all benchmarks have Digital camera version:
Let's see some actions:
Vdimm--->4v
pi 1m
DC:
bandwidth:
DC:
**not really maxout yet..
all benchmarks have Digital camera version:
Let's see some actions:
Vdimm--->4v
pi 1m
DC:
bandwidth:
DC:
**not really maxout yet..
Last edited by Onepagebook; 02-04-2005 at 06:50 PM.
That Super Pi looks a little high... some guy in the Xtreme Overclocking section got 27s with a winchester at 2991MHz... Aside from that small issue, very XTREME!
7700k @ 5.0GHz
ASUS Z170-Deluxe
2x8GB Avexir Raiden DDR4-3000 15-15-15-35
Gigabyte Aorus 1080 Ti @ 2076/1500(6000)
512GB Samsung PM961 + 840 Pro 256GB + some TBs
Corsair AX1200i
X-Star DP2710LED @ 110Hz + 40" Samsung TV
CPU and GPU under water: 9x120 rad + 3x120 + 3x120
...and an HTC Vive!
oh very nice...
how about 3d mark 01?
Originally Posted by Bennah
someone get me x850xt pe..
OPB
**by the way, I forgot to mention, it's running under win2k3
not bad!
it seems that they really improved the chip!
i think 27xmhz were the maximum with the "old" chips right?!
mfg
These must be old BH-5 if that is what you mean..Originally Posted by killingspreez
I don't think anyone has the new stuff.
It is very possible, though, both Tom Haolck and CPULLOVERCLOCK has been past 300 2-2-2 afaik. And Bigtoe saw a great improvement in BH-5 oc on the DFI boards too.
edit: Too slow
Originally Posted by SlackeR
Ya, I know it's too slow..
will study more..
OPB
No matter what ram you use OPB, you get the best out if it every single time
PS: is this "new" BH-5 as in "new production twinMOS SpeedPremium ddr450"?
or just some new sticks for you?
Halt On : No Errors
My cup is half full, yours is emtpy... now THAT's optimism
horum omnium fortissimi sunt Belgae: A64 FX OC record on Dry Ice by Jort, kristos, troid, C_X and "Moortgat"
Originally posted by lazyman
You are in trouble only if you admit it. Intel is never in trouble.
Originally Posted by kristos
that's my very old mushkin pc3500 level II, and I took the heatspreaders out!
OPB
Omg but still ... I all over my desk
:banana4:
Asus P5B-Deluxe
Intel Q9650 @ ~4Ghz (still testing)
3GB Bad Corsair @ ~450 5-5-5-18 (still testing)
36GB Raptor
250GB Maxtor
1TB WD
X-Fi Gamer
3.9vdimm thats quit xtreme OPB :thumbsup: .
I did 10x253 at 3.14vdimm(mm) on my dfi nf3 250,tonight i will see how far the will go at 9x or 8x.
I hope i get some lucky vibes from you ,you have alot of them,nice x-files mem and nice old mem .
Asus P5K<*>OCZ 450w<*>E6600@4.0ghz@9x445@1.450v<*>TeamXtreem DDR2-800 cl3 2x1gb<*>Sapphire 3870 512mb DDR4
Asus P5E X48 DeLuxe<*>OCZ 700w<*>E8600 E0@4.6ghz@1.350v wc<*>Corsair Titanium DDR2-800 4x2gb<*>Sapphire 2x3870 2x512mb DDR4 CF
Nice clocks mate, very nice
There are quite a few OS tweaks to get that SPI time down if you can be bothered..
But I would rather see some 3dmark01 runs myself
wow.. i almost shat myself. I havnt even gotten my tccd up to that speed yet, and your doing it with bh5... its a crackup that bh5 started out a pc2700 memory.
bandwidth probably hurting a bit due to Trc, Trfc and Max Async Latency settings ?
---
Originally Posted by eva2000
thank you all experts here,
Eva2000, yes,
but when I try to give that better parameters, honestly, I can't run anything.
well, I think async latency is about right there. 290+ fdb is kinda hard to run 6ns or 7ns though. But trfc..I will check it out. thank you very much.
opb
Finally, 4V
That's what I was thinking about bandwidth too...
On Neo2/Winnie/Bh-5 I get efficiency of 91%/89% @ 272x10 but that's with 7-12... but I don't think you'd be able to tighten those timmings and still run same speed, though
Excellent work, regardless.... Would be nice to see some 3D action, too OPB
Last edited by bachus_anonym; 02-04-2005 at 01:24 PM.
not bad OPB. Let's see if you can beat Mr.Icee's 310 1:1 2-2-2-5 done on AN50-R/3200+ and OCZ ram
do you have any screnies of that? i so want to see itOriginally Posted by QuadDamage
Is that just screen capture or do pi and sandra?Originally Posted by QuadDamage
If that's benchable..then I have no way to beat it by using only 4v..
OPB
Sorry to say but some time ago i dug up those screenie's and found that his screens were with ,5 multi's.Originally Posted by QuadDamage
Off course back then nobody knew about that divider thing.
I think the RAM ran 283 or something if my memeory serves me right.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Quad my old friendOriginally Posted by QuadDamage
Great to see you ! And while reading this I'm glad someone remembered that run I made with OCZ PC3500 Platinum LE back in December '03. I was reluctant to toot my own horn here, but that accomplishment can be found here and here . Granted it was single channel.
Hats off to OPB for pulling this feat off in dual channel with BH-5 !
And those are right about the 1/2 multi deal, we did not know that issue at that time.
Just be careful with 4v to your memory controller, extended time spent there will have you posting to C1 on a debug card
Randi
Last edited by MrIcee; 02-06-2005 at 04:37 AM.
nice bh5
cpu:qx9650@4ghz
ram: gskill pc8000qt 4*2gb
MB GB X48-DQ6
Gfx 9800gx2
Disk:2*1tb raid0
That's just too fast
Very very nice score OPB !
I'm expacting more
dnb-sets 4tw
Drum n Bass Arena ..
WPO Powerlifting
I just played with a pair of Mushkin LVL2 PC3500 (2x512MB) to, but that's on a Intel platform - they're maxed 43MHz below your results (DDR500 2-2-2-5 - 3,3v).... they are ing insane your results!!
Bookmarks