where did you bought that memory? any link?
where did you bought that memory? any link?
Some info:
TMD7608F8Ε50D 04514 and beyond is the good stuff, earlier is mosel or something else
TTD7608F8E50D which also is in production atm (I have a 0436 one afaik) is Mosel-tec crap
look for those chipsets and dodge the -TT P/N ones, 50D just means 5ns. Gl ram hunting and happy new year.
esdee Chips (Twinmos Mtec 50D)Originally Posted by IvanAndreevich
and winbond chip...
my bad
check the prev page!!
@tictac directly from the importer :-( sorry no link
if this is your first night in xtremesystems,
you have to overclock.
http://www.newegg.com/app/ViewProduc...218-059&depa=1where did you bought that memory? any link?
http://www.newegg.com/app/ViewProduc...218-404&depa=1
I ordered the 2nd one.
Last edited by trans am; 12-31-2004 at 10:59 AM.
wow... Thanks
here is a pic of the full module to avoid any misunderstandings!
if this is your first night in xtremesystems,
you have to overclock.
Interesting. I just looked at my vx and there is no sign of the dimples(circles). Either ocz found a way to cover the dimples when the chips were fabed, or it's something different. Is is possible to "blanket" the ics?
Last edited by trans am; 12-31-2004 at 11:14 AM.
very strange. The ram you are showing has mtec ic's in the newegg photo.
thats why i posted it,
to be clear what chips to look for!
if this is your first night in xtremesystems,
you have to overclock.
Ok, so you're saying the ones I ordered (speed premium) with the dimple are the "good" ones?
could be!? but i think it's safe to order excactly the same (cheap ones) with me ... haven't seen those chips in any other module.
Maybe twinmos desided to change the chips used on those Dimms from mtec to those new nice chips ... i mean they are pretty new, just 1 week old!
if this is your first night in xtremesystems,
you have to overclock.
they like tweaking too (i just can't touch the Trfc any more!)
if this is your first night in xtremesystems,
you have to overclock.
What kind of voltages do these modules need to run high speed/low latency?
Oh, and where can you buy the "Speed Premium" modules?
Last edited by wicktron; 12-31-2004 at 12:16 PM.
im using 3.5V right now@241MHz... they also seem to like burn in! so i hope to get them around 250, should be awsome for some cheapo 140euro mem!
if this is your first night in xtremesystems,
you have to overclock.
remember OCZ said that only a small % of the chips the were speed binning actually passed the test
??
I thought I saw someone pot in one of the VX threads that the VX had the dimples also?
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
Thats a pretty high voltage
Last edited by wicktron; 12-31-2004 at 12:40 PM.
Actually one of the 2 DIMMS does 'only' 240 @ 2-2-2-5!
the other one does 245 (and still going ...) at 3.4V
I guess the other one was holding me back when run in dual channel
(im in love with that girl in your avatar!)
if this is your first night in xtremesystems,
you have to overclock.
If you run lower latencies, can you tone down the voltage?
I was just reading reviews on the Speed Premiums and it seems like they are hitting 240 2.5-3-3-x at 2.8v... Your 3.4v seems ridiculously high
except that my mem is not Speed Premium ... ill give it a try thou
if this is your first night in xtremesystems,
you have to overclock.
i see, i may pick up a stick or two then
i see, i may pick up a stick or two then
for 140euros per 2x512 modules it's worth a try!
i can't wait for twinmos to handpick those chips!
if this is your first night in xtremesystems,
you have to overclock.
hand picked = cost goes up, a lot, when its buy>attach ic's to pcb>throw out the door , its cheap, when you test them it increases cost a shedload.
has anyone actually tried 2x512 bh-5 on a newer ath 64 939 board with similar voltages to the VX? i mean, i could hit 245Mhz with mine with 3.3v and i didn't want to voltmod. might have a play with a board, my booster and some bh05 before i sell it all.
Mail Me | 3500+ , dfi sli-dr, g-skill la, 2x6800gt, 600w pcz, stacker case, air cooled
Posting Permissions
Reply With Quote
Bookmarks