Bh-5 2x512mb 290mhz Spi 1m

**[XC] moddolicous** · 09-13-2005, 06:44 PM

nice results spl. I knew someone would get to do this sooner or later. It seems that the lower the temp on the cpu, the worse the mem controller. I asked OPB to give his 296 (i think) with like a 12 or 13 (if possible) multi for one spi run. He said it wasnt gonna happen because of the mem controller. I think @ around 3200 or so u could get some nice spi runs.

**kiwi** · 09-13-2005, 11:44 PM

lol I've never seen RAM under phase. Good job

What was the max on air? And what volts?

**groovetek** · 09-14-2005, 03:06 AM

i think he's not replying cos his ram is dead, heheeh...

**Kaffebord** · 09-14-2005, 04:11 AM

Be careful and isolate good so they don't die on you.

But anyway good work

**SoF** · 09-14-2005, 10:45 AM

Originally Posted by moddolicous

nice results spl. I knew someone would get to do this sooner or later. It seems that the lower the temp on the cpu, the worse the mem controller. I asked OPB to give his 296 (i think) with like a 12 or 13 (if possible) multi for one spi run. He said it wasnt gonna happen because of the mem controller. I think @ around 3200 or so u could get some nice spi runs.

definitly right for winchesters.
my last 3200+ had strange issues ~-40Â°C sp1m...reboots sometimes, sometimes not ^^
under 2600mhz everything was ok and I was even able to run bh5 with nice timings.
a last air cooled run showed a lot more stable proc and better ram timings

crappy little thing, hopefully i will have a better one here in 2 days

**s7e9h3n** · 09-14-2005, 02:30 PM

Originally Posted by shadowing

That depends on the bios you are using. Usually -2 ones are much better in the orange slots and won't boot in yellow ones. Btw, -2 ones are used for UTT/BH-5.

Ummm, don't you mean the other way around? I've been told that the orange slots on the DFI boards are rated for 3.5V max while the yellows are rated much higher

**althes** · 09-17-2005, 05:43 AM

SO is the memory dead

**Zeus** · 09-17-2005, 08:22 AM

Originally Posted by althes

SO is the memory dead

Is that a question?

Condensation will most likely built up behind the chips, not a good thing if you'd ask me.
Real curious if the ram survived the event myself.

**Vincentvega18** · 09-17-2005, 08:00 PM

Yeah, that was a lot of condensation on there. Assuming that was during the run i would not be optimistic about the ram surviving.

**feizaionly** · 09-19-2005, 04:22 AM

That's so crazy. Put the dryIce on the rams. OMG

**[cTx]Philosophy** · 12-18-2005, 06:42 AM

yah man that is insane a,d I also doubt the lovely bh's survived that treatment, but I sure would love to see some 11 multi ot 12 action on the FX

Lets all hope the ram's mad it.. and more runs to come, who knows maybe opb read this and now has a few ideas

**c48gl** · 12-26-2005, 10:58 AM

Hi mans! Here are a new record( so i think)
http://images.people.overclockers.ru/49926.jpg
P.s.
How is my english??

**Kasparz** · 12-26-2005, 11:07 AM

WTF?
Run spi32m please!
What sticks?

**c48gl** · 12-26-2005, 11:11 AM

Sorry, but it is not my.
What is STICKS???

**IvanAndreevich** · 12-26-2005, 11:14 AM

Sticks - planki pamyati.

Link?

**c48gl** · 12-26-2005, 11:15 AM

All is clear. It OCZ Gold 3500GX 299@ 4,09V.
Look courts. http://forums.overclockers.ru/viewto...12cbc16461dc12
You can ask the author. And than you S*M does not arrange for the test??

**i found nemo** · 12-26-2005, 11:20 AM

i've heard of wc ur ram .... some ppl go "crazy" and put 2 80 mm fans ..... but that wasn't enough for you lol so you changed the way we think and put dry ice on ram .... priceless (if you got the ram for free lol) good job on the pi time and super nice timings on old school chips

**IvanAndreevich** · 12-26-2005, 11:21 AM

There are UTT sticks, watercooled by a vodka-filled loop @ -10C.

Author promises more results after the new year because the waterblocks started leaking and he had to return the phase change unit for the CPU for the time being.

**biohead** · 12-26-2005, 11:25 AM

AMAZING! only 1,2mhz away from 300mhz 2-2-2-5 1:1 2x512mb!

**Jonas** · 12-26-2005, 11:31 AM

this is the best 1gb kit i've ever seen

congrats, insane oc

**c48gl** · 12-26-2005, 11:32 AM

Memory at usual cooling stably worked for the author of the test on 250 at 3,25. At 3,4 she was started on 260, but stability was not observed. And suddenly such memory so has earned. There is you see a memory which works at 265 on 3,5 stably. If her(it) so to start, that can be achieved...

**biohead** · 12-26-2005, 12:09 PM

Originally Posted by c48gl

Memory at usual cooling stably worked for the author of the test on 250 at 3,25. At 3,4 she was started on 260, but stability was not observed. And suddenly such memory so has earned. There is you see a memory which works at 265 on 3,5 stably. If her(it) so to start, that can be achieved...

I'm wondering if you're using an online translator.

**Lastviking** · 12-26-2005, 12:17 PM

Hmm is that T1 or T2

, very nice sticks. hmm i think i need some dry ice on my sticks to break his record. 291mhz with cold air and only 3.8+0.3v i have much to improve

, Let the hunt for 300+ begin. Hmm what mainboard do he use? , +3.3 rail on 4.03v :p

**IvanAndreevich** · 12-26-2005, 01:33 PM

299 is 1T. 2T was possible up to 305, but the owner says it crashed before being able to open paint.

**bachus_anonym** · 12-26-2005, 01:38 PM

Well, I would be a bit sceptical about this result...
First of all, he needs to update CPU-Z to the latest version. Second, how about opening Everest on the Overclock Tab so we can see what memory speed it reports. 298MHz would be very, very hard to get stable for 3DM03, left alone S&M... Maybe he is on a divider?

Don't get too excited about this yet. Some additional verification is needed in this case.

Thread: Bh-5 2x512mb 290mhz Spi 1m

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions