I've haven't been around for a while and need some advice.
My T-Bred B 2100+ took a sh*t last night. I had it running at around 2400Mhz forever. Anyway, what's the latest and greatest? I'm using an NF7-S 2.0 and need to figure out what to get next.
Thanks for any comments.
well , the atlon xp is out, and its jest a mater of time until he become to history.Originally Posted by ntruax
amm the best and new that you can buy for 462pin is the sempron 2800 i think, the athlon 3000+ is out but you can find used one.
Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|
RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1
Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX
http://www.newegg.com/Product/Produc...82E16819103508
got just the chip cuz i figured you still had heat sink and fan
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
Go with a Mobile Barton if you're not willing to replace the mobo and stuff.
Yep XP mobile....far more chance of a stable OC...
something like this
http://www.newegg.com/Product/Produc...82E16819103401
Last edited by Ugly n Grey; 08-31-2005 at 07:41 AM.
"Foldin, Foldin, Foldin...keep those benchers foldin..." (Lyrics by Angra, Music is Rawhide)
BOYCOTT MIR's
get this one I have 2 of them
One is on a Zalman 7000alcu @ 2500
and the other is on water @2650
http://www.newegg.com/Product/Produc...82E16819103439
312 Xeon Threads + GTX 1080 + GTX 1070 + BFL Monarch 700
XP mobile its a nice choice.
Portugal@Home status: running
Hey thanks for the replies. I had forgotten about that 2500 mobile. I'm either gonna get that or the 2600 mobile. I'm using a Swiftech Quiet Power liquid cooled case and want the best overclocker possible (don't we all).
Notice that 2400+ is a 35w... might be an even better bin. It runs an even lower voltage.
What happenned to the tbred anyway? I blame my cpu last after the times I've wrongly accused it. I give my board the evil eye now first and always.
A mobile was my last socketA. Can't go wrong if thats what you are after. You could think about it forever or just pick one.
Last edited by texuspete00; 08-31-2005 at 05:45 PM.
I switched boards and I think I fried it (NF7-S 1.2 to a 2.0 that I've had laying around here for like a year). I didn't get the waterblock lined up right and it fried. I've changed it so many times though I just got careless. Oh well , I wanted something better anyway.
I agree!
Mobile Barton 2500+ and ABIT NF7-S v2.0 were the best pair!
You have to seek for a good stepping cos Bartons are not up to date and then good o/cs!
Well I went with a 2600 mobile. The max it'll go so far is is around 2750 (11.5x240) but it doesn't like it. I've tried getting higher fsb but I think my ram is holding me back now. It's XMS3500 but I'm using 3 256 sticks. I just ordered some of their 4400 so we'll see what it'll do with that.
What is considered safe voltage with these things? I have it set to 1.95 volts in the bios but CPU-Z reads from 1.904-1.888. Temp is 46C.
what is it at stock, i personally say .250 volts more is fine
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
1.9v should be okay on air for bartons. I run a poor 2600 non mobile @ 2370mhz, 1.92v for nearly 4-5 months now.
I ran my older 2600 Mobile at 1.95v+ on air too but higher frequencies-> more temp
Most will say 1.85v limit on air, but In my opinion 1.9v is good.
So on water 1.90-1.95v should be safe.
i5 3570k | Asrock Z77 e4 | F3-2666CL11D-8GTXD | GTX660Ti | HX650 | 2xU2312HM
Posting Permissions
Reply With Quote
Bookmarks