Quote Originally Posted by pershoot
its definitely not the bios.

there was no reason for you to switch back to +3 for flashing. however, are you sure you switched back and forth (5 -> 3, 3 -> 5) in an ok manner?
no.. i dont switch to 3+ for flashing,

i flashed my bios under my 24/7 config.. which is using 5v jumper (vdimm @ 3.55v) .. after flashing bios.. i shut down and switch the jumper @ default (<3.2v jp 1-2) and then clear cmos..

my suspicious is.. after 24/7 with 3.55v for 1 week, and maybe 3 months of 3.3v before ... and then give it 2.6v MAYBE kill the ram.. just a wild guess

or maybe my ram decided to give up.. - so i wrap it with dielectric wrap (from vga)- and put it on my freezer lol.. let see if 24/7 at zero temps wakes her up

btw pershoot.. thanks for the bootable BIOS CD.. never had a chance to say thank you

will try again hellfire bios in couple of days..