help with memory divider please

[icecpu]

Asus P5W DH Deluxe bios 1602
E6600
Corsair 8500C5D

This is my current overclocking
http://i112.photobucket.com/albums/n...g/untitled.jpg

Now , how do I set memory divider so it will run at 500 Mhz ?? In the bios I try to set ddr2 1000 it did not boot up, currently I set ddr2 800 . Please help with advise or any input , thanks

[Exedy]

4/5

[Severance]

Asus P5W DH Deluxe bios 1602
E6600
Corsair 8500C5D

This is my current overclocking
http://i112.photobucket.com/albums/n...g/untitled.jpg

Now , how do I set memory divider so it will run at 500 Mhz ?? In the bios I try to set ddr2 1000 it did not boot up, currently I set ddr2 800 . Please help with advise or any input , thanks

it will depend on where u set fsb.
Make sure to disable q fan control, virtualization, and anything else u dont need in bios. if you leave fsb at 266 and set memory to 1066 leaving spd auto then it will work.

[icecpu]

4/5

in the bios does not have any option selecting divider. it has dram frequency menu , and I can choose ddr2 600 , ddr2 800 , or ddr2 1000 and so on.

[ziddey]

the 1000 setting in the bios is 4:5. Try setting fsb to 401 and then set to the 1000 setting. See if that works first. Then post back

[icecpu]

Last time I set ddr2 1000 , FSB 400 it has continuos beep and no post

[ziddey]

did you try 401fsb? are you changing voltage? timings?

[icecpu]

yes I tried 5,5,5, 15 with v2.2 that's my corsair 8500C5D rated at 1066

I did not tried Fsb at 401 because 400 it did not work , how is 401 fsb will work , thanks