MMM
Results 1 to 25 of 25

Thread: E6700 ES @ 4.5Ghz w/1.55v single stage phase

  1. #1
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882

    E6700 ES @ 4.5Ghz w/1.55v single stage phase

    CPU: Intel E6700 ES @ 4.5GHz
    MB: Intel D975XBX "Bad Axe" rev. 304 (stock board with exception of Vdimm mod)
    Memory: 2x1GB OCZ DDR2 PC-8000 Platinum XTC Extreme Edition @ 3-3-3-8 (DDR-900)
    PSU: PCP&C Turbo-Cool 1kW
    Cooling: 'Chilly1' modded VapoLS single stage autocascade phase change unit

    CPU Voltage: 1.550v (by BIOS) - real ~1.520v
    MCH Voltage: 1.725v (by BIOS) - real ~1.690v
    FSB Voltage: 1.395v (by BIOS)

    Evap temp @ idle: -50C
    Die temp @ idle: -36C
    (Fully-loaded temps unrecorded at this time)

    FSB: 450Mhz -> 1.8GHz (1800MHz)
    Multiplier: 10x (stock)
    Frequency: 4.5GHz (4500MHz)
    Default Speed: 2.66GHz (266MHz x 10)
    % OC: ~69%

    SPI 1M (mod 1.5 XS): 11.578 seconds



    -FCG

    Last edited by freecableguy; 06-20-2006 at 07:27 PM.

  2. #2
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    On the edge of Technology
    Posts
    1,141
    ah, very nice. Step 5 I assume?

    Wish I had phase
    Quote Originally Posted by dmn_link (Gamespot)
    Am I being watched by a hacker?

    I just went to change my display picture for my Windows account and saw and account that i have never created before. The account name is ASP.NET Machine A...'s .

  3. #3
    Registered User
    Join Date
    May 2006
    Posts
    71
    conroe's still seize to amaze me
    any pics of the whole setup?
    3200+ (looking for nice opty or 4400+) stock clocks :: Ocz gold 2x1GB ddr500 @ 250mhz
    BFG 7900gtx OC stock (saving for another):: dfi lanparty ultra-d modded to SLI
    OCZ modstream 520W :: 160gb WD IDE

  4. #4
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,258
    wow
    edit : what's your daily clock on phase ?
    Last edited by Supertim0r; 06-20-2006 at 06:53 PM.
    retired computer enthusiast

  5. #5
    Xtreme Enthusiast
    Join Date
    Aug 2005
    Posts
    963
    Ownage
    .:: Gaming PC Specs ::.

    Case: Antec Nine Hundred
    CPU: Intel Core i7-2600K @ 4.6 GHz, 1.44v (cooled by Xigmatek GAIA) [IntelBurnTest{Linpack} stable]
    GPU/Monitor: VisionTek HD 6950 @ 6970, 950 MHz/1375 MHz 1.30v + Sony BRAVIA 32EX400 1080p
    Motherboard: GIGABYTE Z68XP-UD4 F5
    Memory: 16 GB (4x 4 GB) Corsair Vengeance LP DDR3 1600
    Hard Drive: 2x Seagate 500 GB 7200.11 RAID 0 & RAID 1 (Matrix RAID) + 1x WD Caviar Black 640 GB
    Sound: Creative SB X-Fi Fatal1ty Profess1onal, Logitech X-530
    PSU: Corsair AX-1200 (1500W PSU!)
    O/S: Microsoft® Windows 7 Ultimate SP1 X64

  6. #6
    Xtreme Addict
    Join Date
    Jun 2004
    Posts
    1,280
    Both E66 & E67 5's clking very nice. nice 1M FCG.

  7. #7
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,656
    Im sure 3D scores to come.

    Looking good.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  8. #8
    Registered User
    Join Date
    Dec 2004
    Location
    Atlanta
    Posts
    800
    Mmmm tasty. I can'g wait to get a conroe under the ol vapo.

    Looking forward to the 3D results!

  9. #9
    Registered User
    Join Date
    Apr 2006
    Location
    Durham, NC
    Posts
    38
    Impressive, Conroe looks more promising everyday.

