LOL,Originally Posted by trans am
I think all the oc geeks suffer from the same (me included).
Good luck with the new rams and I’m sure your wife will understand… or not
LOL,Originally Posted by trans am
I think all the oc geeks suffer from the same (me included).
Good luck with the new rams and I’m sure your wife will understand… or not
hahaha...do they sell this RAM in the UK? Methinks i'll grab some for my upcoming A64 rig
I live in the UK and I ordered mine online from eXacliber... Should turn up Monday/Tuesday...Originally Posted by sr4470
Intel® Core™ i7-875K @ 4216Mhz For 24/7
Gigabyte GA-P55-UD6
2 x 2Gb DDR3 Kingston KHX1600C9D3/2G HyperX
Thor's Hammer with 2 x 120mm 90CFM Push/Pull
Asus EAH5970/G/2DIS/2GD5
5 x WD 500GB RE3 SS'd to 50GB each in RAID-0
1 x WD 1.5TB RE4 - Storage
APC Smart-UPS 2200VA
CoolerMaster Stacker CM690 II Case
Need Water...
Oh...but i thought the warranty only covers up to 2.9V +-5% ? Or am I missing something here?
You NEO2 guys. Make sure you adjust the LT to 3X after 260's HTT to give it a fighting chance, and obviosly set agp to 67 to lock pci. Also chipsets with early dates are not reaching the same heights as the most recent ones.
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
Thats part of the reason i didnt rush out to buy a system as soon i read about athlon 64 being good a few months ago...
Ha. Right when they come to you bugging you that you're not spending enough time with them and you get aggrevated and give them a look, they always say: "Is something wrong?". And yes, they always come in right as you're getting frustrated, and always misinterpret your frustration as something -they- did and not something the computer did. And of course, arguments ensue...
Women...
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
hmmm
Got all that, not sure whether to check my chipset though... I've already had it off and covered it in AS5 - should have checked then really!...Originally Posted by xgman
Plus I'm not going to RMA my board because it's got an older chip on it... It's too much hassle!
I've also read conflicting reports on this site about older revisions and newer revisions and also chips from Korea and Taiwan all doing high HTT's.
I think it's luck of the draw...
Intel® Core™ i7-875K @ 4216Mhz For 24/7
Gigabyte GA-P55-UD6
2 x 2Gb DDR3 Kingston KHX1600C9D3/2G HyperX
Thor's Hammer with 2 x 120mm 90CFM Push/Pull
Asus EAH5970/G/2DIS/2GD5
5 x WD 500GB RE3 SS'd to 50GB each in RAID-0
1 x WD 1.5TB RE4 - Storage
APC Smart-UPS 2200VA
CoolerMaster Stacker CM690 II Case
Need Water...
I have nf3 0440 taiwan. ldt is 3x and agp/pci is locking when I look in clockgen when set to 66. I have bios 1.41 and official 1.40Originally Posted by xgman
trans am
Xtreme Member
Join Date: Jul 2004
Location: manhattan, NY
Posts: 777 W000T
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Ok guys,
just finished yapping with a Canadian reseller of this stuff and was told that only 4 1GB kits were sent to Canada total?! This one place got 2 of those 4 and that was it until well into the new year. I managed to snatch up the last kit on a preorder which should be arriving today or monday latest. I have an NFII board only so I guess I will be guinea pig on this. I will let you know what I come up with.
Originally Posted by trans am
my god dude, we must be twins (or our ladies are) that is *DEAD ON* what happens in my house...and why i said I will be testing more today and not lastnight (she's working till 930pm tonight)
got me an old A: from work and memtest on a floppy so ill be ready after work to "go to town" on that ram...
Last edited by Joe Camel; 12-03-2004 at 08:58 AM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
If you mean the AMD or MB warranty then you are probably right. I think most that buy this memory give little regard to warranties.Originally Posted by sr4470
The memory is warranteed to 3.5v.
looking better each day , keep on tweaking guys :-)
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
So my question still stands.....What is the most effective way to burn in this memory?
Thats a hard question to answer , Eva sent a link on some methods a few pages back
I just find where its erroring in memtest a few errors per pass then loop some windows benches ( pi , prime ) for a while , then start slowing going up in speed , even though I know I might be getting a few errors . then go back and re memtest later
I would start at 3.3 volts and go from there
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
I am sure more went to canada that that , you should try some other retailers if you cant manage to find it
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
Originally Posted by trans am
bro you know were i stand on this subject! (im in the same boat)
make sure you can balance your life man.
really when it comes down to it your pc will always be there,
BUT your girl might not! which is it harder to live without?
just give her some love and attention. maybe try to include her, or show
her what it is you are doing while not focusing on her.
my girl thinks its cute that im into PC's because if you knew me you
would never guess that i was a total hardware geek
but the only reason she accepts it is because i make sure to come
out of the office every hour or 2 to say hi. try it girls love attention
and when you are on your PC its like your with another girl.
Last edited by aCidbAbY; 12-03-2004 at 10:47 AM.
well I talked to someone who is supposedly good with you guys. One of the only fully authorized dealers. No one else locally is even touching this stuff.
I think I snagged a pair though so all is good. Looks like I will be the first and only NFII tester for these chips.
Originally Posted by cantankerous
Got a guy on a UK forum with em, seem ok but he's obviously pulled back by the chipset
Oli
AMD 146 Opteron 280x10
DFI NF4 Ultra-D
1024mb Crucial Ballistix 255 3-3-3-6
long time reader/troll of this forum and finally had a reason to post.
this ram looks sweet but its so hard to find in canada its rediculous, i refuse to pay for shipping/brokerage fees from the states. i know its probably good business to seell alot of this stuff at one time, but to sell 2 whole manufacturing runs of this stuff right off the bat and short every other place out is crazy. i could see doing this after its been available for a while but so soon to do it. i just dont understand the logic behind it. its great for anyone near a Fry's store but anyone else gets shafted. Then reading this forum almost makes me cry just because i got to wait till next year, even tho its a month away, i dont know if i can take this.
lol
sorry guys , Were trying to get another production run in this year
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
Ask the missus..... :banana4:Originally Posted by trans am
Seriously though, loops memtest is the best way.
Neo2 Platinum | 3000+ @ 2400mhz (8x300 1:1) | 2x256 TCCD Patriot BXL @ 2.85v 2.5-3-3-7 | Zalman CNPS7000A-AlCu | TTGI 550 | 33sec 1M SuperPI
So Ol!ver, what did this mate manage to achieve with his sticks on NFII?
Bookmarks