hmmm....on th expert mobo i couldn't put it @ 300htt without a zillion of memtest errors. Will try on ulral-d later then
hmmm....on th expert mobo i couldn't put it @ 300htt without a zillion of memtest errors. Will try on ulral-d later then
remember, gotta burn 'em in though ( on my utt/ch-5 took me almost a month to get 1.5-2-2-8stable as opposed to 2.5-3-2-9 stable)
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
same thing in this review ... funny you should mention thatOriginally Posted by Onepagebook
http://www.sgoverclockers.com/module...t&id=42&page=2
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
Can't find this stuff anywhere
Gigabyte H55N-USB3 (F5)
Intel Core i5 750 @ 3.80GHz
2x4GB G.Skill RipjawsX @ DDR3-1448 (8-8-8-25)
MSI R6950 Twin Frozr II @ 880/1375
1 x Samsung 250GB SATA HD
1 x Samsung 500GB SATA HD
Silverstone SG05 Case w/ ST45SF 450w PSU
have to buy it "USED".
ASUS P5B-Deluxe
C2D E6600 @ 3.525g
G.Skill 2x1gb PC6400 HZ's
2x Seagate 400gb SATAII HDD's
PNY 7900GS @ 450/1320mhz
Lite-On SATA and IDE DVD-RW
OCZ GameXTreme 600w PSU
D-Tek FuZion "bowed"
LAING D5
Thermochill PA120.2
2x Scythe SFF-21F's
mine can hit 300 @ 2.5-4-3-5, 2.72vdimm on DFI Lanparty UT nF4 SLI-DR eXpert...
AMD64 Opteron 144 (CACJE 0546 BPAW) @ 2.7GHz || Gskill 1GBFX @ DDR600 (2.5-4-3-5, 2.72vdimm) || DFI Lanparty UT nF4 SLI-DR eXpert (E704-2BT) || Thermaltake BigWater SE || Enermax Iron FMA 535w || Cooler Master Stacker STC-T01
@I found nemo : burn-in tccd ? is this possible like utt ch5/bh5 ?
mine can do 290 2.5-3-3-7 1T 2.72v easily(with ultra-d first try was 275), dont try higher yet(I will test it later with expert),
now still searching with geil one-s 309 2.5-4-3-7 1T 2.77v(wont do 2.5-3-3-7, geil tccd 524)
DFI nF4 Ultra-D R.AD0 ~ Bios 510-2FIX | DFI nF4 Expert R.A02 ~ Bios 704-2BT
Opteron 148 + TR XP-120 ~ 2900MHz@1.52v | Venice 3200+ ~ 2500MHz@1.376v
GSkill GBFX 2x512MB trcd=3 trcd=4
GSkill GBGH 2x512MB 244MHz 2-2-2-5 1T@3.22v (windows)
GeIL ONE-S TCCD 2x512MB ~ 264MHz 2.5-3-3-7@2.54v (windows) ~ 303MHz 2.5-4-3-7@2.76v (windows)
GeIL ONE-S BH-5 2x512MB ~ 244MHz 2-2-2-5@3.22v (windows)
Leadtek PX6600GT TDH 128MB | ViewSonic VX724 | 1x74GB WD Raptor SATA | 2x250GB Hitachi Desktar T7K250 SATA II - Raid0 | TDK CyClone CD-R/RW DVD Combo 52/32/52/16 | BenQ 1640 | CM Stacker STC-T01-UWK | Enermax Coolergiant EG-701AX-VH | WindowsXP SP2
Why is the initial post blanked out?
Cause OPB moved to the competition
Anyway, the FX series is out of production, i don't think this is so important anymore.
Well, competition or not, since the post was made before he defected, I don't see how that invalides his previous findings.
I think XS should maybe be above corporate identity battles in clear cases like these.
Last edited by uOpt; 03-08-2006 at 11:49 AM.
I agree, I hope that competition not make confusing XS memberOriginally Posted by uOpt
DFI nF4 Ultra-D R.AD0 ~ Bios 510-2FIX | DFI nF4 Expert R.A02 ~ Bios 704-2BT
Opteron 148 + TR XP-120 ~ 2900MHz@1.52v | Venice 3200+ ~ 2500MHz@1.376v
GSkill GBFX 2x512MB trcd=3 trcd=4
GSkill GBGH 2x512MB 244MHz 2-2-2-5 1T@3.22v (windows)
GeIL ONE-S TCCD 2x512MB ~ 264MHz 2.5-3-3-7@2.54v (windows) ~ 303MHz 2.5-4-3-7@2.76v (windows)
GeIL ONE-S BH-5 2x512MB ~ 244MHz 2-2-2-5@3.22v (windows)
Leadtek PX6600GT TDH 128MB | ViewSonic VX724 | 1x74GB WD Raptor SATA | 2x250GB Hitachi Desktar T7K250 SATA II - Raid0 | TDK CyClone CD-R/RW DVD Combo 52/32/52/16 | BenQ 1640 | CM Stacker STC-T01-UWK | Enermax Coolergiant EG-701AX-VH | WindowsXP SP2
i love my fx series
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
I have just got myself a pair of F1-3200DSU2 512LA. Amazing sticks of RAM, can do DDR600 2.5-4-4-8 at stock voltage with no problem at all (if fact its not even overclocked yet).
