post you A64 tweaker/ATi tool mem timings

[bradpit999]

which is the better off the 2 utilitys I realise there are 20 or so settings and wanted a shortcut to some baseline settings ??


I have a

FX-53
Msi Neo 2 Platinum
2x 256 MB Muskin level II
Xt800
Tagan 480


I can obviously run 6/2/2/2 up to 210 everything supper tight and agresive bt want to see if slightly relaxed and using this tool will take me over 30k

[wolfgang]

I dont know how one can be better than the other. When they do totally different things.

[macci]

ATITool sets your video card mem latency, A64 tweaker tweaks system RAM

[bradpit999]

ATITool sets your video card mem latency, A64 tweaker tweaks system RAM

No.................. the ATi tool has a tab for memory changes................... it trully does and gives you similar if not identical mem options to A64 tweaker



are we saying the A64 tweaker is the weapon of choice then................ does anyone have some settings i could apply to it

[wolfgang]

ati tool has a tab for memory changes for the video cards memory not your system ram. a64 tweaker has timmings for your system ram.

[Poki]

Those memory settings are not for system ram on ATITool. They ARE video card ram timings.

[bradpit999]

ok i apolagise................... the number look similar to the numbers if it were for system memory timings................ doea anyone have the settings they use then for the A64 teaker then ??? who can sare there settings with me

[blinky]

No.................. the ATi tool has a tab for memory changes................... it trully does and gives you similar if not identical mem options to A64 tweaker



are we saying the A64 tweaker is the weapon of choice then................ does anyone have some settings i could apply to it

haha u just told off macci




back on topic, look in the A64 tweaker sticky for good timings, and yes there needs to be a thread on the best timings for different video mem chips samsung 1.6ns, hynix 2.5ns etc.

[bradpit999]

haha u just told off macci




back on topic, look in the A64 tweaker sticky for good timings, and yes there needs to be a thread on the best timings for different video mem chips samsung 1.6ns, hynix 2.5ns etc.

I didnt tell macci off................... lol

i thought i new what i was talking about and i obviously didnt.................. simple mistake

[kromosto]

dont worry ram is ram and timing is timing

[blinky]

I didnt tell macci off................... lol

i thought i new what i was talking about and i obviously didnt.................. simple mistake

im joking man, relax, and have a beer

[bradpit999]

anyone going to give me a list off usable fast and stable settings...................... come on guys i cant belive i am the only one who would find this really beneficial :banana4:

[craig588]

The timings in my sig are something to strive for. I can even take a few of them even lower just for benching.

[bradpit999]

when i try and load them timings.................. i get the system locked up when i press the SET button.....................seems strange as the mem voltage is 2.85 and it is BH5

[CodeRed]

when i try and load them timings.................. i get the system locked up when i press the SET button.....................seems strange as the mem voltage is 2.85 and it is BH5

Experiment, 2.85V aint much for BH5

Try one setting at a time and see whats holding you back. It takes time but is worth it

[kromosto]

2.85 with bh5 is nothing bh5 starts doing something after 3.0 volt

[ugp]

OMG! That was funny. I thought a fight was going to break out in here 'Thread Style'