..and here is the screenshot, it was 2921MHzOriginally Posted by Dani
2921MHz SP32M with Zalman 7700CU
BTW, I set 0517BDEW with Zalman, firs boot ever with that chip straight into StressPrime2004 @ 2823MHz 1.64V, 31min has gone, lets do 24h
..and here is the screenshot, it was 2921MHzOriginally Posted by Dani
2921MHz SP32M with Zalman 7700CU
BTW, I set 0517BDEW with Zalman, firs boot ever with that chip straight into StressPrime2004 @ 2823MHz 1.64V, 31min has gone, lets do 24h
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
Dani, awesome results
where's sobol, we need an update
Intel Rig
2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
Custom Water of course
Thanks Absolute_0
0517BDEW with Zalman 2823MHz 1.64Vcore now for ~17h StressPrime2004
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
So which stepping is the magic one? I've seen very good results with 0517 LBBLE cpus and the *PMW stepped ones do as before, rock!
Intel FTW!
Beanna
my first venice
AMD64 3200+ 512k cache (Venice)
ADA32000DAA4BP
LBBLE 0518APDW
System
3200+ 0518 APDW water cooled
DFI NF4 SLI-D 310 official
2x eVGA 6800U PCI-E SLI 76.10
120GB WD 1200JB
650W Silverstone SLI PSU
WinXP Pro SP2
NF4 6.53 remix chipset drivers
Suicide run
---
Absolute_0 im not updateing coz there isnt much to update. Im waiting for OEM to show on market or cpu from 0518 week. But there's not much info's about 0518 , as much as i seen 0518 aint good week same as 0516 wasnt ( with some exludes ). I can advice to buy if you have chance relly quick 0515 or 0517.
Greetz
i3770K@ 4.4 - 1.25v - TR120 Black+ Scythe GT AP-14
Crucial Ballistix Tracer 4x4096 DDR3 1866Mhz
Asus P8Z77-v Deluxe
PowerColor HD R290 moded to X
Samsung SSD 256GB 840 Pro
Samsung HDD 7200RPM 2TB (2x1TB) SA(N)TA
Corsair HX 650W
Antec P182 +3x Scythe -800-1200RPM
Asus 27" VN279QLB
Logitech G100S, CM Storm Quick Fire TK
Win 8.1
LBBLE 0517 DPMW, 2.6GHz @ 1.4x1.04v (sensor display = 1.408v), 2.7GHz might work at 1.6v+ but I can't keep it cool enough with that much voltage. 2.7 is NOT stable at 1.55v though.Originally Posted by NiCKE^
[DFI nF4 Ultra-D @ 6/15 BIOS] // [Venice 3000+ @ 2.8GHz @ 1.472v] // [2x512MB SP BH-5 @ 2-2-2-8 200 MHz 2.63v... for the moment] // [Sapphire X800XL Ultimate] // [OCZ Powerstream 520W]
Super PI 1M record: 29.969 // Suicide screen record: 3 GHz // LBBLE 0517 DPMW batch ~300 on air // Stable enough?
TB 900 + Venice 2800 folding 24/7, TB 1200 folding whenever it's on, profile
try 2.7 with stock vcore.. the 0517 DPMW looks the best now at the moment
my LBBLE 0517 DPMW
stable as rock
2700 at 1.4v bios (sp2004 9hours// 3dmark2001se//32mb superpi)
2800 at 1.5v bios (sp2004 9hours//3dmark 2001se//32mb superpi)
Last edited by TEDY; 05-31-2005 at 09:06 AM.
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
How many hours Priming is "stable as rock" or did you just run SP1MOriginally Posted by TEDY
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
almost 9 hours while i was at work
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
My Venice 3000+ LBBLE 0516CPBW is not good.
pass 3d mark05,super PI 32MB,fold,game......but can't pass Prime
Thats not bad, i dont see many here that post prime over 2.7.
Everything extra is bad!
same 3200+ 0518 APDW trying low vcore
---
this thread should be stickied
GUFY, your 32M SPI result is terrible.... what's that, @100 divider for the mem? runnin 2.7GHz and a score of 40m+ is quite bad....
32M SPI means nothing for stability? yeah, right.... sure....
Mollov,
Runnin' a 700MHz SlotA Thunderbird...
HardwareSight.com Owner
TodB : that's correct...
i can 32mb SPI at 320*9 very easily, while prime reboots my PC...
Overall i can bench/prime/play/spi -> 315*9 at 1.55v (1.5v cpu-z) easily
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Gufy said that super pi 32mb pass means nothing for stability .....which is true
edit:LOL!! Tedy 1 sec
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
0517BPDW Venice 3200+
- StressPrime2004 stable for 21h 2853MHz 1.64V Zalman 7700CU
After 24h I test 2.9GHz 1.64V
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
Hi all,
I need some help....
Ive got a Asus A8N Sli - Non Delux
Today i had shipped to me a lovley new 3000 venice, along with a A64 Freezer
The stepping is; LBBLE 0517 APQW
I understand that one user on here acheived 2.8/2.9ghz with this chip, however it was watercooled. I ran the same vcore as the guy (1.45vcore) and started to clock, went from 200 to 240, in 20 fsb increments. I reached 250 and ran super pi (aswell as @ 220 and 240) Super Pi came up with an error 'not exact in round' So im assuming it meant it wasnt stable.
Details;
Ram @ 2.85v, loose timings (3-4-4-8) Ram is OCZ 1GB 4400 Perfomance Series
cpu @ 1.45v
HT @ 3
Divider - 1:1
I need some help from the xperts
Cheers
Gangstar
Run your ram on the 150 or 133 divider to rule out the ram. Then if still not able to pass super-pi up the vcore.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
Some preliminary results:
3200 LBBLE 0516DPHW
Burning in ATM at 2.7 GHz, 1.675V using CPU Burn-in, error checking turned off. Surprisingly, temps just about hit 42 C. This is a bit off isn't it? With my 3500 NC, I would see temps of upto 52 C, 1.65 VCore. Surely something is wrong.
I will drop the VCore later tonight. Also, I could get to 2.55 at 1.4V (stock) and 2.65 (1.625V). All of these are Super Pi 32M stable. RAM was manually set to about 185MHz (2.5-4-4-10).
After snooping around these forums, hehe.. noticed there is a 1T issue, put the memory to 2T and currently at 290FSB * 9 = 2.6ghz @ 1.45Vcore. Super Pi 1Mb Stable, will do 32mb later on.
Hmm, wondering if someone can help. I got a 0517DPJW 3000+, and Epox EP-9NDA3J. I turned down the multiplier to 5x, and ram to 100. My HTT/FSB goes all the way up to 355 no problem. When I put the multi back up to 9x, I can only turn up the FSB to 280, for an oc of 2520. This is regardless of vcore, stock or +2.0v. If I even go to 285, bios, cpuid, everything reads as 9x200 = 1800. At that point anything higher, even 300fsb, says 9x200.
Voltages and temps are ok I guess. Is 2520 the max of my chip? I think it's a mobo issue right, that's why it's resetting itself to 1800mhz when i push it past 280 fsb. Oh yeah, the 2520mhz is fully stable after over 12 hours of prime95. Any ideas would be greatly appreciated!
tried a bios change?
Bookmarks