http://koti.phnet.fi/lehtopa1/winchester.png
Stable, using neo2, zalman 7000a-cu. In need of new ram/ddr booster, have to run my mushkin bh-5 at 193MHz right now, killing a bit of the performance
http://koti.phnet.fi/lehtopa1/winchester.png
Stable, using neo2, zalman 7000a-cu. In need of new ram/ddr booster, have to run my mushkin bh-5 at 193MHz right now, killing a bit of the performance
OMGseeing these results makes me so curious what I'll get...
Next weekend I'll get my stuff (MSI K8N Neo2 board + 939 cpu... prolly 3200+)
:thumbsup:
-edit-
Can anyone tell me if that MSI board undervolts or not, please?
overvolting is the thing I don't mind
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
Just a screen!Originally Posted by IvanAndreevich
Full stable is 2750MHz @ 1,53V(good enough imho)
@Garrett
It overvolts a bit!
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Good thing GravediggA... btw nice stepping :thumbsup: I'm gonna look for 1 too... like I said... can't wait
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:....
Man.. look at these results! 2.7 Ghz is doable on water.. Mmm.
Charlie where are your jaw-dropping results?
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
Just got a winchester and gigabyte nf3 too! wish me luck on 3GHz. I may or may not hit 3GHz but I will surely try! If the max htt is 300 for that mobo, then 2.7 is all ill have. need 333ht cause max multi is 9.
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
just got 2 from Monarch, 3500+'s
both suck ass!
won't do 2.7ghz
it's never fast enough!
Hopefully the 3500+ winnie i'm ordering from ZZF.com works good.
Donate to XtremeSystems!
Workstation: Intel Core i7 4770, Asus Maximus VI Gene, 32GB Corsair Dominator Platinum DDR3-1866, eVGA SC GTX Titan, 256GB Crucial M4, Corsair HX850, Corsair H100i. Corsair Carbide 350D
Fileserver: 2x AMD Opteron 2425HE, Supermicro H8DME-2, 24GB DDR2-667, Supermicro 846TQ 24bay Chassis, Redundant 920w, 256 Crucial M4 boot, 20TB Storage
Notebook Asus Zenbook UX32VD-DH71, Intel Core i7 3517u, 10GB DDR3-1600, 256GB Crucial M4, Geforce GT 620M
GF4 what's the stepping?
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:....
winnies or nc? steppings pleasejust got 2 from Monarch, 3500+'s
both suck ass!
won't do 2.7ghz
sky / s!p - we are oldskool, dammit.
from monarch..
3200+ 90nm
0441TPAW
CBBFD
2.7ghz @ 1.6v on 29c ambient roomtemp - aircooled.
recently, for some reason people who've been getting chips from monarch are getting a lower week number than me.
new benching rig
mobo: dfi ultra-d rev. AD0
cpu: x2 3800+ @ 3.30 ghz
cooling: VapoLi SS by jinu117
stepping: LDBHE 0601 TPMW
mem: khx pc3200 1gig bh5's
psu: zippy emac 700watts
gfx: evga 7800gt @ 650/1355
hd: 36gb raptor + seagate 120gb
single 7800gt 3dmark05 WR!
3dmark05 - 10814
as soon as the cpu comes ill tell you the stepping. if you cant hit 2.7GHz, what is the max you hit? have you made sure your ram isnt the one holding you back? run it async just in case. I have been hearing stories how widely winchesters vary in overclock, very inconstant. I have seen them do anywhere from 2.3GHz to 2.8GHz on air 3dmark stable. I am not sure if charlie's 3GHz is 3dmark stable past 2.8 though. does it matter if its a 3000+ or 3500+ do they all have the same probability? because I saw one guy get 2.6GHz stable on his 3000+ and 2.7GHz was good enough for superPI only. Maybe I will get 3GHz like charlie did, who knows
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
winchesterwinnies or nc? steppings please
week 37
don't have stepping though. At least not on me!
it's never fast enough!
Winchester 0436 xpmw = ~2450 @ 1.7vcore on air Retail
Winchester 0437 wpmw = ~2500 @ 1.7vcore on air OEM
Both 3000+
Looks like you need a week 40+ for a shot at 2700mhz on air.
Edit: Scratch that, The 0437 did the same speed (2250) @ stock vcore as the 0436 and was priming at 2500 when I posted... but it keeps going up. I'm priming @ 2650 right now, so I'd say 2600 isn't too much to hope for stable on air out of it. Knock on wood.
Last edited by Lithan; 11-10-2004 at 12:02 PM.
Man.. look at these results! 2.7 Ghz is doable on water.. Mmm.
Charlie where are your jaw-dropping results?
Because of the Winny/Neo2/Subzero bug, I can't freeze the Winnie! 3G on air would have translated to 3.5gHz on LN2........
C
so your selling it for a fx55? some of those fx55 have the same issues like Jasons but Opainters doesnt as long as he uses win2003 and not 2000. fx55s also cost almost 900 bones
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
Which motherboard and memory are you using to achieve those kind of clocks? And where did you order your cpu's from?
I'm using the giga k8ns 939 ultra and BH5
The retail is from mwave
Oem is from monarchpc
Stable at 2600mhz for over 6 hrs @ 1.70vcore. Much better than the last. I'm quite pleased, though it's n0 3ghz on air.
Which chip is stable at 2600? Both of them?I'm using the giga k8ns 939 ultra and BH5
The retail is from mwave
Oem is from monarchpc
Stable at 2600mhz for over 6 hrs @ 1.70vcore. Much better than the last. I'm quite pleased, though it's n0 3ghz on air.
the OEM
OK
I finally checked it when I removed the Hyper6 for some...... "alternate" cooling, hehehehe...
It is:
CBBFD 0437VPAW
sweet!! mine is a CBBFD 0437MPMW !!!
got it from newegg... retail box... i ordered it monday night
6000@3.45, M2n-SLI, patriot XLLK
CBBFD 0437WPMW = 2600mhz @ 1.7vcore on air.
I would never run that much volts 24/7 anyway. whatever my cpu does on 1.5v be it. slightly higher for benches
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
If it's not running hot then 1.7v is fine.
Bedroom: D201GLY2, Celeron 220 (1.2ghz/512k cache); 1gb DDR2 PC-5300; Geforce 6200 PCI
-----------------
Gaming: Core 2 Duo E4500@2.93ghz (266x11); Abit IP35-E; 3gb Crucial Ballistix PC5300@400mhz (4-4-4-15); XFX Geforce 8800GS@680/800 10123 3dmark06
-----------------
HTPC: Athlon 64 X2 BE-2300 (1.9ghz); ECS mATX mb; 2gb Crucial PC5300; Radeon HD2600 Pro 256mb (DXVA HA in BD and HD-DVD)
Originally posted by Thunderbird1Ghz(Geforce4Ti4200) at Sharky Forums
And you arent gonna believe this, but that DVD rom will even read regular CD roms!!!!!!!
wow, these are some incredible speeds. I cant wait to get my winnie and msi k8n. Just gotta wait for the paycheck to come...
Posting Permissions
Reply With Quote
Bookmarks