Ram divider @ 7/10
Able to do basic stuffs but not Prime
Ram divider @ 7/10
Able to do basic stuffs but not Prime
Last edited by dfx; 10-31-2005 at 09:42 PM.
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
nice
what cooling and what's the ram running at? and is it stable at say 50mhz less?
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
very nice job! what is your cooling?
On a single phase (Vapo LS)Originally Posted by biohead
As for ram. its running @ 7/10 (DDR280) divider
Guess there's bug with CPUz
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D
OCZ Powerstream 520W
Cooler Master Hyper 6 / Vapochill LS <----
On a single phase (Vapo LS)Originally Posted by njkid32
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Thanks broOriginally Posted by eR1k
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Nice. Looks like i might have to jump a CABYE soon. It is very hard to find CABNE, and i am afraid the overall quality of opterons might drop a bit soon.
And 3.2 ghz 24/7 would not be too bad
Here's what it can do on AIR
Ambient @ 29c
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Holy dude! These 0540s looking better and better... what's your highest 24/7 settings!?
Stationary:
MB1 DFI LP NF4 Ultra-D rev. R.A02 BIOS 0623-2
CPU 3000+ Winnie CBBHD 0449 GPGW @ 2.745ghz 1.45V 305*9 24/7
P/C Vapochill Lightspeed
RAM1 2 x 512MB GSkill PC4800LA TCCD 519 @ 305 2.5-4-4-8 1T 2.9V
RAM2 2 x 512MB TwinMos SP PC433 BH-5 @ 240 2-2-2-5 1T 3.4V
GPU Connect3D X850XT PE @ 570-1210 / stock voltage
PSU OCZ PStream 600W
HDD Maxtor DM10 300GB SATA 16MB
Mobile:
BRD Toshiba
CPU Pentium M 1.6 Ghz
RAM 512MB DDR
GPU ATI Radeon Mobility 9700 64MB
HDD IDE 40GB 5400 rpm
24 x 7 i'm on air with Cooler Master Hyper 6Originally Posted by Oden
Clocked @ 3GHz (1.425 x 104%) Prime Stable
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
you´ve the same problem with cpu-z than me ^^. my bh5 is running to @ 380 mhz ^^
I love Extreme Overclocking
On 7/10 divider?Originally Posted by Xtasy
Mine happen only when i run 7/10
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Ok, but what I really meant were, how high can you go with your single-stage, prime95-stable?
Stationary:
MB1 DFI LP NF4 Ultra-D rev. R.A02 BIOS 0623-2
CPU 3000+ Winnie CBBHD 0449 GPGW @ 2.745ghz 1.45V 305*9 24/7
P/C Vapochill Lightspeed
RAM1 2 x 512MB GSkill PC4800LA TCCD 519 @ 305 2.5-4-4-8 1T 2.9V
RAM2 2 x 512MB TwinMos SP PC433 BH-5 @ 240 2-2-2-5 1T 3.4V
GPU Connect3D X850XT PE @ 570-1210 / stock voltage
PSU OCZ PStream 600W
HDD Maxtor DM10 300GB SATA 16MB
Mobile:
BRD Toshiba
CPU Pentium M 1.6 Ghz
RAM 512MB DDR
GPU ATI Radeon Mobility 9700 64MB
HDD IDE 40GB 5400 rpm
That's really nice man, I thought there won't come a good S939 Opteron after de CABNE 0530 APMW, but i was wrong
What are you're temps and is your IHS still on or not? Maybe try DI some time
Epox 9NPA+ Ultra - Opteron 146 0530 APMW
Infineon BH-6 2x256mb - Tagan 480W-U22
Gainward 6600GT Vmodded - Kingston HyperX BH-5 2x256mb
Infineon BH-6 280MHz 2-2-2-5 @ 3,77V - 3602MHz - PhCh mem Project
You got pretty good result here, some opty can take you under 23 sec I bet.Originally Posted by dfx
where can i buy THAT cpu!!!
Intel Conroe E6400 - Intel P965 - 4GB DDR2 - 8800GTX - 320GB Western Digital - Dell 2007WFP - Windows Vista Ultimate
What's your temps with the LS btw? Seen some results of +10 degrees C, with a single-stage...
Stationary:
MB1 DFI LP NF4 Ultra-D rev. R.A02 BIOS 0623-2
CPU 3000+ Winnie CBBHD 0449 GPGW @ 2.745ghz 1.45V 305*9 24/7
P/C Vapochill Lightspeed
RAM1 2 x 512MB GSkill PC4800LA TCCD 519 @ 305 2.5-4-4-8 1T 2.9V
RAM2 2 x 512MB TwinMos SP PC433 BH-5 @ 240 2-2-2-5 1T 3.4V
GPU Connect3D X850XT PE @ 570-1210 / stock voltage
PSU OCZ PStream 600W
HDD Maxtor DM10 300GB SATA 16MB
Mobile:
BRD Toshiba
CPU Pentium M 1.6 Ghz
RAM 512MB DDR
GPU ATI Radeon Mobility 9700 64MB
HDD IDE 40GB 5400 rpm
Evap @ -53cOriginally Posted by Oden
Full load temp for cpu @ -9c
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Got it from my local hardware store (Singapore)Originally Posted by mag|c
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Yep.. I agreedOriginally Posted by EclectiK
I'm going to try break into 22s coming weekend since mine can boot into 3.6GHz but arent able to capture screenie
So i buffer i still got room for about 50MHz ~ 80MHz to play with
Hope this allow me to breal into 22s
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Havent tried priming this chip on Ph/COriginally Posted by Oden
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
My error guys
Mine is a CABYE 0540 FPMW
Not FPBW
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
ah ha so it ain't a FPBW!
---
Yep very sorry broOriginally Posted by eva2000
Just realise when i take a 2nd look
X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D / DFI NF4 Ultra D
Antec True Control II 550W / Silverstone Zeus 650W
Sapphire GTO2 / Leadtek 7800GTX
Zalman CNPS9500 LED / Vapochill LS
Zalman VF-700 CU LED / Swiftech MCW50
Bookmarks