New Memory Tweaker for Intel Chipsets

[zhufigo]

oops，it doesn't work for my celeron m 370+910GML chipset.

[FELIX]

I update MemSet to 1.0 version.

-Add Dram Idle timer for 8xx chipsets.(Come from P4C800)
-Add Read to Precharge on 9xx chipsets.(especially for ddr2 667 or higher)
-Add support for 915 and 945 Mobile chipsets.
-Modify interface when you run in dual channel on 9xx chipsets:I add a checkbox between channel A and B,
(automaticaly checked in dual channel interleaved).
not necessary now to change timings on channel A and B ,one only have to change A or B.
You can also change timings A and B individualy if you want.
-If you run in single channel,only one channel appear.

http://rv.page.cegetel.net.perso.cegetel.net/MemSet.zip

There is,reporte me a bug please...

[Johnny Bravo]

happy to try FELIX, glad to see the addition of the DRAM idle timer to the mix

[webwilli]

Hi FELIX,

very nice and useful software. i like it.

i have an asus p5wd2 prem. and in the bios i can set DRAM Write Recovery Time=tWR, but not in memset. Can you integrate it?

thx for your work

greets from germany

[FELIX]

Sorry,not possible to add Write recovery time in the soft...I don't find it.

[Waus-mod]

The new version is bugged. when setting mem a it wont change mem b, like i set cas3 to 4 a stays 3 and other 4 (as example)

[FELIX]

is your case between Channel A and B checked?

[Waus-mod]

yes its checked. @ intel i975Xa (aopen)

[jVIDIA]

It works ok with i955 ?

[FELIX]

..and if you change cas 3 to 4 on channel A,channel B don't change??

[Waus-mod]

Mostly @ tRAS when i want to set both (checked) on 4 (from 8) and apply. when reopening the tweakers i see a on 4 and b still on 8, same with some other settings i hope this clear's the question

[Eastcoasthandle]

Felix,

I was wondering if Memset is suppost to read MemSet 1.0 now as you posted? I downloaded the link but it doesn't add the 1.0...is that right
I have a 975 chipset and it does not add the 1.0. Anyone else notice this??

[FELIX]

Waus-mod->I send you a private message.

jVIDIA-> it's work on 955 chipset.

Eastcoasthandle->I don't understand,if you download the link,it's 1.0 version,
for 975 or other...

[zhufigo]

Great ,the new version can work with my mobile 910GML chipset now but with a little problem...
I can change all the timing parameters except for tCL,which is the most important. Every time I change this parameter and click 'apply',the system just crash.Is there anyone using mobile chipset can change tCL parameter?

[sang]

yeah,same crash thing here on changing CAS parameter on p5wd2-e

tried with spd timings on/off in bios,no succes

[jVIDIA]

yeah,same crash thing here on changing CAS parameter on p5wd2-e

tried with spd timings on/off in bios,no succes

Same here.

[FELIX]

...I have no problem with Cas on 915 and 945 chipset!??
I see that..

[boostedevo]

I haven't tried 1.0 yet, but on my P5WD2 Prem, I can't change CAS in the app without an immediate lock-up too. I need to boot with whatever CAS I want and can then change everything else no problem.

[zillaoc]

Thank You M8!!!

I'm running a DFI 875P-T that refused post at anything over 255fsb with the 5/4 mem multy... now i raise the cpu v in bios boot @ 250 up it with systool
and loosen the mem up in windows... fully stable @ 274fsb...

i just wish the 266 mem multy worked with this crap board... = driving me nutz lol... Anyone know any tricks for this old mobo???

Ty m8 keep it up...

P.S. if you need a free web host for the program PM me...

[Sav]

very nice ,but there are some problems with 915p.I can't change Cas latency and Ras to Cas Delay the system just crash.
This is my result with the first release:

[FELIX]

...and you can change "Cas" and "Ras to Cas" with the first release??

[Sav]

i can't change it in both release.

[FELIX]

...I send you a private message.

[Gamer]

thanks, it even works on a dell 9400.

[Waus-mod]

felix.. tomarrow i will take a dump for u!