Quote Originally Posted by bigtoe
anyone got a nice easy mod with pics? Im after adjustability so removing the resistor is not for me
macci posted this earlier in the thread:



I checked the code on the resistor, it's supposed to be a 50k but you may want to double check.

kyosen used a 50k for all 3 mods but you used a 100k for the Vdimm mod. Is a 100k better? and if so, why is it better?

503 means 50 with 3 zero's right? but what's the 420 stand for?
Quote Originally Posted by FUGGER
Re install the processor. I had the same problem. Make sure you turn the screw on the CPU socket all the way to the locked position. It gets firm at half way.
This is just embarrasing, I completely forgot to lock down the processor via the screw

After fastening the screw, it all worked nicely... for like half an hour
Then I booted and I noticed setFSB and clockgen not reading out the values.
I rebooted hoping that would fix it but I was greeted with a single long beep that was beeing repeated all the time.
After uninstalling the board I noticed a trace blew.