It works ok with i955 ?
It works ok with i955 ?
My System
» ASUS P6T Deluxe V2 (CF w/0006 bios) | Core i7 930 3002A879 @ 4.20GHz (21x200) | Corsair Dominator DDR3 6GB TR3X6G1600C8D @ 1603MHz 8-8-8-21-1N
» ASUS ENGTX460 TOP 1GB @ 900/4000MHz | SB X-Fi Titanium PCI-E | C:\Intel SSD X25-M G2 80GB | D:\Samsung F3 HD103SJ 1TB | E:\Plextor PX-716SA
» Corsair HX620W Modular | CoolerMaster Stacker custom "All Black" | Samsung LED XL2370 23" Full HD
» WC 3/8": Apogee GTZ + BI GT Xtreme 240 + Koolance Nozzles + Station 600 + Silver KillCoil
..and if you change cas 3 to 4 on channel A,channel B don't change??
Mostly @ tRAS when i want to set both (checked) on 4 (from 8) and apply. when reopening the tweakers i see a on 4 and b still on 8, same with some other settings i hope this clear's the question
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Felix,
I was wondering if Memset is suppost to read MemSet 1.0 now as you posted? I downloaded the link but it doesn't add the 1.0...is that right
I have a 975 chipset and it does not add the 1.0. Anyone else notice this??
Last edited by Eastcoasthandle; 04-13-2006 at 04:02 PM.
[SIGPIC][/SIGPIC]
Waus-mod->I send you a private message.
jVIDIA-> it's work on 955 chipset.
Eastcoasthandle->I don't understand,if you download the link,it's 1.0 version,
for 975 or other...
Great ,the new version can work with my mobile 910GML chipset now but with a little problem...
I can change all the timing parameters except for tCL,which is the most important. Every time I change this parameter and click 'apply',the system just crash.Is there anyone using mobile chipset can change tCL parameter?
Same here.Originally Posted by sang
My System
» ASUS P6T Deluxe V2 (CF w/0006 bios) | Core i7 930 3002A879 @ 4.20GHz (21x200) | Corsair Dominator DDR3 6GB TR3X6G1600C8D @ 1603MHz 8-8-8-21-1N
» ASUS ENGTX460 TOP 1GB @ 900/4000MHz | SB X-Fi Titanium PCI-E | C:\Intel SSD X25-M G2 80GB | D:\Samsung F3 HD103SJ 1TB | E:\Plextor PX-716SA
» Corsair HX620W Modular | CoolerMaster Stacker custom "All Black" | Samsung LED XL2370 23" Full HD
» WC 3/8": Apogee GTZ + BI GT Xtreme 240 + Koolance Nozzles + Station 600 + Silver KillCoil
...I have no problem with Cas on 915 and 945 chipset!??
I see that..
I haven't tried 1.0 yet, but on my P5WD2 Prem, I can't change CAS in the app without an immediate lock-up too. I need to boot with whatever CAS I want and can then change everything else no problem.
Thank You M8!!!
I'm running a DFI 875P-T that refused post at anything over 255fsb with the 5/4 mem multy... now i raise the cpu v in bios boot @ 250 up it with systool
and loosen the mem up in windows... fully stable @ 274fsb...
i just wish the 266 mem multy worked with this crap board... = driving me nutz lol... Anyone know any tricks for this old mobo???
Ty m8 keep it up...
P.S. if you need a free web host for the program PM me...
very nice ,but there are some problems with 915p.I can't change Cas latency and Ras to Cas Delay the system just crash.
This is my result with the first release:
Last edited by Sav; 04-15-2006 at 10:53 PM.
...and you can change "Cas" and "Ras to Cas" with the first release??
i can't change it in both release.
...I send you a private message.
thanks, it even works on a dell 9400.
Dell XPS M1730 - X9000 @ 3400mhz-4096MB 667MHz DDR2 - M8800GTX SLI- 17"WUXGA+
EVGA E762 4Way SLI Classified - 980X @ 6Ghz LnČ 6GB Dominator - MSI 5870 Lightning
WWW.MADSHRIMPS.BE - Being Mad Doesn't Hertz You
felix.. tomarrow i will take a dump for u!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
good oneOriginally Posted by Waus-mod
hi Felix
when the new release???
I upgrade MemSet for 1.1 version:
http://rv.page.cegetel.net.perso.cegetel.net/MemSet.zip
Intel chipsets 845 & 855 are supported now.
For Cas on 9xx chipset,I made a little modification,but I think that
some motherboard (or some DDR2) don't support to adjust
Cas latency on the fly,because it's not any problem for others motherboard.
Last edited by FELIX; 04-25-2006 at 08:11 AM.
nice work
but it's not possible to change the cas latency on my motherboard
do you think it's a ram problem or matherboard??
Last edited by Sav; 04-25-2006 at 09:08 AM.
...not a "problem",but probably impossible to adjust it on your motherboard,
and I don't know why.
I can change the Cas without problem on a MSI 915GM-FR,
and it's practically the same.
ok but I can change the other timing....Originally Posted by FELIX
looks great.finally us intel peeps can tweak away like the amd fans.
slight problem for me though.i extracted the files to c\windows.right click the setup inf file click install,it does its thing and error pops up saying installation failed??.
any help on this appreciated
i have an abit ic7g board-875p chipset
thanks
Last edited by jtf2; 04-25-2006 at 06:21 PM.
...are you tried to extract files in other direction?
Bookmarks