  10. #10
    Xtreme Enthusiast
    Join Date
    May 2004
    Location
    ILLinois
    Posts
    625
    Now we just need somebody to break 5ghz and get under 10s on super pi

  11. #11
    Xtreme Member
    Join Date
    Jun 2005
    Location
    Melbourne, Australia
    Posts
    364
    VapoLS as an Auto? Wow.. Pics of your setup pls.

    Awesome 1M btw Looking forward to some 3D action!

    C-BuZz

  12. #12
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    Northern VA
    Posts
    1,556
    WOWWWW. incredible results!
    4.0GHz or bust for testing air
    4.5GHz or bust for 24/7 phase
    4.7GHz or bust for DI benching
    those are my goals for my future E6700 think i can reach them?

  13. #13
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882
    I think this chip would scream past 5Ghz with LN2 with no problems at all. This is definately one of the better stepping 5 chips that I have tested....certainly is my favorite.

  14. #14
    X.I.P
    Join Date
    Mar 2005
    Posts
    1,964
    it is really nice to see!

    LN2 it XD

  15. #15
    ln2nl
    Join Date
    Jun 2004
    Location
    The Netherlands
    Posts
    1,659
    Quote Originally Posted by freecableguy
    I think this chip would scream past 5Ghz with LN2 with no problems at all. This is definately one of the better stepping 5 chips that I have tested....certainly is my favorite.
    I hope to... but if the board does that fsb
    *EDITed by IFMU*
    Signature Removed by XS Staff for not following XS Policies

    Forum Policies

  16. #16
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Most likely board will limit. But hey, we have other boards coming soon and we have already seen 600fsb on dfi
    ...

  17. #17
    ln2nl
    Join Date
    Jun 2004
    Location
    The Netherlands
    Posts
    1,659
    huh wich chipset kiwi?
    *EDITed by IFMU*
    Signature Removed by XS Staff for not following XS Policies

    Forum Policies

  18. #18

  19. #19
    ln2nl
    Join Date
    Jun 2004
    Location
    The Netherlands
    Posts
    1,659
    It hasnt been tested before so we cant say
    *EDITed by IFMU*
    Signature Removed by XS Staff for not following XS Policies

    Forum Policies

  20. #20
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Quote Originally Posted by Waus-mod
    huh wich chipset kiwi?
    975X

    http://www.xtremesystems.org/forums/...4&postcount=97
    ...

  21. #21
    Xtreme Member
    Join Date
    Oct 2004
    Location
    Germany / Cologne
    Posts
    119
    why are you guys always showing those stupid superpi-scrores? i´d like to see some stable results...
    nothing to say

  22. #22
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Because the primary title is XtremeSystems, and only secondary is XtremeStabilitySystems
    ...

  23. #23
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    On the edge of Technology
    Posts
    1,141
    Quote Originally Posted by LoKi2k
    why are you guys always showing those stupid superpi-scrores? i´d like to see some stable results...
    I already showed 3.85GHz prime stable

    FCG probably has 4.25-4.3GHz 24/7 right there.
    Quote Originally Posted by dmn_link (Gamespot)
    Am I being watched by a hacker?

    I just went to change my display picture for my Windows account and saw and account that i have never created before. The account name is ASP.NET Machine A...'s .

  24. #24
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882
    First run at 3DMark05:

    4.4Ghz here, still working on getting a little more 3D stable
    Also, upclocked the DDR2 to 4:5 for DDR-1100. Nothing stupid on the volts here, just 2.4 although I think I could lower this easily...




    -FCG

  25. #25
    Xtreme Enthusiast
    Join Date
    Jul 2004
    Location
    denmark
    Posts
    628
    these seems ti show that badaxe is the most stale board at high fsb ,or im i wrong? even though dfi for exampl can 533 fsb in biose ,no one is really stable over 400 .just a thought.
    Gigabyte X38T-DQ6/2x1gb xtreme/2x2900xt
    E6850@ 4500
    1000w psu/vapo Ls/2x74gb raptor raid.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •