hey guys, i could use a few tips on setting up my system with this new gskill ram. i have an opty 144 running at 300x9 on my a8n32. what i really need help with is my memory settings, i set up some of the more basic timings, but im lost on some of the advanced ones, and im wondering if anyone out there is running the 2gbhz with this board. i am on bios 1009. here is the settings that i changed, the rest are on default. at these settings and a 166 divider, everything is stable, but im having problems getting this stuff much higher than stock speeds. thanks for any tips in advance.
Memclock mode Limit
Memclock value 200
Timing mode Manual
CAS Latency 3
TRAS 10
TRP 4
TRCD 4
TRRD 4T
TRC auto
TRFC auto
TRWT auto
MCT Extra timing mode AUTO
TREF ?
TWCL ?
R/W Queue Bypass ?
Bypass Max ?
Idle cycle limit ?
Dynamic idle counter Enabled
DDR driving strength Normal
Enable 32-byte Granularity Disabled
TWR ?
DDR input strobe skew Disabled
DDR Data driving strength ?
User config mode Manual
Read Preamble ?
Asyc Latency ?
Bank Interleaving Auto
Burst length 4 beats
Hardware memory hole Disabled
Bookmarks