I got my khx3200ak2 IT wont do crap!!!

[quicksilver98]

Man i got this stuff and it barely runs the default speeds and timimgs... wth? Ive tried it a 200 1:1 @ 2.63v and it acts flaky sometimes... And it wont OC for crap... Im puzzled...

[CSOFT]

Set the CPU to run at 333Mhz FSB and the Ram to run at 400Mhz and see what happens.

[quicksilver98]

this board dosent have that option...

[CSOFT]

I dont remember the Bios or the 8RDA to good, but its should have something to run the ram faster then the CPU.

Also, are lowering you CPU clocking when trying a higher FSB? Your CPU might not be able to do a higher FSB at 2.4Ghz or may need more voltage or L12 mod.

[The Stilt]

KHX3200A sticks are definately with Winbond CH-5 chips.
Sticks without that "A" are allways with BH-5 chips. Unlike CH-5 chips, BH-5 chips can run much tighter timings and higher speed, thou it takes alot more voltage.

I´ve got 20 KHX3200 sticks with BH-5 chips and all of them make atleast 225MHz 2-2-2-5 @ 2.9V. Best stick I have found, can make 235MHz 2-2-2-5 (in DC) @ 2.85V

Too bad, that the highest FSB my 3.2C is capable to run ATM, is 16x235MHz with stock heatsink and voltage, so I cant test the sticks at higher speeds

My previous KHX3000 (BH-5) sticks could make 225MHz 2-2-2-5 with 2.9V, and with 3.28V they ran perfectly @ 250MHz 2-2-2-5, so perhaps I can hit 260MHz with those cherry sticks with proper voltage

[quicksilver98]

well if its the board would i be better off ordering a new mobo?

[Soulburner]

My CH5 needed a LOT of burn-in to run good. I gave up and went back to them after a month of gaming. They would then post +35mhz higher than before...

[althes]

return the sticks if you can and get the bh5 ones. Keep the board.

[quicksilver98]

well now my board dosent wanna post at 200mhz.... but if i set the mem to 5:4 it works... i think i need to replace my board...

my buddy said he'd trade me his mushkin pc3200 lvl1 for this ram?
anyone?

[antonio]

KHX3200A sticks are definately with Winbond CH-5 chips.
Sticks without that "A" are allways with BH-5 chips. Unlike CH-5 chips, BH-5 chips can run much tighter timings and higher speed, thou it takes alot more voltage.

I´ve got 20 KHX3200 sticks with BH-5 chips and all of them make atleast 225MHz 2-2-2-5 @ 2.9V. Best stick I have found, can make 235MHz 2-2-2-5 (in DC) @ 2.85V

Too bad, that the highest FSB my 3.2C is capable to run ATM, is 16x235MHz with stock heatsink and voltage, so I cant test the sticks at higher speeds

My previous KHX3000 (BH-5) sticks could make 225MHz 2-2-2-5 with 2.9V, and with 3.28V they ran perfectly @ 250MHz 2-2-2-5, so perhaps I can hit 260MHz with those cherry sticks with proper voltage

How about if i would add another foundings which resulted in the reason for quicksilver98 to make a shout out of his ram....

I found 1 1GB kits consist of a Infineon CE5 under the sink....it is a KHX 3200AK2

[Vincentvega18]

Wow, now thats someone who uses the search function

[antonio]

Wow, now thats someone who uses the search function

did u mean me????

correct me if i mistake but i didnt use the search button...i opened up the HS ram itself....biought it yesterday...kinda hoping CH but ended up with Infineon CE 5

[Vincentvega18]

I mean bringing up a thread from 2 yrs ago, although youd be better checking out how ce-5 clocks in a different thread.

[antonio]

wow...thats true bro...how come thats possible??? hahahaha...

links to CE 5??

ok gotcha....