Custom phase change controller "Golden Froster"

[Ssilencer]

Contact me in the meanwhile for any Controller

UPDATING THE LINE AS FEBRUARY 2007

G-FROSTER CASCADE MENU TEASER

G-Froster X
Specifications:
Hardware:
• (4) Inputs for temperature sensors.(1 included)
• 1 Alphanumeric LCD port.(20x2 blue lcd)
• 1 PSU power control.
• 1 Motherboard power-on/off control.
• 1Compressor power control.
• 1 Fan port.
• 1 RS-232 comunication port.
• 1 Face plate included

Software:
• Temperature monitoring
• Fan speed, power-on temp, power-off temp configurable .
• Pc power-on delay.
• Automatic pc-shutdown in case of reaching critical temperature.
• Compressor Power on delay to to prevent damage
• Firmware update by serial port

DISCONTINUED, REPLACED BY THE NEW X3 CONTROLLER
----------------------------------------------------------------
X3 CONTROLLER:



4 K type thermal probes inputs (probes not included) SENSES UP TO -150C
5 TEMPERATURES SENSING (4 K TYPE PLUS AMBIENT BY EMBEDDED PCB PROBE)
Can set start up on any thermal probes
Start up/shut down by temps; temp in tray; control fan speed
Keyboard included to control start up/shut down temps, setting thermal probes
win soft for control start up/shut down temps, setting thermal probe and fan speed (HIGH, LOW OR AUTO FEATURE, CONTROL BY TEMPS) 1.5AMPS OF FAN POWER (3 PANAFLO H PLUS ANOTHER 120X25 FAN). PLUS CUSTOM COMPRESSOR RESTART SAFETY MEASURE.
20x2 lcd display
Comes in a 5 1/4 bay case, face plate included
Serial connection, firmware upgradeable (future proof, adding features)
Failure control (continuous reading of 5v line)
Accept future daughter board (extra fan control, etc)
Failure control by "temp nurse" *

ALL OPTIONS ARE CURRENTLY AVAILABLE, NO FEATURES ON THE SOFT JUST FOR LOOKS , ALL OF THEM WORKING...
----------------------------------------------------------------------------------------------------------------------------------------

NEW XE 2.0



2 K type thermal probes input (probes not included)
3 TEMPERATURES SENSING (2 K TYPE PLUS AMBIENT BY EMBEDDED PCB PROBE)
Can set start up on any/both thermal probes
Start up/shut down by temps; temp in tray; control fan speed
win soft for control start up/shut down temps, setting thermal probe and fan speed (HIGH, LOW OR AUTO FEATURE, CONTROL BY TEMPS) 1.5AMPS OF FAN POWER (3 PANAFLO H PLUS ANOTHER 120X25 FAN). PLUS CUSTOM COMPRESSOR RESTART SAFETY MEASURE.
16x2 lcd display
Serial connection, firmware upgradeable (future proof, adding features)
Failure control (continuous reading of 5v line)
Accept future daughter board (extra fan control, etc)
Failure control by "temp nurse" *

New control pannel and firm update available for the X3 and XE 2.0 controllers

*Updated look of the control panel.

*Added custom text in screen routines:
1_You now have 5 different custom text screens to show whatever you want on them.
2_Every screen has its own delay setting, letting you show each of them for different periods on screen.
3_You can mix with your custom text any of the 3/5 (XE 2.0/X3) temps the controller shows.
4_You can choose to individually enable/disable any of the 5 custom text screens at anytime.

CHECK THE VIDEO OF CUSTOM SCREENS EXAMPLE
http://www.gigasize.com/get.php/-110..._Guide_1.2.pdf
Download quick calibration guide for XE2.0
DOWNLOAD THE LATEST CONTROL PANNEL AND FIRM FROM HERE

ALL OPTIONS ARE CURRENTLY AVAILABLE, NO FEATURES ON THE SOFT JUST FOR LOOKS , ALL OF THEM WORKING...
-----------------------------------------------------------------------------------------------------------------------------------------
UPDATED G-Froster Xe 1.6

Specifications:
Hardware:
• 1 Input for temperature sensor (included).
• 1 Alphanumeric LCD port.(16x2 blue lcd or green)
• 1 PSU power control.
• 1 Motherboard power-on/off control.
• 1Compressor power control.
• 1 Fan port.
• 1 RS-232 comunication port.
• 1 Face plate included

Software:
• Temperature monitoring
• Fan speed, power-on temp, power-off temp configurable .
• Pc power-on delay.
• Automatic pc-shutdown in case of reaching critical temperature.
• Compressor Power on delay to to prevent damage
• Firmware update by serial port

ALL OPTIONS ARE CURRENTLY AVAILABLE, NO FEATURES ON THE SOFT JUST FOR LOOKS , ALL OF THEM WORKING...


G-Froster Xe installaion guide
G-Froster Installation manuals and software downloads thanks to DaBbLe
G-Froster Value and XE 1.6 latest firm and soft
------------------------------------------------------------------------

G-Froster value 2.0
• 1 imput for thermal probe
• 1 16x2 LCD display
• 1 PSU power control
• 1 compresor power control


Features:
• Temperature monitoring
• Pc power-on delay.
• Automatic pc-shutdown in case of reaching critical temperature.
• Compressor Power on delay to to prevent damage

Software control, fan control and serial comunication on the value.


Units works independently of the power the Pc (have his own psu)

G-Froster Face plates



G-Froster value unit




G-Froster Xe




G-Froster X





G-Froster X control pannel



G-Froster Xe and Value 2.0 Control pannel