Man my temps dropped alot! I am giong to run this at 2.8 for another half hour and then turn it up to 2.9
Man my temps dropped alot! I am giong to run this at 2.8 for another half hour and then turn it up to 2.9
Looks like you got a winner, I wanna see some xtreme cooling results now, or at least water
CPU: AMD FX-57 0516
Ram: G.Skill 1gb PC 4400 LE / 2x512 Mushkin Redline
Video Cards: BFG 7800 GTX Viperjohn modded
HD: 2X WD Raptors 74gb
Sound: Sound Blaster Audigy 2 ZS
Case/Cooling: Lian-Li PC65 - Vapochill LS
Mobo: DFI NF4 Sli-DR
PSU: PCP&C 510W SLI
This may be the chip that the guy was talk'n about. I know I know I need a sig.
Nice who's chip is that? Talk about extreme cooling!Originally Posted by jot
That would be mine. U prob saw my post at DFI STREET.
What cooling dice??Originally Posted by jot
CPU: AMD FX-57 0516
Ram: G.Skill 1gb PC 4400 LE / 2x512 Mushkin Redline
Video Cards: BFG 7800 GTX Viperjohn modded
HD: 2X WD Raptors 74gb
Sound: Sound Blaster Audigy 2 ZS
Case/Cooling: Lian-Li PC65 - Vapochill LS
Mobo: DFI NF4 Sli-DR
PSU: PCP&C 510W SLI
Phase @ -50c. Still burn'n chip in but I hit 3306 at 1.86 vcore that's too high for my cool'n. Maybe after I burn for a week or so I can hit 3.3 at like 1.65 or 1.7 I hope.
Last edited by jot; 08-02-2005 at 09:50 PM.
Loaded?
CPU: AMD FX-57 0516
Ram: G.Skill 1gb PC 4400 LE / 2x512 Mushkin Redline
Video Cards: BFG 7800 GTX Viperjohn modded
HD: 2X WD Raptors 74gb
Sound: Sound Blaster Audigy 2 ZS
Case/Cooling: Lian-Li PC65 - Vapochill LS
Mobo: DFI NF4 Sli-DR
PSU: PCP&C 510W SLI
Really Really nice! I wish I had some phase..But I am making due with what I have. Which isnt to bad..Originally Posted by jot
Oh sorry under load -44c.
Cant be a singlestage, the heatload at 3.2gh 1.77 has to be enormous..
CPU: AMD FX-57 0516
Ram: G.Skill 1gb PC 4400 LE / 2x512 Mushkin Redline
Video Cards: BFG 7800 GTX Viperjohn modded
HD: 2X WD Raptors 74gb
Sound: Sound Blaster Audigy 2 ZS
Case/Cooling: Lian-Li PC65 - Vapochill LS
Mobo: DFI NF4 Sli-DR
PSU: PCP&C 510W SLI
2.8 @ 1.38V? Holy
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Yep modded vapo with 507. Try'n to build a dual maybe in a week or so.
Where do you see that??, and jot whats the die temp (bios temp), it has to be what around -1 - +2 degrees??Originally Posted by IvanAndreevich
CPU: AMD FX-57 0516
Ram: G.Skill 1gb PC 4400 LE / 2x512 Mushkin Redline
Video Cards: BFG 7800 GTX Viperjohn modded
HD: 2X WD Raptors 74gb
Sound: Sound Blaster Audigy 2 ZS
Case/Cooling: Lian-Li PC65 - Vapochill LS
Mobo: DFI NF4 Sli-DR
PSU: PCP&C 510W SLI
-12 I think will ck.
CPU-INTEL x6800
MOBO-ASUS P5BD
VIDEO-ASUS 7900 GTX
HDD-2XRAPTORS@ RAID 0
PSU-TERMA-750
COOL'N-WATER
MEM-PAT 6400
Heh -44 loaded. Sounds like to me the sensor (which is known to be not the best one out there) is located right where it used to be at (the coldest point in whole thing). Even rough estimate tells me evap is around -20c though. Which is darned good with the load. Going for 2nd revision of my Lian-Li with 1/2 HP Compressor this time. REALLY want to see cold temperature in single phase with these chips.Originally Posted by jot
Close -24c idle -18c load. That's after a couple runs of pi 2m. Hey njkid32 let me know how that 704 bios works out for ya tried it with my 3000 but 623-2 worked better for me.
Last edited by jot; 08-02-2005 at 10:41 PM.
CPU-INTEL x6800
MOBO-ASUS P5BD
VIDEO-ASUS 7900 GTX
HDD-2XRAPTORS@ RAID 0
PSU-TERMA-750
COOL'N-WATER
MEM-PAT 6400
Here is a ss at 3ghz. I didnt run any tests I just wanted to see if would boot. I am going to burn-in overnight and see if I cant get my volts down a little..
very nice, and thats still on air cooling???
Conroe E6300 ES
2x1gb Ballistix PC8000
Asus P5W DH Deluxe (1705)
Manli Geforce 7950GT 512mb
Hiper Type-R 480w
Samsung SP250
"What did the quantam duck say?" "Quark Quark"
Oh yeah thats all I have for now. I am going to run a burn-in right now at 2.4 1.26v and see if I cant break this chip in this week.Originally Posted by don_vercetti
Well I was using 510-2fixed at first and I just flashed to 704-2fixed so I will let ya know how it goes...Originally Posted by jot
Well quick report. I am not going to push it too hard really till I get my cooling back in line again... :POriginally Posted by njkid32
Using both hit 2.4ghz default v-core (which is 1.35v but reads 1.31v in windows) prime 95 stable.
Here is funny story after that though.
Chip 1) no matter what v-core the chip won't scale past 2.4ghz... it will LOCK UP trying to run dual prime past that. It took me a while to find out that 2nd core will lock up past 2.4ghz regardless of temp or voltage. Interesting... (until lock up happens, though even 2.45ghz was prime 95 stable...under stock volt) => sympton happens for both stock cooler and Zalman CNPS-7000ALCU
Chip 2) Wish this chip would scale as good as first one but this one at least behaves like it should with voltage. 2.4ghz dual prime stable at stock voltage. Notch up voltage (1.375 => 1.34) and dual prime stable @ 2.5ghz so far. Not bad (against stock cooling) From my experience with X2 4200, it seems like this will be able to go 2.65-2.8ghz dual prime stable with highend air around 1.55v - 1.6v. Not sure if I am going to bother it with too much until my cooling gets ready (that themal take typhoon is B*TCH to install -_-
Hm even with IHS removed, that sounds kinda strange. Maybe a BIOS problem ?
Great results man, keep up the good work!
Bookmarks