This was one of the first Vandi specials but I went thru a few bad mb's before I could really tet it. So far on a TT BT this is my best 1m time. Ram needs to be tweaked or put back in 4000vx. I wish more dividers worked.
This was one of the first Vandi specials but I went thru a few bad mb's before I could really tet it. So far on a TT BT this is my best 1m time. Ram needs to be tweaked or put back in 4000vx. I wish more dividers worked.
Last edited by dogsx2; 10-22-2005 at 07:50 AM.
Nice chipwhats the full stepping???
The whole world's hip and thats not cool !
Rip Van Hippy
Doesn't expecting the unexpected make the unexpected the expected ?
Light travels faster than sound. This is why some people appear bright until you hear them speak
-------------------------
Nice, man!.
On air too, congrat's!
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
CABNE 0530APMW - low batch number
Thanks, I don't think the 144's get looked at enough.
dam my Opteron CABYE 0536 GPMW needs 1.68v on 28-30C ambient room water temp for 3017mhz
---
There are opteron`s 146 "Venus" and "Sledgehammer", what is the best?
These are Venus socket 939. The sh's are socket 940.Originally Posted by Txaime
Very nice!
Sell it me !
I offer 200 $
I'll buy one like this for that $$, you sell me one.Sell it me !
I offer 200 $
nice oc, 3ghz @ 1.5v on air
regards
Here is my 144 CABYE 0536 GPMW with my good old Infineon 6A
I know the vcore isnt the best but i have only an arctic cooling freezer 64. With a better cooler i could clock higher.
And here is the Limit i reached.
http://valid.x86-secret.com/show_oc?id=44956
Here is my 144 CABYE 0536 GPMW with my good old Infineon 6A
I know the vcore isnt the best but i have only an arctic cooling freezer 64. With a better cooler i could clock higher.
And here is the Limit i reached.
http://valid.x86-secret.com/show_oc?id=44956
Can you stable in 2.7G 1.4V? 32M or Prime 95
Never tried 32m or prime 95 at 2.7G 1.4. Here's something I tried on a bad mb:
http://www.xtremesystems.org/forums/...36#post1064236
Amazing chip... I think phase change users would run out of FSB before they'd run out of CPU!
C
Can ya test it with prime? I'm interested in how my chip stacks up as a 24/7 chip against a top notch "N" (I've got a "G").
Only the stupidest humans believe that the dogma of relative filth is a defense.
I don't like prime or do it that much but just for you I did as much as I can stand. I just used the MHz as in the OCCT test in the previous post and bumped the Vcore a little. I was not going to try and find top Mhz with prime. If you would have wanted top 32m, I would have put some effort into it, sorry. I do think it will prime higher with more effort. Here's a little something to compare with.
Indeed, low multiplier is a big disadvantage. Had this problem when tested my 3000 under DI. If someone would find a way to unlock multi but that is very unlikely and I am dreaming probably
...
Maybe not on the new DFI board dogsx2 is currently using. I think he flashed a 370+HTT to me on another thread. I'm thinking at 380 he would start to run into the 32M stable limit of the CPU. Can someone send him a strong single stage so we can find out?
Sourcing parts for a mildly over clocked abacus.
Maybe not on the new DFI board dogsx2 is currently using. I think he flashed a 370+HTT to me on another thread. I'm thinking at 380 he would start to run into the 32M stable limit of the CPU. Can someone send him a strong single stage so we can find out?
I'll go easy on it, pm me for shipping instructions.
The good cpu's are all going to be in that 3400+- range no matter what the X factor I think. Tweaking sure plays a huge part in max MHz.Maybe not on the new DFI board dogsx2 is currently using. I think he flashed a 370+HTT to me on another thread. I'm thinking at 380 he would start to run into the 32M stable limit of the CPU. Can someone send him a strong single stage so we can find out?
I would like to see you with the same mb and memory try all three of you optys and see how much the X factor makes.
Nice CPU u got there dogsx2.
I was 2 weeks too late and could only grab a cabye. I never overclocked a A64 cpu, so I have a few questions:
Are there any disadvantages using memory dividers?
How does a new A64 Cpu look like? Id the ihs all nice and shiney or does it look used? I somehow have the feeling that my opteron was running before, although its a boxed version :/ I hope it has only been tested by AMD and not from the shop I orderd it from. Otherwise I guess it wont oc that good ;(
Are there huge differences in max htt boards can handle? Or is the cpu maxed out before the board does?
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
Use any divider that works, there is no disadvantage. Was your box still sealed? If the box was sealed then I'd say it was not used. Yes, there are big differences in mb's. My rma'ed DFI would max out at about 342. This one I'm on now does 402 HTT.
I hope your oc goes well.
where did you buy it from
I WANT ONE
I bought some ram from Major and thought I'd try it out. He said it would run 260@3.5v and he was right. Did manage to get a little more out of it. This is the best cpu I've ever owned.
Posting Permissions
Reply With Quote
Bookmarks