Eva2000, how have your overall results been using burn in?
Eva2000, how have your overall results been using burn in?
has helped with clocks and voltages below my max oc but my max oc is still the same for my 2x opteron 170,
max benchable
0544XPMW = 2800mhz 1.552v
0546SPMW = 2750mhz 1.552v
max dual prime is 50-75mhz below the max benchable
i should have better cooling after Xmas which may or may not help
---
okay I've read enough... using cpuburn to strengthen my Core 0
Thanks....
*Edit
Im burning in my opt 175.
Last edited by keichan82; 12-21-2005 at 10:22 PM.
can someone give me a link to cpu burn k7 please?
Thanks
Opteron 170 @ 2.4ghz
2 GB Geil @ 2.5,3,3,7
Epox 9NPA Ultra
7800 GT
Audigy 2 ZS
Raptor/300 gig Maxtor
Akasa Eclipse 62/Antec Neo
its in this exact thread look aroundOriginally Posted by eclipse_me
ABIT IP35 PRO
Intel Q6600 GO L737B @ 3.6ghz
G. Skill DDR2 1000 - 4 gigs
150 gig Raptor (OS)
300 gig Seagate (Storage) 500 gig Freeagent (storage)
EVGA 8800 Ultra
Ultra X3 1000 Watt
X-fi Fatal1ty FPS
Watercooled: D-Tek Fuzion MCP655 Micro Res PA 120.3
EX 8800 Full Cover Block
Dell Ultra Sharp 24" LCD
found it thanks...
Its late I'm tired.
Anyway quick question :
have dual core opty 170,core 1 is the weaker.
@1.55 vcore core 0 is fine at 2.6ghz core 1 fails prime after 1min 30 secs.
so do i run cpu burn on the bad core at this voltage?
eg one instance of cpuburn on core 1(weaker) at 1.55vcore?
Thanks
Just want to get it right.
Opteron 170 @ 2.4ghz
2 GB Geil @ 2.5,3,3,7
Epox 9NPA Ultra
7800 GT
Audigy 2 ZS
Raptor/300 gig Maxtor
Akasa Eclipse 62/Antec Neo
Thats what I gather from this thread.. You want to get it where the bad core fails prime in about 1-2 hours and then with those settings burn-in the bad core with CPUBurn-in..Originally Posted by eclipse_me
Im doing this on my new x2 3800.. Hopefully it will help my core 0..
my 3800+ was previously stable with about 1.475v (BIOS) at 2600mhz, after a bit of burn in, it's going strong at 1.45v.
So it sure seems to work, aiming to get it even lower.
Conroe E6300 ES
2x1gb Ballistix PC8000
Asus P5W DH Deluxe (1705)
Manli Geforce 7950GT 512mb
Hiper Type-R 480w
Samsung SP250
"What did the quantam duck say?" "Quark Quark"
Hey, I know this is an old thread, but I have a question about cpu burn-in. When I run cpu burn-in k7, it brings the cpu to its knees. Running two instances (1 per core) makes my computer run so slow that it takes 15 minutes to load in the desktop from a screen saver. Nothing like Prime95. I could play games running two instances of Prime95. Does this happen to you guys too?
set once instance to high priority and other instance to normal priority so you can do stuff on your pcOriginally Posted by TechNooB
---
My comp stutters a bit with just one instance of cpu burn-in. Like, it'll be smooth for 10 seconds, freeze for 10, smooth for 10, freeze etc.
I just started prime95 for core1 (good core), had the affinity set to 1 in both prime95 and task manager. ai booster reports that core1is at 100%, but core2is somehow at %50 =(
I'm going to give this a shot tonight because it seems to work. I'll post back soon
Last edited by rick_fx; 01-07-2006 at 02:20 PM.
Wolfdale e8400es @4.5Ghz / Ultra-120 Extreme
2GB Ballistix @ 589Mhz 4-4-4-x @ 2.5V - SPI 32M
*** Motherboards tested: DFI Blood Iron (current), Asus P5K3-dlx, DFI P965-S, P5B-Dlx, DFI RD600, Bad Axe 2, EVGA 680i, DS3 and P5W DH ***
Fan modded Zippy 850W, 500GB 7200.11 and EVGA 8800GTX @678/1062
hmm after continous burn-in I seem to be approaching 2.9ghz at 1.56volts. Before I can't even stay stable at 2.8. Burn in 1htt at a time using cpuburn k7.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
weird .. in my ask manager it says cpu usage is 50% across both cores .. but i set the affinity to only core 0 to burn in .. in the graph on the side though it has core 0 pinned to the top .. and core 1 just doing its normal thing .. its weird ..