How does those sticks compare to mine?
Last edited by hixie; 04-17-2006 at 03:01 PM.
but I think gskill gbfx still the best for price/performanceOriginally Posted by hixie
DFI nF4 Ultra-D R.AD0 ~ Bios 510-2FIX | DFI nF4 Expert R.A02 ~ Bios 704-2BT
Opteron 148 + TR XP-120 ~ 2900MHz@1.52v | Venice 3200+ ~ 2500MHz@1.376v
GSkill GBFX 2x512MB trcd=3 trcd=4
GSkill GBGH 2x512MB 244MHz 2-2-2-5 1T@3.22v (windows)
GeIL ONE-S TCCD 2x512MB ~ 264MHz 2.5-3-3-7@2.54v (windows) ~ 303MHz 2.5-4-3-7@2.76v (windows)
GeIL ONE-S BH-5 2x512MB ~ 244MHz 2-2-2-5@3.22v (windows)
Leadtek PX6600GT TDH 128MB | ViewSonic VX724 | 1x74GB WD Raptor SATA | 2x250GB Hitachi Desktar T7K250 SATA II - Raid0 | TDK CyClone CD-R/RW DVD Combo 52/32/52/16 | BenQ 1640 | CM Stacker STC-T01-UWK | Enermax Coolergiant EG-701AX-VH | WindowsXP SP2
meh, in reality, anything over $100 per gb isn't good at all for price/performanceOriginally Posted by zungkono
Got a fan over those memory sticks? No? Well get to it before you kill them
Mine cost $680 (Hong Kong dollars) which is quite cheapOriginally Posted by zungkono
yes quite cheap compared with gskill LA,LE,FF or Geil One-sOriginally Posted by hixie
mine got 290@2.5-3-3-7 2.7v and 316@2.5-4-3-7 2.8v
Last edited by zungkono; 04-17-2006 at 10:58 PM.
DFI nF4 Ultra-D R.AD0 ~ Bios 510-2FIX | DFI nF4 Expert R.A02 ~ Bios 704-2BT
Opteron 148 + TR XP-120 ~ 2900MHz@1.52v | Venice 3200+ ~ 2500MHz@1.376v
GSkill GBFX 2x512MB trcd=3 trcd=4
GSkill GBGH 2x512MB 244MHz 2-2-2-5 1T@3.22v (windows)
GeIL ONE-S TCCD 2x512MB ~ 264MHz 2.5-3-3-7@2.54v (windows) ~ 303MHz 2.5-4-3-7@2.76v (windows)
GeIL ONE-S BH-5 2x512MB ~ 244MHz 2-2-2-5@3.22v (windows)
Leadtek PX6600GT TDH 128MB | ViewSonic VX724 | 1x74GB WD Raptor SATA | 2x250GB Hitachi Desktar T7K250 SATA II - Raid0 | TDK CyClone CD-R/RW DVD Combo 52/32/52/16 | BenQ 1640 | CM Stacker STC-T01-UWK | Enermax Coolergiant EG-701AX-VH | WindowsXP SP2
What was the OP's result? I don't see it.
Anyhow, if you haven't gotten your hands on a pair of TCCD, this is the right time since all the manufacturers are trying to dump DDR DIMMs. I myself got a pair of OCZ PC4200 sticks and they do 300MHz @2.5-3-3-6, and past that 2.5-4-3-7. (didn't test how far it'd go) All this at 2.70~2.75V.
I don't check my PMs very often.
Here are a couple screenshots for your viewing pleasure. It was my first TCCD kit and the things clock like there is no tomorrow, so I thought all TCCDs are like that. Mind you, but the clock itself won't make up for timing-loving K8 CPUs. (sure there is a turning point)
Here are OCZ PC4200 Platinum 1G (512MB x 2) which I just picked up for ~$120 after MIR.
DDR620 @2.5-4-3-7
DDR600 @2.5-3-3-6
And for comparison's sake, this shot is from OCZ PC3200 Titanium 1G x 2
DDR500 @2.5-3-2-6
The thing is, those TCCD sticks were much easier to deal with. Like I said, all DDR makers are trying to dump their inventory right now so if you've been thinking of them, this is the right time. And until Conroe arrives, do you honestly think DDR2 533/667/800 can make up for the speed shown above? I've seen some reviews here and there (about AM2), but they're comparing DDR400 (2-2-2-5, yeah big deal) with DDR2 800. Don't they know most people already running DDR500~600 speed in their rigs? Why do they turn blind on reality?
Sure DDR2 800 might be comparable to DDR400, but the truth is, nobody runs DDR400 this day and night.
Sorry about off-topic. Dunno how it went that way..
I don't check my PMs very often.
Bookmarks