What air cooler are you using, and what temps are you getting? That's simply amazing.Originally Posted by esoteradactyl
my 3500+ 90nm seems to be doing very good also. ive got it up to 2.75ghz on air with just a small bump in voltage. time to slap it under the ls
Bedroom: D201GLY2, Celeron 220 (1.2ghz/512k cache); 1gb DDR2 PC-5300; Geforce 6200 PCI
-----------------
Gaming: Core 2 Duo E4500@2.93ghz (266x11); Abit IP35-E; 3gb Crucial Ballistix PC5300@400mhz (4-4-4-15); XFX Geforce 8800GS@680/800 10123 3dmark06
-----------------
HTPC: Athlon 64 X2 BE-2300 (1.9ghz); ECS mATX mb; 2gb Crucial PC5300; Radeon HD2600 Pro 256mb (DXVA HA in BD and HD-DVD)
Originally posted by Thunderbird1Ghz(Geforce4Ti4200) at Sharky Forums
And you arent gonna believe this, but that DVD rom will even read regular CD roms!!!!!!!
my 3500+ 90nm seems to be doing very good also. ive got it up to 2.75ghz on air with just a small bump in voltage. time to slap it under the ls
That is very sweet man , what cooler and mobo please
I am looking for a good s939 mobo , and cooler for my new 3500+ that is coming
but then again, if all the 130nm week 430+ chips are doing 2.7 on airlike them new magic fx-53s, then this is nothin special
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Why he hide the week and batch numbers? Perhaps is a 0439 0001?
|| Core 2 Quad QX6850 ES @ 3.5Ghz 1.35V || Thermalright Ultra 120 || Asus P5K3 Deluxe || Gskill F3-12800CL7D-2GBHZ
|| XFX 8800GTX || Dell 2005FPW 20" || Ultra X-Pro 750W LE || 3 x WD 320GB SD + 1 x Hitachi 500GB
you sell it?
Yes 10 bucks says its the Epox board! That would be why he never said anything about it cause he's too busy overclocking.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
He suggested NOT to buy the Epox. From the look of the BIOS, it looks like the MSI.
A wiseman once said, "If Bible proves the existence of God, then comic books prove the existence of Superheros."
Alrighty then.. I still dont understand why post about the Epox board and not give any indications as to why not to buy that board.. Seems wrong.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Air cooling? I'm not familiar with that??
What's air cooling? This is xtremesystems afterall.
if i had a good K8 cooler it would be in the mail to you now!
nice work there, thats amazing! does the chip have more left in it?
Dell Studio XPS16... no desktop
yes i have AIM, yes you can send me a message. EvilSpork3 i dare you.
i was using a stock cooler and a msi neo2. it wasnt completely stable at that speed. but 2.7 seems pretty stable. ive been busy and havent had alot of time to mess with it.
i had a hell of a time trying to get my ls to work with the neo2. i tried using it a few days ago with no luck. then i read a thread about having to use a second psu in order for it to work. so i tried that last night and got it up and running but it would hard lock when the ls got to it's coldenst point. it was very strange. anything below -20c and i would get a hard lock
Onepagebook did you have any trouble with your ls??
Onepagebook, could you test with higher VCore (1.6 for example
and btw: is the IHS still on it?
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
I have got to stop reading these threads, or at least get the wife to hide all the credit cards. Like the others though, I can't wait to see some more results with these chips on air cooling.
That is a hell of a nice overclock and bandwidth though, and doing it all at that level of voltage just tops it off.
All those pretty red Xs...
Anyone else missing the pics? I'd love to see those numbers.
It was doing 3GHz at only 1.4V with a whole bunch of benches in the background suggesting it is stable. It had 79xxMBs of bandwidth in sandra.
For those of you about to post:
What happened to all the pics? I can't see any of them atm.
there's a shop where I can buy this processor???
or when arrive it in europe (italy)
Cant wait to see what the chip can really do. Sweet
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Overlockers.co.uk have the 3000+ in stock, and 3200+ available for preorder.there's a shop where I can buy this processor???
or when arrive it in europe (italy)
Sandy Bridge incoming.
Guys...sorry for all the x shhowing on my pics..
should be fixed already.
oh thanks 10000
Killa CPU!!!Very nice!Time to grab such a nice 0,09µm
what board are you using
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
MSI K8N Neo2
what happened to the Epox board?
Shuttle SN95G5
Posting Permissions
Reply With Quote
Bookmarks