G.skill F1-3200phu1-512nt Review & Discussion

[Spacehead]

DDR 512 PC-3200
CL2.5-4-4-8 2.5V-2.6V
I hope they work as 2 GB set. 4x512. Testing soon.
Sticks cost 52 € for a piece.




First with two sticks:

SPD values:


Edit: Mods , please edit Thread topic accordingly. G.SKILL F1-3200PHU1-512NT


by GST, topic changed , tnx


Edit2: 2x512MB , 3-4-4-8 , 2.8V (didn't try lower or higher voltage yet) , currently SuperPI32M calculating @ 241 Mhz.



, .... and it finished. I have to put settings to manual and try with 4x512MB

[Spacehead]

I had to set Command rate to 2T to get these boot 4x512MB on DFI Lanparty NF4-D
2.8V:



PS. CPU goes 3.1 Ghz with that Vcore.

[Spacehead]

Very worth the price I'd say!
My previous sticks were Buffalo Valueram 3-3-3-8 PC3200 2x1GB that maxed @ 216 Mhz
so these are much better. Thanks G.SKILL

PS. Edit. topic G.SKILL F1-3200PHU1-512NT REVIEW & DISCUSSION

[Spacehead]

Why I can't get dividers 166/200 and 180/200 to work with these?

It posts only with 1:1 (200) and I have to set 180/200 from Windows.

[Spacehead]

up for the question.

[GSKILL TECH]

for divider question is more relate to motherboard and ram. if they dont like each other you can't do too much divider about it.

[Schmetterling]

I've had 2 similar sets, both maxed out at 254Mhz @ 2.5-4-3-6, but I have to add that I didnt have much experience in overclocking ram at that time