Intel Core2Quad Q6600 @ 3.6 | Thermalright Ultra Extreme
EVGA 780i SLi
8gb ADATA 4x2gb DDR2 800
Evga 260gtx core 216
Western Digital 300gb Raptor x 2 | Seagate 7200.11 1.5tb x 2
Klipsch 5.1 Ultra Promedia
Corsair 1000hx
Lian Li TYR PC-X500
Dell 3007fpw 30" Widescreen LCD
Originally Posted by situman
what stepping is your opt 170,,, that is really nice numbers for an opt 170,,, I cant get my core 0 stable for anything even after many nights burning it in,,,
ABIT IP35 PRO
Intel Q6600 GO L737B @ 3.6ghz
G. Skill DDR2 1000 - 4 gigs
150 gig Raptor (OS)
300 gig Seagate (Storage) 500 gig Freeagent (storage)
EVGA 8800 Ultra
Ultra X3 1000 Watt
X-fi Fatal1ty FPS
Watercooled: D-Tek Fuzion MCP655 Micro Res PA 120.3
EX 8800 Full Cover Block
Dell Ultra Sharp 24" LCD
CCBWE 0530 TPMW You have to do it slowly especially when you are at the initial limit.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
Originally Posted by situman
ahh you got the golden 0530 stepping nice find,,,, so if lets say I have core 0 that fails Prime at 2.7 at like 20 secs or 1 min,,, but core 1 will go for 10 hours,,,, do I burn in at 2.7 or lower or higher?
ABIT IP35 PRO
Intel Q6600 GO L737B @ 3.6ghz
G. Skill DDR2 1000 - 4 gigs
150 gig Raptor (OS)
300 gig Seagate (Storage) 500 gig Freeagent (storage)
EVGA 8800 Ultra
Ultra X3 1000 Watt
X-fi Fatal1ty FPS
Watercooled: D-Tek Fuzion MCP655 Micro Res PA 120.3
EX 8800 Full Cover Block
Dell Ultra Sharp 24" LCD
demonbane23, i'd try lower htt a little bit and burn in k7, @2.7 may work for core 0 but it may take longer burn in before it work.
you mean like start at like 2.6 burn in where im already stable>?? or do you mean lower HTT mutli like drop from 3x down to 2x,,, not sure if i follow youOriginally Posted by nop
ABIT IP35 PRO
Intel Q6600 GO L737B @ 3.6ghz
G. Skill DDR2 1000 - 4 gigs
150 gig Raptor (OS)
300 gig Seagate (Storage) 500 gig Freeagent (storage)
EVGA 8800 Ultra
Ultra X3 1000 Watt
X-fi Fatal1ty FPS
Watercooled: D-Tek Fuzion MCP655 Micro Res PA 120.3
EX 8800 Full Cover Block
Dell Ultra Sharp 24" LCD
sorry, i mean Ghz.Originally Posted by demonbane23
both cores're stable@2.6 ? If they are, then try start@2.65@the same vcore of 2.6 and let see if it works. try a little step at a time. don't rush.
got ya ill leave it burning in tonight give it a try,,,Originally Posted by nop
ABIT IP35 PRO
Intel Q6600 GO L737B @ 3.6ghz
G. Skill DDR2 1000 - 4 gigs
150 gig Raptor (OS)
300 gig Seagate (Storage) 500 gig Freeagent (storage)
EVGA 8800 Ultra
Ultra X3 1000 Watt
X-fi Fatal1ty FPS
Watercooled: D-Tek Fuzion MCP655 Micro Res PA 120.3
EX 8800 Full Cover Block
Dell Ultra Sharp 24" LCD
Good luck demonbane23. Hope it'll work for you
OK you guys got me hooked My 3800+ core1 is a little lazy, this is worth a shot to see if I cant get the lazy boy to work
Question, is every one wateing the 6 to 8 hours after a nights run? Or just shutting down untill every thing cools and try results?
Bookmarks