OCZ PC4000 EB Platinum.....Initial Testing

[dnottis]

We posted our review, unfortunately with 2 chips and trying different settings I could not break 263 Mhz with Sandy core and 268 with venice.

Overall increased performance with tighter timings rocked - we can run 250 2.5-3-2-7.

http://www.3dxtreme.net/index.php

[Nightprowler_77]

Just recived my pair of OCZ EB replasing my bad stick of tracers. Right now I`m running a burn in at 3-3-2-7, 255 HTT.

Looking forward to test them this weekend

[Gaspar]

For the 5th+ time from me alone.....these are Infineon CE-6.

Im just curiouse if you know this as a fact or just pure speculation?
Ps my Pats are still screaming along no hiccups too

[Mcklain]

Well finished some initial testing.

24hrs dual prime stable at 260mhz at 3-3-2-7 with 2.7

I also passed 100 loops of 3dmark 2003 game tests without any troubles.

I will try cas 2.5 but doubt it will work.

Anyways, awsome ram!!

Thanks again OCZ for a great product!!

[rupbert]

I hope it isn't stated in this thread, but what is the part code for this ram please?

So I know what I am looking for

[RyderOCZ]

I hope it isn't stated in this thread, but what is the part code for this ram please?

So I know what I am looking for

OCZ5002048EBPE-K

[FACTION95]

I'm still waiting to get my EB sticks. UPS are a bunch of morons.

[rupbert]

OCZ5002048EBPE-K

Thx

[arctic-k20]

ttt - looking for more results!!!

[Haltech]

Well i ordered some of this good stuff for my X2 3800+ as well. Picked it up at monarch for $332 shipped. Ill post my results when i get em.

[JCGhz]

Well i ordered some of this good stuff for my X2 3800+ as well. Picked it up at monarch for $332 shipped. Ill post my results when i get em.

I plan on doing the same.. monarch will get em to you faster then atacom will...

[FACTION95]

UPS guy just now delivered my sticks. They got left at the UPS facility. Now to see what these babies will do.

[JCGhz]

UPS guy just now delivered my sticks. They got left at the UPS facility. Now to see what these babies will do.

Well? How did they do?

[Tibu]

Can anyone forget about Cas3 for one bench session and see how far they'll go at cas 2.5?

[Mikesta]

Can anyone forget about Cas3 for one bench session and see how far they'll go at cas 2.5?

HERE HERE!

[RyderOCZ]

Tibu - Mikesta,

I did this....Post #28 on Page 2 of this very thread.... 2.5-3-2-0 at 255....highest clock and tightest I could go

[Entropy1982]

Tibu - Mikesta,

I did this....Post #28 on Page 2 of this very thread.... 2.5-3-2-0 at 255....highest clock and tightest I could go

that "0" confuses me... how is that even possible?

[RyderOCZ]

that "0" confuses me... how is that even possible?

I find that it is no different than 5....just looks good on paper
Probably doesn't exist except in the bios of the DFI. I haven't fully tested it, and it would probably be CPU dependant as to its performance benefit.

[Entropy1982]

I find that it is no different than 5....just looks good on paper
Probably doesn't exist except in the bios of the DFI. I haven't fully tested it, and it would probably be CPU dependant as to its performance benefit.

Cool, thanks... I just got my rig hooked up today... 4000eb coming today.... my doorman probably already has it... just have to hook it up. Will probably OC tonight/tomorrow ... hopefully you guys will be able to help.

btw ryder... you rock =)

[arctic-k20]

well i am having strange issues with this kit - right now i am running 280x10 9/10 divider so the ram is 254mhz and i am not confident that is 100% stable at this speed..

3-3-7-2-13-16-2-2-1-3-1552-1-en-auto-0-8-2-8-normal-6-256-en-16-7-dis

those are my timings for the ram...

the cpu is fine for 2.8ghz probably even higher but this ram is only running 4mhz over spec and even then i dont think its 100% happy - all sorts of strange things happen..

ram will not run 2.5cas at lower speeds - will not run 1:1 at much more that 200mhz

need some pointers on this stuff for sure - side note i can run dual prime for 9hrs and 3dmark will pass but this strange behaviour still happens...?

[mackanz]

Arctic,

Post a A64 screenie and the exact voltages you use on cpu, chipset and memory.

[arctic-k20]

here is cpu-z and a64

for this screenshot i was using 3684 for tref instead of 1552 for testing...

v-ldt=1.30
v-chip=1.60
vdim=2.7 + 0.03%

vcore 1.45 + 110%

[mackanz]

The left row from top to bottom:

3
12
16
3
2
5
2
2
2
2
200 3.9us
1


The right side:

16
128
dis
dis
4
7
5.5
16
dis
200 (change it in bios)
en
norm
dis

Thats the settings i use on a SD FX-55 at 10X280 and 2.90 vdimm on an Asus A8N-sli premium. I have looped 3d03 all day and played a few hours of Quake 4.
Test 1:1 with a lower cpu multiplier. Test at 7 to take it out of the equation.

[arctic-k20]

doesnt matter what settings i try - for 1:1 the highest this ram will go on my setup 257mhz - and that is only memtest stable

games arent stable @ 254mhz - i get erratic behaviour - long pauses where you think the system has froze but after 30seconds it will snap back.....and then eventually lockup..

this is on a divider no less.......i would say well maybe its my setup but this setup ran 512x4 just fine - and had better results than this....im disappointed!!

[andyOCZ]

arctic-k20

I have you board CPU and memory here and am testing for you now.

Use Tref 4708 for starters, but I will post settings soon.