Edit
Any suggestion?
Edit
Any suggestion?
Last edited by Onepagebook; 05-26-2005 at 05:14 PM.
looks very promising, but how about adding some 'sexy' heat-spreaders for the GSkill RAM?!
BTW, it would be nice to see some DDR600 though
OCing with Arabian Style
heatspreaders actually make the RAM more warm. You can overclock a little more without them.
if there's one thing i noticed about these tccd chips, they do not get very hot. They just feel warm. To add a heatspreader to the gskill might be a waste and plus they would have to up their prices to accommodate the changeOriginally Posted by naelq
can u test with OCZ platinum pc3200 rev.2 sometime?
nice tests, ill be picking up some G.Skil mem soon
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Jesus, that's amazing bandwidth for $250 memory. GSkill low budget DDR doing better than other high end DDR? Is that TCCD on the GSkill budget DDR?
And where did you get it?
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
so the ocz scores 40mb/s worse at DDR500 even though its running with the same timings? hmmm interesting!
the gskill is tccd right? and the ocz is hynix i guess? hmmmm
but this was not an average stick of gskill, right? it was an enginerring/review sample, right? or is it a regular retail pack?
Originally Posted by saaya
it's just random select from retail package..
wow....
where did you buy it? *pulls out wallet*
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
Originally Posted by Torin
I don't know if I can bring it here.
Last edited by Kazoo; 10-13-2004 at 04:13 PM. Reason: Link to seller not allowed in this forum.
wooohooo, that gskill is some great stuff. wish i could get my hands on some good job
3.4c@4590(270x17)vapo LS
el gold pc4000(1:1, 3.2v)
abit ic7-g modded
sapphire 9800 pro(awaiting eVGA 6800u)
F1-3200dsu2-1gbld ?
Edit: That leads to another question, what's the difference between the 1GBLD, 1GBLC and 1GBLE other than price? All use TCCD...
Edit #2: I noticed it is 1GBLD from one of your pics...
Last edited by Torin; 10-13-2004 at 03:02 PM.
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
wow thats amazing , Let me post a comparison of OCZ to GSkill of my own LOL
Note: As you can see , its nice that you come in and post what your companies product can do here , in fact I do it all the time.
but comparing it to your competitors , well that might be a little to biased
Then again , I might be wrong , In which case I better get to benchmarking
Last edited by ryanpgroovy; 10-13-2004 at 03:39 PM.
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
no, i think your right ryan. 1pagebook, i think your going a bit too far advertising your memory :/
Originally Posted by saaya
I am sorry, but I just try to post what I ha, I did not have that much bias.
I do apologize for all you guys feel that way.
Thanks for the benchmarks and I must agree with others as this is crossing the line into marketing/advertising.
I feel that one of this sites appeal is the lack of adverts and banners. I suggest contacting the top benchmarkers found here and offering memory samples for them to bench with. if your product is best of show they will sport the product name in the benchmark submissions. This is standard procedure.
I will allow the benchmarks but any further marketing will be frowned upon. I need to be fair to the other memory manufacturers and keep the site clean.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Nice results..
damzn that 3500+ 90nm is that 3GHz @1.5v
Well...I tested OCZ and Gskill and not being biased in anyway :p the OCZ did better...LOL,It all depends on how you tweak it :banana4: , with 3-4-3-10 1T doing 294fsb or so with the OCZ modules and the Gskill not fairing quite as well.I also see a lot of benches with 256 modules Vs 512 which is always biased to the 256's as they create less load.
Its ok posting benchmarks but only post your own and leave the reviews to reviewers .
Last edited by Tony; 10-13-2004 at 04:32 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
well its nice to have you guys post some sick numbers and cool ocs advertising your new lines of memory, but lets not go down to the "mine is better than theirs" level.
as you said tony, thats best to be decided by reviewers and end users.
LOL... Send Saaya some ram please!!!!!! We *need* some quality posts from him.
I'm sure he would love a new kit to go with his new mb/cpu combo whenever he gets it.
GA-P35-DS3L no more than 450fsb w/1333 chip
E6550 stuck at 3150
V-DATA 2x1gb
MSI 7900GS 512 3Dmark score in near future
Old A64 scores2001 39,707 3D03 23,768 3D05 11,394 3D06 5914
LOL
i feel honored thx
each company is going to put forth the best it can
frankly ive found some of bigtoe, and ryans posts to be verging on advertisements
im glad you guys want to address that. im fine with people displaying their product, but let the reviewers do the reviewing
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
The pics seem to be down...
Less is more.
I'm reviewing G. Skill now and hopefully will have my cpu issues sorted out soon. Seems my 3200+ 939 chip doesn't like 1T over 260mhz and my FX starts to get flakey at 1T over 270-280mhz. I can attest the G.Skill I was sent can run up to 280mhz fine with only problems being my own limitations. I feel the ram could probably go 285. this is at 2.65v and timings of 2.5 3:3:7.
Also, I do feel that posting comparisons to competitors ram is going to be frowned upon. Too much incentive to bias results, either intentionally or unintentionally.
I am hoping to review the 3700 Platinum if Ryan or OCZ would be kind enough to send me a kit. However, that is beyond my control.
I have purchased Opp's FX53 so I hope to resolve my bottleneck shortly and be back to high end benching soon.
it's never fast enough!
more interesting comparison done on same MSI Neo2 s939 board at http://www.anandtech.com/memory/show...px?i=2235&p=20 and http://www.anandtech.com/memory/show...px?i=2235&p=19
Last edited by eva2000; 10-13-2004 at 11:55 PM.
---
Bookmarks