Jinu117 SS Worklog (vapoli, UFO, etc)

[predator500]

I would love to have one like that myself very nice work.

[Hell-Fire]

To often we begin to take for granted when people do great work. We expect someone's work to be awesome, without taking into consideration that they actually have to sit down and do the work.

Two thumbs way up man: :thumbsup::thumbsup:

At the risk of contradicting myself, nice work as always Jin.

[Skinny13]

OMG!!! well done!

[jinu117]

Wow, thanks for great replies guys I have been tad busy working on few new ideas I got (no not this type of unit but something else...:P) that might fit in v2000 as well. It might be tight fit... or not work at all. I hope it does as I am investing decent amount of money to figure out.
I gotta say the new condenser is the bomb for sure. It is bit costly, but the finish and quality of build is great. And there is even more way to increase capacity in same form factor if I decided to spend even more for condenser. It might become necessary later but for now, this is more than sufficient.
I have quite a few people who asked about specific of condenser so I am going to use this thread to post it up.
Dimension is, 6.3 inches high, 6.75 inches wide, 2.4 inches deep. 3/8 tubing and I think 11FPI... to reduce air turbulance and make slower turning fan work fine with it.
Chilly1 should stock some... I am not sure how much he have in hand now but if he runs dry, I do have some in my hand to supplement for some quantity. Enjoy

[Gray Mole]

Yup, definitely Jian-Li

You're making them look good sir, and that's the real battle. We already know the system will be nice and cold, but for a beautiful case you want a beautiful install and you've definitelly got that

Nice condensors too. I think the only thing that would improve it would be getting them in black for the Black Lian Li cases

Gray

[placebo]

Wow, thanks for great replies guys I have been tad busy working on few new ideas I got (no not this type of unit but something else...:P) that might fit in v2000 as well. It might be tight fit... or not work at all. I hope it does as I am investing decent amount of money to figure out.
I gotta say the new condenser is the bomb for sure. It is bit costly, but the finish and quality of build is great. And there is even more way to increase capacity in same form factor if I decided to spend even more for condenser. It might become necessary later but for now, this is more than sufficient.
I have quite a few people who asked about specific of condenser so I am going to use this thread to post it up.
Dimension is, 6.3 inches high, 6.75 inches wide, 2.4 inches deep. 3/8 tubing and I think 11FPI... to reduce air turbulance and make slower turning fan work fine with it.
Chilly1 should stock some... I am not sure how much he have in hand now but if he runs dry, I do have some in my hand to supplement for some quantity. Enjoy

Hey there bro...

I am happy to hear that you are satisfied with the coils - As I had always promissed you... You'll love them and their quality will be the best you have ever seen!

As you know - Anything you need in that regards just call/email....

Oh, and btw.... They are 12 FPI corrugated...

[jinu117]

Well I am semi idling in between getting some gases for cascade and few other projects in my hand... figured time to finally upgrade my rig from good old 2nd prototype to production one :P
No fancy mid wheel as I am not transporting it around really or shipping :P No automated power cut off from froster as I can always blame myself if I screw up :p

Better temp, bit cleaner now inside :P





You see what is installed and used 24x7 :P

[adamwinn]

Riveting the nuts on the condenser shroud looks awesome. Nice job-

[krullet]

nicely done man, really nice work..

[Fhqwhgads6680]

Wow jinu VERY nicely done...now thats quality work!.... I really want to do one of those myself, I LOVE those cases...

Also you have stock of those condensers? If you have some you are willing to sell could ya drop me a PM? thanks!

Keep up the awesome work bro!

Brandon J

[lawrywild]

WOW that thing is awesome!!



I want one! lol (i wish)

[Weee]

It looks very nice now! definitely like the new configuration =)

[Jack]

You see what is installed and used 24x7 :P

I've looked at the photo's several times, but I still don't see it?
Tell us!
The case is looking fantastic

[ProphetX]

I've looked at the photo's several times, but I still don't see it?
Tell us!
The case is looking fantastic

The pics of the first unit are pictures of my Vapo Li. The pics of the 2nd unit are of his personal newly updated system. These are pics of what it use to look like http://webpages.charter.net/jinwpark...ge/PrototypeC/

[tennvols_69]

jinu117 awesome looking unit there buddy. if you have any of those condensors or know where i can get some shoot me a pm if you dont mind. i need one for a upcoming project.

[VulgarHandle]

ordered 2 VapoLi one for friend

simply amazing work, can't wait, hopin to break some records before leaving Socket A, got a trick up my sleeve too

[Weee]

ordered 2 VapoLi one for friend

Good move!

I think you'll be pleased with Jinu's customer service =)

[Cornelious0_0]

Good move!

I think you'll be pleased with Jinu's customer service =)

Agreed...I haven't ordered from him, but he's a hell of a guy, and I'll back him up whenever I can.

[Apotheosis]

So fresh and so clean! Awesome work there Jinu!

[Ssilencer]

So fresh and so clean!

Is Jinu making tooth paste too?

Colgate, beware!!!!

[iboomalot]

whats loaded temps??

also how loud is the overall system when running and if you mounted an external 302 rad and put a pump on that flat spot infront of the 120mm fan
and water cooled the GPU ???

hummm

[Weee]

whats loaded temps??

also how loud is the overall system when running and if you mounted an external 302 rad and put a pump on that flat spot infront of the 120mm fan
and water cooled the GPU ???

hummm

It depends on the load, he tunes the system custom to whatever chip(type) you plan to use based on what he gets his hands on to experiment with. while playing games and also running folding on my 2nd core, I was always in the mid -40s (read from temp probe on Evap) using his unit.

[jinu117]

whats loaded temps??

also how loud is the overall system when running and if you mounted an external 302 rad and put a pump on that flat spot infront of the 120mm fan
and water cooled the GPU ???

hummm

External 302 rad? Pump on flat spot in front of 120mm fan? Can u get me some detail of what you are talking about? PM will do fine.

Sincerely, Jin

[jinu117]

Bit of departure from my usual stuff. SS in UFO case
Internals are not much differet from my typical lian-li. NF9FX, very short cap tubing on this one optimized for high v-core presler, Froster XE (ssilencer... hurry :P). Some case mod done are the rear hdd bay cut to accomodate compressor, Custom backplate made out of acrylic to cover rear PSU portion. Wiring job is done by customer... you wouldn't believe how much wires are in there in this one. Probably took him good few hours sorting it out. Considering this case's left could have another set of 5.25" instead of the 2 fans on left, this case could be ultimate SS in case setup for those who need LOT of drive spaces.
Froster display is behind the skull in 5.25" bay at bottom behind translucent black plexi... bit hard to see in this pic.







Froster temp display idle around -40c (1.625v lol), FULL 1.625v dual prime 5ghz presler -2 to 1c with ambient around 26c (froster around -35c). Bit stronger condenser fan can knock down temp a little but not needed really. This unit should handle load up to 1.7v on presler but I wouldn't recommend doing that for sake of CPU :P

[SrJabardo]

BEAUTIFULL!!!!!!!!!!!!!!!!!!!