And should i build 4x1 gb sticks or 2x2?
Tracers?....or BL2KIT12864AA804 http://www.crucial.com/store/partspe...2kit12864aa804
Or Mushkin 2x2?
I'm really confused,2x1gb is clear for me,but 2x2 or 4x1...pls help me
Hi guys , where do 8500 Ballistix fit into the list ? I have a set but they dont clock that well for me and I was just told that they are not D9's . I will be sure to buy my next set off this list .
Do any of the 2x2GB sets clock at all ?
Thanks for the good work.
heikis - thats nice there , are they the Vitesta Extreme CL4 rams ?
.
Last edited by aussie-revhead; 01-12-2008 at 11:35 PM.
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Super Talent T1000UB1G4, rated 1000MHz, running in cl4-4-4-10 @ 2.15V at this speed! Awesome.
Micron D9 based chip, not sure what batch tough, probably GKX.
Last edited by laragirl83; 01-31-2008 at 11:13 AM.
ASUS P6T Deluxe V2
INTEL74 CORE I7 920 D0 (3924A346) 20*180MHz ~ 1.176V @ SCYTHE MUGEN2
3*1GB MUSHKIN XP3 @ 1440MHz CL7-7-7-21 ~ 1.60V
ZOTAC GeForce GTX260 @ 650/1300/2400MHz ~ ARCTIC COOLING ACCELERO GTX280
CORSAIR VX-550W
>>Micron D9 based RAMs and Electromigration<<
HUNGARY
Looking forward to upgrade my pc within two weeks and i'm really confused in chosing ram kits. I want it fast and perfect for overclocking.
I've decided on q6600 G0 and Gigabyte EP45-DS4
i have several choices
G.skill PC2-8000 PQ
Mushkin Redline PC2-8000
G.skill PC2-6400 cl5 PI, is this the one which can be operated @ 1066 cl5 and 800 @cl4
Intel Core 2 Quad Q6600 L807A
TRUE-120 / Scythe ULTRA Kaze
Gigabyte EP45-DS3
G.Skill PC2-6400 8GB (4*2GB) PQ
Sapphire HD4870
2* Seagate Barracuda 7200.10 320GB
Samsung EcoGreen F1 1TB
Western Digital Green 1TB
Enermax Noisetaker II 600watts
LG L226WTP-BF 22-Inch
Gigabyte 3D Aurora 570
Apple MacBook MB402LL/A
I didn't find any cellshoks here
what about them?
How about This:
http://www.ocztechnology.com/aboutocz/press/2009/339
An unfortunate person is one tries to fart but sh1ts instead...
My Water Cooling Case Build (closed)
http://valid.canardpc.com/show_oc.php?id=638273
Crucial with D9GMH 2,7v
Bookmarks